Add a minor enhancement to GEO-redundancy. Output an informative message
after running below out-of-sync operations, informing the operator that
a sync command should be executed.
Adding subcloud(s) to the SPG.
Removing subcloud(s) from the SPG.
Updating subcloud(s) in the SPG.
Test plan:
Pre-Steps: 1. Create the system peer from Site A to Site B
2. Create System peer from Site B to Site A
3. Create the subcloud peer group in the Site A
4. Add subcloud(s) to the peer group
5. Create peer group association to associate system peer
and subcloud peer group - Site A
6. Check current sync status on Sites A and B. Verify
they are 'in-sync'.
PASS: Verify that the corresponding informative message is printed out
after running below out-of-sync operations:
1. Adding subcloud to the SPG.
2. Removing subcloud from the SPG.
3. Updating subcloud in the SPG, for example, bootstrap address,
bootstrap values or install values.
PASS: Verify that informative message is not printed when running any
operation on the sublcoud which does not belong to an SPG.
Depends-On: https://review.opendev.org/c/starlingx/distcloud/+/909277
Closes-Bug: 2054124
Change-Id: I1614a719190b2645eb8139b158b0bab257d0f91d
Signed-off-by: lzhu1 <li.zhu@windriver.com>
This commit addresses the issue encountered when updating the
subcloud fields directly with a file introduced by [1]. This
caused issues because the file would be closed, making the content
inaccessible. Now, we update the fields using the file content.
An intermittent error, introduced by [2], was fixed in the
test_prestage_with_subcloud_id test.
[1]: https://review.opendev.org/c/starlingx/distcloud-client/+/909454
[2]: https://review.opendev.org/c/starlingx/distcloud-client/+/909975
Test Plan:
PASS: Create a subcloud
PASS: Update a subcloud
PASS: Create a subcloud backup
PASS: Subcloud deploy create
PASS: Subcloud deploy upload
Closes-bug: 2055446
Change-Id: Ib8b831353dba9d073131eb1c12ccd57513c63e7f
Signed-off-by: Hugo Brito <hugo.brito@windriver.com>
Fixed some class names that were in snake_case because
it's not right according to PEP8/PyLint. Now they're all camelCase.
Also, did a direct assignment to client_manager attributes.
Test Plan:
PASS: Run tox command.
- pylint success
- pep8 success
- py39 success
PASS: Check if all commands are working properly.
Closes-bug: 2053023
Change-Id: Iba489e23eb27015f27c6b8d5231f5d6002fa6876
Signed-off-by: Hugo Brito <hugo.brito@windriver.com>
This commit enables the `R` (refactor) checkers in `pylint`
configuration. This will help ensure code maintainability
and adherence to best practices.
Black formatter was applied in the modified files.
Test Plan:
PASS: Execute tox command
- pylint success
- py39 success
- pep8 success
Partial-Bug: 2053023
Change-Id: I9946eaee33e4691fc212a852079ba0ca851a6ccd
Signed-off-by: Hugo Brito <hugo.brito@windriver.com>
Cleanup the tox configuration and requirements.
Black formatter was applied in the modified files.
Test Plan:
Verify that all Tox tests pass without errors.
1. Successfully executed on the distributedcloud dir
- tox -e docs,releasenotes,api-ref,bandit,linters
- tox -e newnote -- new-note
2. Successfully executed on the distributedcloud/distributedcloud dir
- tox -e py39,pylint,pep8,cover
Partial-Bug: 2053023
Change-Id: Ib25f31f8607e46e51dfbda0a6b3a36e9e11151df
Signed-off-by: Hugo Brito <hugo.brito@windriver.com>
In this commit, the dcmanager subcloud show command was updated
to display region_name as default.
Test Plan:
PASS: run dcmanager subcloud show <subcloud name> and verify that
region name is displayed
PASS: run dcmanager subcloud show <subcloud name> -d and verify that
region name is displayed
Closes-bug: 2054803
Change-Id: I4481b34a9406d84c28f0230385eee79b9cc82753
Signed-off-by: Christopher de Oliveira Souza <Christopher.DeOliveiraSouza@windriver.com>
Added a new command: dcmanager software-deploy-strategy to
manage software orchestration. This command requires
a --release-id parameter for specifying the release to deploy.
