starlingx
/
tools
Code Issues Proposed changes

Remove CentOS/OpenSUSE build support 

StarlingX stopped supporting CentOS builds in the after release 7.0.
This update will strip CentOS from our code base.  It will also remove
references to the failed OpenSUSE feature as well.

Story: 2011110
Task: 49965
Change-Id: I17943f1b22a57b0ed02f638cb6320855446c0be3
Signed-off-by: Scott Little <scott.little@windriver.com>
This commit is contained in:
Scott Little 2024-05-07 15:22:48 -04:00
parent b325e5810b
commit 8fe8ceb669
131 changed files with 0 additions and 14040 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
.dockerignore
View File

@ -1,5 +1,2 @@
*
!toCOPY
!centos-mirror-tools/yum.repos.d/*
!centos-mirror-tools/rpm-gpg-keys/*
!stx/toCOPY

4
.gitignore vendored
View File

@ -2,10 +2,6 @@
.makeenv
.tox
localrc
toCOPY/.gitconfig
centos-mirror-tools/logs/
centos-mirror-tools/output/
centos-mirror-tools/mirror-check-failures.log
# Sphinx documentation
doc/build/

327
Dockerfile
View File

@ -1,327 +0,0 @@
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Copyright (C) 2019 Intel Corporation
#
FROM centos:7.8.2003
# Proxy configuration
#ENV http_proxy "http://your.actual_http_proxy.com:your_port"
#ENV https_proxy "https://your.actual_https_proxy.com:your_port"
#ENV ftp_proxy "http://your.actual_ftp_proxy.com:your_port"
#ENV no_proxy "localhost,127.0.0.1"
#RUN echo "proxy=$http_proxy" >> /etc/yum.conf && \
# echo -e "export http_proxy=$http_proxy\nexport https_proxy=$https_proxy\n\
#export ftp_proxy=$ftp_proxy\nexport no_proxy=$no_proxy" >> /root/.bashrc
# username you will docker exec into the container as.
# It should NOT be your host username so you can easily tell
# if you are in our out of the container.
ARG MYUNAME=builder
ARG MYUID=1000
# CentOS & EPEL URLs that match the base image
# Override these with --build-arg if you have a mirror
ARG CENTOS_7_8_URL=https://vault.centos.org/centos/7.8.2003
ARG CENTOS_7_9_URL=http://mirror.centos.org/centos-7/7.9.2009
ARG EPEL_7_8_URL=https://archives.fedoraproject.org/pub/archive/epel/7.2020-04-20
ARG MY_EMAIL=
ENV container=docker
# Lock down centos & epel repos
RUN rm -f /etc/yum.repos.d/*
COPY toCOPY/yum.repos.d/*.repo /etc/yum.repos.d/
COPY centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-EPEL-7 /etc/pki/rpm-gpg/
RUN rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY* && \
echo "http_caching=packages" >> /etc/yum.conf && \
echo "skip_missing_names_on_install=0" >>/etc/yum.conf && \
# yum variables must be in lower case ; \
echo "$CENTOS_7_8_URL" >/etc/yum/vars/centos_7_8_url && \
echo "$EPEL_7_8_URL" >/etc/yum/vars/epel_7_8_url && \
echo "$CENTOS_7_9_URL" >/etc/yum/vars/centos_7_9_url && \
# disable fastestmirror plugin because we are not using mirrors ; \
# FIXME: use a mirrorlist URL for centos/vault/epel archives. I couldn't find one.
sed -i 's/enabled=1/enabled=0/' /etc/yum/pluginconf.d/fastestmirror.conf && \
echo "[main]" >> /etc/yum/pluginconf.d/subscription-manager.conf && \
echo "enabled=0" >> /etc/yum/pluginconf.d/subscription-manager.conf && \
yum clean all && \
yum makecache && \
yum install -y deltarpm
# Without this, init won't start the enabled services and exec'ing and starting
# them reports "Failed to get D-Bus connection: Operation not permitted".
VOLUME /run /tmp
# root CA cert expired on October 1st, 2021
RUN yum update -y --enablerepo=centos-7.9-updates ca-certificates
# Download required dependencies by mirror/build processes.
RUN yum install -y \
anaconda \
anaconda-runtime \
autoconf-archive \
autogen \
automake \
bc \
bind \
bind-utils \
bison \
cpanminus \
createrepo \
createrepo_c \
deltarpm \
docker-client \
expat-devel \
flex \
isomd5sum \
gcc \
gettext \
git \
libguestfs-tools \
libtool \
libxml2 \
lighttpd \
lighttpd-fastcgi \
lighttpd-mod_geoip \
net-tools \
mkisofs \
mongodb \
mongodb-server \
pax \
perl-CPAN \
python-deltarpm \
python-pep8 \
python-pip \
python-psutil \
python2-psutil \
python36-psutil \
python3-devel \
python-sphinx \
python-subunit \
python-virtualenv \
python-yaml \
python2-ruamel-yaml \
postgresql \
qemu-kvm \
quilt \
rpm-build \
rpm-sign \
rpm-python \
squashfs-tools \
sudo \
systemd \
syslinux \
udisks2 \
vim-enhanced \
wget
# Finally install a locked down version of mock
RUN groupadd -g 751 cgts && \
echo "mock:x:751:root" >> /etc/group && \
echo "mockbuild:x:9001:" >> /etc/group && \
yum install -y \
https://mirror.starlingx.windriver.com/mirror/centos/epel/dl.fedoraproject.org/pub/epel/7/x86_64/Packages/m/mock-1.4.16-1.el7.noarch.rpm \
https://mirror.starlingx.windriver.com/mirror/centos/epel/dl.fedoraproject.org/pub/epel/7/x86_64/Packages/m/mock-core-configs-31.6-1.el7.noarch.rpm
# mock custumizations
# forcing chroots since a couple of packages naughtily insist on network access and
# we dont have nspawn and networks happy together.
RUN useradd -s /sbin/nologin -u 9001 -g 9001 mockbuild && \
rmdir /var/lib/mock && \
ln -s /localdisk/loadbuild/mock /var/lib/mock && \
rmdir /var/cache/mock && \
ln -s /localdisk/loadbuild/mock-cache /var/cache/mock && \
echo "config_opts['use_nspawn'] = False" >> /etc/mock/site-defaults.cfg && \
echo "config_opts['rpmbuild_networking'] = True" >> /etc/mock/site-defaults.cfg && \
echo >> /etc/mock/site-defaults.cfg
# cpan modules, installing with cpanminus to avoid stupid questions since cpan is whack
RUN cpanm --notest Fatal && \
cpanm --notest XML::SAX && \
cpanm --notest XML::SAX::Expat && \
cpanm --notest XML::Parser && \
cpanm --notest XML::Simple
# Install repo tool
RUN curl https://storage.googleapis.com/git-repo-downloads/repo > /usr/local/bin/repo && \
chmod a+x /usr/local/bin/repo
# installing go and setting paths
ENV GOPATH="/usr/local/go"
ENV PATH="${GOPATH}/bin:${PATH}"
RUN yum install -y golang && \
mkdir -p ${GOPATH}/bin && \
curl https://raw.githubusercontent.com/golang/dep/master/install.sh | sh
# Uprev git, repo
RUN yum install -y dh-autoreconf curl-devel expat-devel gettext-devel openssl-devel perl-devel zlib-devel asciidoc xmlto docbook2X && \
cd /tmp && \
wget https://github.com/git/git/archive/v2.29.2.tar.gz -O git-2.29.2.tar.gz && \
tar xzvf git-2.29.2.tar.gz && \
cd git-2.29.2 && \
make configure && \
./configure --prefix=/usr/local && \
make all doc && \
make install install-doc && \
cd /tmp && \
rm -rf git-2.29.2.tar.gz git-2.29.2
# Systemd Enablement
RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in *; do [ $i == systemd-tmpfiles-setup.service ] || rm -f $i; done); \
rm -f /lib/systemd/system/multi-user.target.wants/*;\
rm -f /etc/systemd/system/*.wants/*;\
rm -f /lib/systemd/system/local-fs.target.wants/*; \
rm -f /lib/systemd/system/sockets.target.wants/*udev*; \