Test Plan:
1. Verify that command software-deploy-strategy create without
--release-id option fails
2. Verify that command software-deploy-strategy create --release-id
is processed successfully
3. Verify that command software-deploy-strategy show/delete/abort/apply
is processed successfully.
Story: 2010676
Task: 49548
Depends-On: https://review.opendev.org/c/starlingx/distcloud/+/908538
Change-Id: I389bac227833b5f63e19a136d0f13b75f9fb8866
Signed-off-by: Hugo Brito <hugo.brito@windriver.com>
The prestage release can be either the previous or current release for
a subcloud. Checking the prestage release individually on thousands of
subclouds is impractical. Therefore, a new column called "prestage
versions" is added to the output of the "dcmanager subcloud list'
command. Besides, decoupling prestage status from deploy status.
This commit also introduces the following changes:
- 'backup datetime' column removal and addition of 'prestage status'
column to 'dcmanager subcloud list' output.
- 'dcmanager subcloud show' and similar commands now display 'prestage
status' and 'prestage versions' columns in their output.
- New '-d/--detail' option is added to 'dcmanager subcloud list' to
display all columns of the subclouds.
- '-c/--column' option of 'dcmanager subcloud list' can be used to
specify the column(s) of the subclouds. eg. -c column1 -c column2 ...
Test plan:
PASS: Verify the correct "prestage status" and "prestage versions"
output of the "dcmanager subcloud list" command.
PASS: Verify the correct output of the new arguments -d/--detail and
-c/--column.
Depends-On: https://review.opendev.org/c/starlingx/distcloud/+/904541
Story: 2010611
Task: 49369
Change-Id: I8d127220fcd705dca542afeca2ac8f19f20172a1
Signed-off-by: lzhu1 <li.zhu@windriver.com>
This commit removes "subcloud migrate" command since
"subcloud-peer-group migrate" command can be re-executed to migrate
a single subcloud that failed to migrate in the previous attempt.
Test Plan:
PASS - Verify that "dcmanager subcloud migrate" and "dcmanager help
subcloud migrate" return an error (dcmanager: 'subcloud migrate'
is not a dcmanager command. See 'dcmanager --help'.)
Closes-Bug: 2049336
Change-Id: I793bee7d680d59a4d29a585c88c8c1689976ee1b
Signed-off-by: Zhang Rong(Jon) <rong.zhang@windriver.com>
This commit adds the subcloud deploy delete command to dcmanager client.
It's used to delete deploy files under /opt/platform/deploy.
Usage:
dcmanager subcloud deploy delete
dcmanager subcloud deploy delete --release <Release_Version>
dcmanager subcloud deploy delete --prestage-images
dcmanager subcloud deploy delete --deployment-files
Test Cases:
1) PASS: Verify the deployment files were deleted belonging to
the specified release.
2) PASS: Verify the deployment files were deleted belonging to
the active release when the '--release' not present.
3) PASS: Verify the prestage images list file deleted when the
'--prestage-images' present.
4) PASS: Verify the deploy overrides, deploy chart, deploy playbook
files deleted when '--deployment-files' present.
5) PASS: Run 'dcmanager subcloud deploy delete' and verify that the
correct API call is made.
Depends-On: https://review.opendev.org/c/starlingx/distcloud/+/901112
Story: 2010718
Task: 49190
Change-Id: I38961a584b5e295580eae0a5d80549732ed591c8
Signed-off-by: Swapna Gorre <swapna.gorre@windriver.com>
Given that the non-primary association is automatically
generated, it is necessary to introduce a type indicator to
differentiate between primary and non-primary associations.
This commit aims to incorporate the association type when
listing and retrieving details of the association.
Test Plan:
- PASS: The command "dcmanager peer-group-association list"
display the type information of the each association,
indicating whether it is primary or non-primary.
- PASS: The command "dcmanager peer-group-association show"
will include the "association_type" attribute.
- PASS: The association add/update/sync commands will include
the association_type attribute.