rm -f /lib/systemd/system/sockets.target.wants/*initctl*; \
rm -f /lib/systemd/system/basic.target.wants/*;\
rm -f /lib/systemd/system/anaconda.target.wants/*
# pip installs
COPY toCOPY/builder-constraints.txt /home/$MYUNAME/
# Install required python modules globally; versions are in the constraints file.
# Be careful not to replace modules provided by RPMs as it may break
# other system packages. Look for warnings similar to "Uninstalling a
# distutils installed project has been deprecated" from pip.
RUN pip install -c /home/$MYUNAME/builder-constraints.txt \
testrepository \
fixtures \
pbr \
git-review \
python-subunit \
junitxml \
testtools
# Create a sane py27 virtualenv
COPY toCOPY/builder-opt-py27-constraints.txt /home/$MYUNAME
RUN virtualenv /opt/py27 && \
source /opt/py27/bin/activate && \
pip install -c /home/$MYUNAME/builder-opt-py27-constraints.txt \
tox \
&& \
for prog in tox ; do \
ln -s /opt/py27/bin/$prog /usr/bin ; \
done
# Inherited tools for mock stuff
# we at least need the mock_cache_unlock tool
# they install into /usr/bin
COPY toCOPY/mock_overlay /opt/mock_overlay
RUN cd /opt/mock_overlay && \
make && \
make install
# This image requires a set of scripts and helpers
# for working correctly, in this section they are
# copied inside the image.
COPY toCOPY/finishSetup.sh /usr/local/bin
COPY toCOPY/populate_downloads.sh /usr/local/bin
COPY toCOPY/generate-local-repo.sh /usr/local/bin
COPY toCOPY/generate-centos-repo.sh /usr/local/bin
COPY toCOPY/lst_utils.sh /usr/local/bin
COPY toCOPY/.inputrc /home/$MYUNAME/
# Thes are included for backward compatibility, and
# should be removed after a reasonable time.
COPY toCOPY/generate-cgcs-tis-repo /usr/local/bin
COPY toCOPY/generate-cgcs-centos-repo.sh /usr/local/bin
# ENV setup
RUN echo "# Load stx-builder configuration" >> /etc/profile.d/stx-builder-conf.sh && \
echo "if [[ -r \${HOME}/buildrc ]]; then" >> /etc/profile.d/stx-builder-conf.sh && \
echo " source \${HOME}/buildrc" >> /etc/profile.d/stx-builder-conf.sh && \
echo " export PROJECT SRC_BUILD_ENVIRONMENT MYPROJECTNAME MYUNAME" >> /etc/profile.d/stx-builder-conf.sh && \
echo " export MY_BUILD_CFG MY_BUILD_CFG_RT MY_BUILD_CFG_STD MY_BUILD_DIR MY_BUILD_ENVIRONMENT MY_BUILD_ENVIRONMENT_FILE MY_BUILD_ENVIRONMENT_FILE_RT MY_BUILD_ENVIRONMENT_FILE_STD MY_DEBUG_BUILD_CFG_RT MY_DEBUG_BUILD_CFG_STD MY_LOCAL_DISK MY_MOCK_ROOT MY_REPO MY_REPO_ROOT_DIR MY_SRC_RPM_BUILD_DIR MY_RELEASE MY_WORKSPACE LAYER" >> /etc/profile.d/stx-builder-conf.sh && \
echo "fi" >> /etc/profile.d/stx-builder-conf.sh && \
echo "export FORMAL_BUILD=0" >> /etc/profile.d/stx-builder-conf.sh && \
echo "export PATH=\$MY_REPO/build-tools:\$PATH" >> /etc/profile.d/stx-builder-conf.sh
# centos locales are broken. this needs to be run after the last yum install/update
RUN localedef -i en_US -f UTF-8 en_US.UTF-8
# setup
RUN mkdir -p /www/run && \
mkdir -p /www/logs && \
mkdir -p /www/home && \
mkdir -p /www/root/htdocs/localdisk && \
chown -R $MYUID:cgts /www && \
ln -s /localdisk/loadbuild /www/root/htdocs/localdisk/loadbuild && \
ln -s /import/mirrors/CentOS /www/root/htdocs/CentOS && \
ln -s /import/mirrors/fedora /www/root/htdocs/fedora && \
ln -s /localdisk/designer /www/root/htdocs/localdisk/designer