Closes-Bug: 2046809
Depends-On: Ia917d0dc7c65fbea1e222fb52dbec79fdbe65b65
Change-Id: I4d55700f85956c785760b2cc0a5e2ea13a180c22
Signed-off-by: Zhang Rong(Jon) <rong.zhang@windriver.com>
Fix availablity-state field is missing of system peer
Test Plan:
- PASS: Create/Update the system peer check the availability-
state is exist in CLI.
- PASS: Get details of the system peer check the availability-
state is exist in CLI.
Closes-Bug: 2045717
Depends-On: I497e3d21355c08d000a77965e6a6f36c6f483936
Change-Id: I07268732b9fab22a21e32dee8f22cc615f372461
Signed-off-by: Zhang Rong(Jon) <rong.zhang@windriver.com>
This commit adds the --migrate option to the subcloud unmanage command,
besides unmanaging the subcloud it also changes its deploy status to
'rehome-pending'. It should be used when unmanaging a subcloud before
the rehoming/migration operation. This new status will then be used by
cert-mon to determine when it should stop auditing an unmanaged
subcloud, to avoid certificate issues during the rehoming operation.
It's only possible to use this option when the subcloud's deploy status
is 'complete'. It's possible to manage it back in case the rehoming
operation is not going to be executed anymore; in this case the
deploy-status will be reverted back to 'complete'.
Example usage:
dcmanager subcloud unmanage --migrate subcloud1
Test Plan:
1. PASS - Unmanage a subcloud without --migrate and verify that it
still works and that cert-mon continues to audit it;
2. PASS - Manage a subcloud, verify that the operation still works as
expected;
3. PASS - Try to unmanage with --migrate when the subcloud's deploy
status is different than 'complete' and verify that it
doesn't allow it;
4. PASS - Unmanage a subcloud using the --migrate option and verify
that its deploy status changes to 'rehome-pending', all the
sync statuses change to 'unknown', and that cert-mon stops
auditing the subcloud;
5. PASS - Manage a 'rehome-pending' subcloud and verify that it
succeeds while also reverting its deploy_status to
'complete';
Depends-on: https://review.opendev.org/c/starlingx/distcloud/+/900288
Story: 2010852
Task: 49060
Signed-off-by: Gustavo Herzmann <gustavo.herzmann@windriver.com>
Change-Id: I1d761c1a0ae401a11443d80df70338acb2a0a14a
Add dcmanager peer-group-association management CLI.
This commit add peer-group-association CMD of
add/delete/update/show/list/sync
list-subcloud-peer-groups of a system-peer
CLI example:
dcmanager peer-group-association add --peer-group-id 1
--system-peer-id 1 --peer-group-priority 99
dcmanager peer-group-association list
dcmanager peer-group-association update --peer-group-priority 90
dcmanager peer-group-association show 1
dcmanager peer-group-association sync 1
dcmanager peer-group-association delete 1
dcmanager system-peer list-subcloud-peer-groups 1
Test Plan:
1. PASS - Create a peer-group-association and verify the successful
creation of the peer site's subcloud-peer-group;
2. PASS - Run the add command without providing the required
parameters. Verify that the command fails with the
correct error message;
3. PASS - Verify that the `system-peer list-subcloud-peer-groups`
command retrieves the expected subcloud-peer-groups;
4. PASS - Successfully update the peer-group-priority of a
peer-group-association using the `dcmanager
peer-group-association update` command;
5. PASS - Test `dcmanager peer-group-association sync` command and
verify the peer site successful synchronization;
6. PASS - Test `dcmaanger peer-group-association delete` command and
verify successful deletion;
7. PASS - Test 'dcmanager peer-group-association list' command;
8. PASS - Test 'dcmanager peer-group-association show' command;
9. PASS - Test the help output of all commands and verify its
correctness.
Story: 2010852
Task: 48507
Depends-On: I41c16a8ab13e60f5b1de5b05fbbc51821f7f8d57
Change-Id: Ice15721c9674685a770116adad4f9a2d2ae712e0
Signed-off-by: Zhang Rong(Jon) <rong.zhang@windriver.com>
Remove rehome_data from command:
dcmanager subcloud show SUBCLOUD
Test Plan:
PASS - dcmanager subclouds show SUBCLOUD
can show items without rehome_data
Story: 2010852
Task: 49035
Change-Id: I62d73757196f499839c1cc9c0b8a9e616388cf7b
Signed-off-by: Wang Tao <tao.wang@windriver.com>
Change "dcmanager system-peer add --heartbeat-failure-policy
--administrative-state" to choice;
Change "dcmanager system-peer update --administrative-state" and
"dcmanager system-peer update --heartbeat-failure-policy" to
choice.
Test Plan:
1. PASS - Run 'dcmanager system-peer add --heartbeat-failure-policy
--administrative-state' with correct choice and verify
that the command work as expected;
2. PASS - Run 'dcmanager system-peer update --administrative-state'
'dcmanager system-peer update --heartbeat-failure-policy'
with correct choice and verify that the command work as
expected;
3. PASS - Run 'dcmanager system-peer add --heartbeat-failure-policy
--administrative-state' with wrong choice and verify
that the error message prompted;
4. PASS - Run 'dcmanager system-peer update --administrative-state'
'dcmanager system-peer update --heartbeat-failure-policy'
with wrong choice and verify that the error message
prompted;
5. PASS - Verify 'dcmanager help system-peer add' and 'dcmanager
help system-peer update' output the correct messages.
Story: 2010852
Task: 48487
Change-Id: I626fc0ccd156224e643940d208848ba832ccf25d
Signed-off-by: Zhang Rong(Jon) <rong.zhang@windriver.com>
peer
Remove "dcmanager subcloud-peer-group add --group-priority" and
remove "dcmanager subcloud-peer-group update --group-priority"
from CLI. This command is not supposed to be used by end user;
Add heartbeat_status into the "dcmanager system-peer show".
Test Plan:
1. PASS - Run 'dcmanager subcloud-peer-group add --group-priority'
and verify that the error message prompted;
2. PASS - Run the normal 'dcmanager subcloud-peer-group add' (without
--group-priority) and verify that the command work as
expected;
3. PASS - Run 'dcmanager subcloud-peer-group update --group-priority'
and verify that the error message prompted;
4. PASS - Run the normal 'dcmanager subcloud-peer-group update'
(without --group-priority) and verify that the command work
as expected;
5. PASS - Run 'dcmanager system-peer show' and verify that the
command show the heartbeat status;
Story: 2010852
Task: 48970
Task: 48971
Change-Id: Ia50280b7678374793eb4785767de1564cfa84e4e
Signed-off-by: Zhang Rong(Jon) <rong.zhang@windriver.com>
This commit adds a new option --upload-only to dcmanager
upgrade-strategy create. If this option is used, the releases
are uploaded to the subclouds and the strategy state is set to complete.
Depends-on: https://review.opendev.org/c/starlingx/distcloud/+/894170
Test Plan:
1. PASS - Run dcmanager help upgrade-strategy create and verify
that the --upload-only argument is present.
2. PASS - Create and apply a patch strategy using the --upload-only
option and verify that the strategy completes after uploading
the patches to the subclouds.
3. PASS - Create and apply a patch strategy without using the
--upload-only option and verify that the strategy continues
after uploading the patches to the subclouds.
4. PASS - Verify that the CLI output of dcmanager upgrade-strategy
create/delete/show/abort/apply contains the 'upload only' field.
Story: 2010676
Task: 48746
Change-Id: I3ab70ff7287ae54fa4c407ef0f3c15784bfc19a6
Signed-off-by: Christopher Souza <Christopher.DeOliveiraSouza@windriver.com>
Remove "dcmanager subcloud add --secondary"
from CLI. This command is not supposed to be used by
end user.
Test Plan:
1. PASS - Run 'dcmanager subcloud add --secondary' and verify that the
error message prompted;
2. PASS - Run a normal 'subcloud add' (without --secondary) and verify
that the command work as expected.