# lighthttpd setup
# chmod for /var/log/lighttpd fixes a centos issue
# in place sed for server root since it's expanded soon thereafter
# echo "server.bind = \"localhost\"" >> /etc/lighttpd/lighttpd.conf && \
RUN echo "$MYUNAME ALL=(ALL:ALL) NOPASSWD:ALL" >> /etc/sudoers && \
mkdir -p /var/log/lighttpd && \
chmod a+rwx /var/log/lighttpd/ && \
sed -i 's%^var\.log_root.*$%var.log_root = "/www/logs"%g' /etc/lighttpd/lighttpd.conf && \
sed -i 's%^var\.server_root.*$%var.server_root = "/www/root"%g' /etc/lighttpd/lighttpd.conf && \
sed -i 's%^var\.home_dir.*$%var.home_dir = "/www/home"%g' /etc/lighttpd/lighttpd.conf && \
sed -i 's%^var\.state_dir.*$%var.state_dir = "/www/run"%g' /etc/lighttpd/lighttpd.conf && \
sed -i "s/server.port/#server.port/g" /etc/lighttpd/lighttpd.conf && \
sed -i "s/server.use-ipv6/#server.use-ipv6/g" /etc/lighttpd/lighttpd.conf && \
sed -i "s/server.username/#server.username/g" /etc/lighttpd/lighttpd.conf && \
sed -i "s/server.groupname/#server.groupname/g" /etc/lighttpd/lighttpd.conf && \
sed -i "s/server.bind/#server.bind/g" /etc/lighttpd/lighttpd.conf && \
sed -i "s/server.document-root/#server.document-root/g" /etc/lighttpd/lighttpd.conf && \
sed -i "s/server.dirlisting/#server.dirlisting/g" /etc/lighttpd/lighttpd.conf && \
echo "server.port = 8088" >> /etc/lighttpd/lighttpd.conf && \
echo "server.use-ipv6 = \"disable\"" >> /etc/lighttpd/lighttpd.conf && \
echo "server.username = \"$MYUNAME\"" >> /etc/lighttpd/lighttpd.conf && \
echo "server.groupname = \"cgts\"" >> /etc/lighttpd/lighttpd.conf && \
echo "server.bind = \"localhost\"" >> /etc/lighttpd/lighttpd.conf && \
echo "server.document-root = \"/www/root/htdocs\"" >> /etc/lighttpd/lighttpd.conf && \
sed -i "s/dir-listing.activate/#dir-listing.activate/g" /etc/lighttpd/conf.d/dirlisting.conf && \
echo "dir-listing.activate = \"enable\"" >> /etc/lighttpd/conf.d/dirlisting.conf
RUN useradd -r -u $MYUID -g cgts -m $MYUNAME && \
ln -s /home/$MYUNAME/.ssh /mySSH && \
rsync -av /etc/skel/ /home/$MYUNAME/
# now that we are doing systemd, make the startup script be in bashrc
# also we need to SHADOW the udev centric mkefiboot script with a sudo centric one
RUN echo "bash -C /usr/local/bin/finishSetup.sh" >> /home/$MYUNAME/.bashrc && \
echo "export PATH=/usr/local/bin:/localdisk/designer/$MYUNAME/bin:\$PATH" >> /home/$MYUNAME/.bashrc && \
chmod a+x /usr/local/bin/*
# Genrate a git configuration file in order to save an extra step
# for end users, this file is required by "repo" tool.
RUN chown $MYUNAME /home/$MYUNAME && \
if [ -z $MY_EMAIL ]; then MY_EMAIL=$MYUNAME@opendev.org; fi && \
runuser -u $MYUNAME -- git config --global user.email $MY_EMAIL && \
runuser -u $MYUNAME -- git config --global user.name $MYUNAME && \
runuser -u $MYUNAME -- git config --global color.ui false
# Customizations for mirror creation
RUN rm /etc/yum.repos.d/*
COPY centos-mirror-tools/yum.repos.d/* /etc/yum.repos.d/
COPY centos-mirror-tools/rpm-gpg-keys/* /etc/pki/rpm-gpg/
# Import GPG keys
RUN rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY*
# Try to continue a yum command even if a StarlingX repo is unavailable.
RUN yum-config-manager --setopt=StarlingX\*.skip_if_unavailable=1 --save
# When we run 'init' below, it will run systemd, and systemd requires RTMIN+3
# to exit cleanly. By default, docker stop uses SIGTERM, which systemd ignores.
STOPSIGNAL RTMIN+3
# Don't know if it's possible to run services without starting this
CMD /usr/sbin/init