Story: 2010852
Task: 48818
Signed-off-by: Wang Tao <tao.wang@windriver.com>
Change-Id: Ib3069797a9dcb90242e7eb8ec2584d1b2faf38d4
Group of the current managed subclouds which are supposed
to be duplicated in a peer site as secondary subclouds.
This commit add subcloud-peer-group CMD of
create/delete/update/show/list/
list-subclouds of a subcloud-peer-group
Update subcloud update --peer-group PEER_GROUP
command
CLI example:
dcmanager subcloud update SUBCLOUD
--peer-group PEER_GROUP
dcmanager subcloud-peer-group add \
--peer-group-name NAME
dcmanager subcloud-peer-group delete PEER_GROUP
dcmanager subcloud-peer-group list
dcmanager subcloud-peer-group list-subclouds PEER_GROUP
dcmanager subcloud-peer-group migrate PEER_GROUP\
--sysadmin-password PASSWORD
dcmanager subcloud-peer-group show PEER_GROUP
dcmanager subcloud-peer-group status PEER_GROUP
dcmanager subcloud-peer-group update PEER_GROUP
[--peer-group-name PEER_GROUP_NAME]
[--group-priority GROUP_PRIORITY]
[--group-state GROUP_STATE]
[--max-subcloud-rehoming MAX_SUBCLOUD_REHOMING
Test Plan:
1. PASS - Create a subcloud-peer-group
2. PASS - Add a subcloud, update the peer-group-id as a existing
subcloud-peer-group successfully;
3. PASS - Verify subcloud-peer-group list-subclouds can get the expected
Subcloud above successfully;
4. PASS - dcmanager subcloud-peer-group update PEER_GROUP_NAME
--group-priority/--group-state/--max-subcloud-rehoming
of a subcloud-peer-group successfully;
5. PASS - 'dcmanager subcloud-peer-group status' and verify the status
was retrieved successfully.
6. PASS - 'dcmaanger subcloud-peer-group delete' and verify
the peer group is deleted successfully.
7. PASS - Test 'dcmanager subcloud-peer-group show' command
8. PASS - Test 'dcmanager subcloud-peer-group list' command
9. PASS - Test the help output of all commands and verify that
the output is correct.
10.PASS - Test the commands 'dcmanager subcloud-peer-group migrate
PEER_GROUP' without passing the argument and verify that
it prompts for the password.
Story: 2010852
Task: 48490
Task: 48491
Depends-On: I93d0808b8cf02eba0e6f687007df42e2d2ea1848
Depends-On: I5f7e8862e543d61f49a5456f989c94689db83318
Change-Id: I57ae769c179dd4e613ce4edd432692540deea678
Signed-off-by: Wang Tao <tao.wang@windriver.com>
This change adds the capability to rename the subcloud after
bootstrap or during subcloud rehome operation on CLI.
It also allows to do a subcloud rehoming by changing the
subcloud name from the command line.
Usage for subcloud rename:
dcmanager subcloud update <subcloud-name> --name <new-name>
Usage for subcloud rehoming:
dcmanager subcloud add --name <subcloud-name> --migrate ...
Depends-On: https://review.opendev.org/c/starlingx/distcloud/+/885832
Test Plan:
PASS: Run dcmanager subcloud add with --name parameter
in order to validate error message because it is not
allowed to change the name in the subcloud add
process
PASS: Run dcmanager subcloud add without --name parameter
in order to validate legacy subcloud add process
PASS: Run dcmanager subcloud update with --name parameter
supplying different subcloud name
PASS: Run dcmanager subcloud update with --name parameter
supplying the same name of an existing subcloud
in order to validate the error message
PASS: Run dcmanager subcloud add with --migrate and --name
parameters supplying a new subcloud name
PASS: Run dcmanager subcloud add with --migrate and --name
parameters supplying an existing subcloud name
in order to validate error message
PASS: Run dcmanager subcloud add with --migrate and
without --name parameter to get the name from
bootstrap file and validate subcloud migration process
PASS: Run dcmanager subcloud show and subcloud list to
validate same current output
PASS: Run dcmanager subcloud show --detail to validate
new region_name field in detailed list
Story: 2010788
Task: 48216
Signed-off-by: Cristian Mondo <cristian.mondo@windriver.com>
Change-Id: Ib7d7729251b0540a76b8983131c68efe2e47d68a
Raise a DCManagerClientException to exit from the deploy
upload command handler when an invalid
file arg is encountered. Otherwise, exiting the method
with a simple return results in:
- an exit code of 0 (a non-zero exit code is expected)
- Output of an empty deploy table
(SubcloudDeployUpload is a subclass of DCManagerShowOne.
A simple return is interpreted as success, hence a console
output of an empty result is displayed)
Overall, this behavior is misleading as it indicates success
despite the failure. This behavior is specific to the file arg
check (client-side validation done prior to the endpoint call).
Backend errors have been verified to be handled properly,
with a non-zero exit code.
Test Plan:
Using deploy upload (dcmanager subcloud-deploy upload):
1. PASS: Execute the command with valid
arguments (correct file references); verify a zero exit code
(“echo $?”) and console output displaying the
deploy table.
2. PASS: Execute the command with an invalid argument
(missing reference file); verify a non-zero exit code
(“echo $?”), no deploy table console output and an
error message “ERROR (app) <arg> does not exist: <file>”
Closes-Bug: 2032970
Change-Id: I53da00a1ba4562aae4345ea1182ca923d227d0e8
Signed-off-by: Salman Rana <salman.rana@windriver.com>
This change the default docs language conf to 'en'
instead of None.
Closes-Bug: 2033542
Change-Id: I8a6a5656f9e6993609a43a521547e3d84fd09c77
Signed-off-by: Victor Romano <victor.gluzromano@windriver.com>
This commit deprecates the dcmanager subcloud reinstall and reconfig
in favor of the new 'dcmanager subcloud redeploy' and 'dcmanager
subcloud deploy config' commands, respectively.
Test Plan:
1. PASS - Run dcmanager subcloud reinstall and verify that it returns
the deprecation notice instructing the use of 'dcmanager
subcloud redeploy';
2. PASS - Run dcmanager subcloud reconfig and verify that it returns
the deprecation notice instructing the use of 'dcmanager
subcloud deploy config';
Story: 2010756
Task: 48571
Change-Id: I1bf456c48ea6d2784e8369b375197f37ab7c598c
Signed-off-by: Gustavo Herzmann <gustavo.herzmann@windriver.com>
Add dcmanager system-peer management api.
Test Plan:
1. PASS - Verify that cloud manage system-peer
through api successfully.
2. PASS - Run the add command without providing the password
and verify that the CLI asks for it.
3. PASS - Run the add with every possible parameter and verify
all of them were successfully passed to the backend.
4. PASS - Verify dcmanager help output the correct help messages
for each command.
CLI example:
dcmanager system-peer add --peer-uuid 800503ca-21c1-40b2-9425-88319185fe61
--peer-name dc-0 --manager-endpoint http://128.128.128.1:5000/v3
--peer-controller-gateway-address 192.168.205.1
(peer's uuid from the peer site `system show` command)
dcmanager system-peer list
dcmanager system-peer update --administrative-state enabled 1
dcmanager system-peer show 1
dcmanager system-peer delete 1
Story: 2010852
Task: 48487
Depends-On: I349cd24bccc732eb8ed56df9346185cfce7b2570
Change-Id: I7ea22991d8ea879af7401e10b058e7ee44cd6a8d
Signed-off-by: Zhang Rong(Jon) <rong.zhang@windriver.com>
Add "subcloud migrate" to rehome a 'secondary' state
subcloud.
Update "dcmanager subcloud add --secondary" command
Update "dcmanager subcloud update --bootstrap-address
--bootstrap-values"
to save data for day-2's rehome/migrate purpose.
Update "dcmanager list subcloud --all" include show
'secondary/secondary-failed' subclouds
Update result of "subcloud show",
add rehome_data section.
Usage:
dcmanager subcloud add --secondary
--bootstrap-address IP
--bootstrap-values [yaml file]
dcmanager subcloud update SUBCLOUD
--bootstrap-address IP
--bootstrap-values [yaml file]
dcmanager subcloud list --all
dcmanager subcloud show SUBCLOUD
dcmanager subcloud migrate SUBCLOUD
--sysadmin-password PASSWORD
Test Plan:
1. PASS - Verify that the dcmanager help subcloud migrate shows
the correct help message;
2. PASS - Run 'dcmanager subcloud add --secondary' and verify that the
correct API call is made;
3. PASS - Run 'dcmanager subcloud update --bootstrap-address
--bootstrap-values' and verify that the
correct API call is made;
4. PASS - Run 'dcmanager subcloud migrate' and verify that the
correct API call is made;
5. PASS - Verify that the subcloud name/id parameter is required.
Story: 2010852
Task: 48489
Task: 48504
Depends-On: I9a308a4e2cc5057091ba195c4d05e9d1eb4a950c
Change-Id: Idd10267370dd2cd562c6eacc0d24c47cf68e9fd5
Signed-off-by: Wang Tao <tao.wang@windriver.com>
This commit adds the command "subcloud redeploy" to
dcmanager client.
Usage:
dcmanager subcloud redeploy
<subcloud-name-or-id>
--sysadmin-password <password>
[--install-values <install-values.yaml>]
[--bmc-password <password>]
[--bootstrap-values <bootstrap-values.yaml>]
[--deploy-config <deployment-config.yaml>]
[--release <release>]
Test Plan:
- PASS: Verify the command works with or without --install-values,
--bmc-password, --bootstrap-values, --deploy-config
and --release.
- PASS: Verify that all provided parameters are successfully passed
to the backend.
- PASS: Verify that the CLI asks for the sysadmin-password and
bmc-password if they are not provided in the command
(bmc-password is only prompt if --install-values
is also provided).
- PASS: Verify that the dcmanager help subcloud deploy resume
shows the correct help message containing all options.
Depends-on: https://review.opendev.org/c/starlingx/distcloud/+/889975
Story: 2010756
Task: 48497
Change-Id: I16857f6779205c4dfcc6d255e0aabdd83496f4c7
Signed-off-by: Victor Romano <victor.gluzromano@windriver.com>
This commit adds the subcloud deploy complete command to dcmanager
client. It's used to mark the subcloud deployment as 'complete',
usefull when the user manually configures the subcloud and wants to
finalize the deployment without running 'dcmanager subcloud deploy
config'.
Usage:
dcmanager subcloud deploy complete subcloud-name
To run the 'deploy complete' operation deploy status of the subcloud
must be 'bootstrap-complete'
Test Plan:
1. PASS - Verify that the dcmanager help subcloud deploy complete shows
the correct help message;
2. PASS - Run 'dcmanager subcloud deploy complete' and verify that the
correct API call is made;
3. PASS - Verify that the subcloud name/id parameter is required.
Depends-On: https://review.opendev.org/c/starlingx/distcloud/+/889877
Story: 2010756
Task: 48454
Change-Id: I53929dcad068c93982e3381f47f4dda61b3b5d1e
Signed-off-by: Gustavo Herzmann <gustavo.herzmann@windriver.com>
This commit adds the command "subcloud deploy resume" to
dcmanager client.
Usage:
dcmanager subcloud deploy resume
<subcloud-name-or-id>
--sysadmin-password <password>
[--install-values <install-values.yaml>]
[--bmc-password <password>]
[--bootstrap-address <subcloud-bootstrap-address>]
[--bootstrap-values <bootstrap-values.yaml>]
[--deploy-config <deployment-config.yaml>]
[--release <release>]
Test Plan:
- PASS: Verify the command works with or without --install-values,
--bmc-password, --bootstrap-address, --bootstrap-values,
--deploy-config and --release.
- PASS: Verify that all provided parameters are successfully passed
to the backend.
- PASS: Verify that the CLI asks for the sysadmin-password and
bmc-password if they are not provided in the command
(bmc-password is only prompt if --install-values
is also provided).
- PASS: Verify that the dcmanager help subcloud deploy resume
shows the correct help message containing all options.
Depends-on: https://review.opendev.org/c/starlingx/distcloud/+/886104
Story: 2010756
Task: 48317
Change-Id: I8a984626007b43e685f326dd4dd05294cd50fcce
Signed-off-by: Victor Romano <victor.gluzromano@windriver.com>
Tests still have python2.7 configs remaining and some tests
are named -debian, implying the old ones are for centos and
can be removed.
This commit removes the python2.7 and centos configs from tox
and zuul.
Test Plan:
1. PASS - Ran all tests in tox and verified if every test
finished with the desired output.
2. PASS - Ran tests in zuul environment and checked if
it was successfull.
Story: 2010531
Task: 48385
Change-Id: I2de9ef82a86e2ce35a3f2a5824f5dac634d2bd1e
Signed-off-by: Gustavo Pereira <gustavo.lyrapereira@windriver.com>
Renames the 'dcmanager subcloud-deploy upload/show' commands to
'dcmanager subcloud deploy upload/show'. This is done so that the
command names are consistent with the new 'dcmanager subcloud deploy'
commands (add, install, bootstrap, config, abort and resume).
The original commands will return a deprecation notice, instructing
the user to use the new command names.
Test Plan:
1. PASS - Verify that both renamed commands are working as expected (no
change to the command functionality);
2. PASS - Verify that the old commands are returning the deprecation
notice instructing the user to use the renamed commands;
3. PASS - Verify that the return code when using the deprecated
commands is 1;
4. PASS - Verify that the 'dcmanager help' shows the correct help
message for the renamed commands.
Story: 2010756
Task: 48054
Change-Id: I731b49d74b8d05b411030e3ed83dbc0266df9d9b
Signed-off-by: Gustavo Herzmann <gustavo.herzmann@windriver.com>
This commit adds the command "subcloud deploy abort" to
dcmanager client.
Usage:
dcmanager subcloud deploy abort <subcloud-name-or-id>
Test Plan:
- PASS: Verify the command is succesfully passed to the backend
- PASS: Verify that the dcmanager help subcloud deploy abort
shows the correct help message containing all options.
Story: 2010756
Task: 48103
Depends-on: https://review.opendev.org/c/starlingx/distcloud/+/884710
Signed-off-by: Victor Romano <victor.gluzromano@windriver.com>
Change-Id: I20e4b7be84e1cacae7f66fc8571dab4715966cdc
This commit removes the generic error message from dcmanager-client
to dcmanager-api handle a more detailed message when exceptions occur.
The commands that are affected by this change are:
dcmanager <strategy-type>-strategy create/apply/abort/delete.
Test Plan:
Test Plan:
1. Test the `dcmanager <strategy_type>-strategy create/delete/abort/apply` commands for the following strategies:
- fw-update-strategy, kube-rootca-update-strategy, kube-upgrade-strategy, patch-strategy, prestage-strategy, and upgrade-strategy.
2. Validate that the exception message does not include the old generic reason: "Unable to <command> sw update strategy"
Partial-Bug: 2026604
Change-Id: I60e1188dcbedba7ffb8e8d9e76bb563417b1b69a
Signed-off-by: Hugo Brito <hugo.brito@windriver.com>
This commit adds the command "subcloud deploy install" to
dcmanager client.
Usage:
dcmanager subcloud deploy install
<subcloud-name-or-id>
--sysadmin-password <password>
[--install-values <install-values.yaml>]
[--bmc-password <password>]
[--release <release>]
Test Plan:
- PASS: Verify the command works with or without --install-values,
--bmc-password and --release.
- PASS: Verify that, when provided, the install-values is
successfully passed to backend.
- PASS: Verify that the CLI asks for the sysadmin-password and
bmc-password if they are not provided in the command
(bmc-password is only prompt if --install-values
is also provided).
- PASS: Verify that the dcmanager help subcloud deploy install
shows the correct help message containing all options.
Depends-on: https://review.opendev.org/c/starlingx/distcloud/+/883976
Story: 2010756
Task: 48057
Signed-off-by: Victor Romano <victor.gluzromano@windriver.com>
Change-Id: I962b0d8e8f1a08d9ea9b572954a4750789108325