86
buildrc
View File

@ -1,86 +0,0 @@
# Common configuration for StarlingX builder
[[ -z "$_BUILDRC" ]] || return 0
declare -r -g _BUILDRC=1
# Find the other rc files
BUILDRC_DIR=$(cd $(dirname "${BASH_SOURCE:-$0}") && pwd)
# Allow local overrides of env variables
if [[ -f $BUILDRC_DIR/localrc ]]; then
source $BUILDRC_DIR/localrc
fi
# Source repo base - Intel GitHub
SOURCE_HOST=${SOURCE_HOST:-git.openstack.org}
SOURCE_PORT=${SOURCE_PORT:-}
SOURCE_PROJECT=${SOURCE_PROJECT:-openstack}
SOURCE_REMOTE_URI=${SOURCE_REMOTE_URI:-git@${SOURCE_HOST}:${SOURCE_PROJECT}}
# Host-side prefix
if [[ -n $container && "$container" == "docker" ]]; then
# We are running inside a docker container, do not give HOST_PATH a value
HOST_PREFIX=
else
# Host-side path for user-local /localdisk assumes that all user workspaces are
# in the same directory structure. Override this in localrc if that is
# not the case.
HOST_PREFIX=${HOST_PREFIX:-${HOME}/starlingx}
fi
# Basic build environment configuration
# Real (outside the container) username
export USER=${USER:-$(id -un)}
# Local mirror location
HOST_MIRROR_DIR=${HOST_MIRROR_DIR:-${HOME}/starlingx/mirror}
# The root of an individual build workspace
# GUEST_LOCALDISK is used for the docker run command mapping; don't change this
# until the WRS tooling is gone, it is hard-coded in many places
# We remove a leading '/' as having more than one breaks certain bits of the build
GUEST_LOCALDISK=${LOCALDISK:-localdisk}
GUEST_LOCALDISK=${GUEST_LOCALDISK%/}
# In the docker run command this will be correct for the host side of the mapping
LOCALDISK=${HOST_PREFIX}/${GUEST_LOCALDISK}
# Release Variable
export MY_RELEASE=${MY_RELEASE:-4.0}
# Default branch to build
export BRANCH=${BRANCH:-intel_r0}
# avoid calling your project 'build' it will break some SRPMs
export PROJECT=${PROJECT:-test}
# These are used in the Dockerfile, not sure where else
export MYUNAME=${MYUNAME:-builder}
export MYPROJECTNAME=${PROJECT:-frog1}
export SRC_BUILD_ENVIRONMENT=${SRC_BUILD_ENVIRONMENT:-$MY_RELEASE}
# All of the below are dependent on variables defined earlier, right now
# we are not going to support directly setting them in localrc
export MY_BUILD_ENVIRONMENT=$MYUNAME-$PROJECT-$SRC_BUILD_ENVIRONMENT
export MY_BUILD_ENVIRONMENT_FILE=${MY_BUILD_ENVIRONMENT}.cfg
export MY_BUILD_ENVIRONMENT_FILE_STD=${MY_BUILD_ENVIRONMENT}-std.cfg
export MY_BUILD_ENVIRONMENT_FILE_RT=${MY_BUILD_ENVIRONMENT}-rt.cfg
export MY_BUILD_DIR=${LOCALDISK}/loadbuild/$MYUNAME/$PROJECT
export MY_WORKSPACE=$MY_BUILD_DIR
export MY_LOCAL_DISK=${LOCALDISK}/designer/$MYUNAME
export MY_REPO_ROOT_DIR=$MY_LOCAL_DISK/$PROJECT
export MY_REPO=$MY_REPO_ROOT_DIR/cgcs-root
export MY_SRC_RPM_BUILD_DIR=$MY_BUILD_DIR/rpmbuild
export MY_BUILD_CFG=$MY_WORKSPACE/$MY_BUILD_ENVIRONMENT_FILE
export MY_BUILD_CFG_STD=$MY_WORKSPACE/std/${MY_BUILD_ENVIRONMENT_FILE_STD}
export MY_BUILD_CFG_RT=${MY_WORKSPACE}/rt/${MY_BUILD_ENVIRONMENT_FILE_RT}
export MY_MOCK_ROOT=$MY_WORKSPACE/mock/root
export MY_DEBUG_BUILD_CFG_STD=${MY_WORKSPACE}/std/configs/${MY_BUILD_ENVIRONMENT}-std/${MY_BUILD_ENVIRONMENT}-std.b0.cfg
export MY_DEBUG_BUILD_CFG_RT=${MY_WORKSPACE}/std/configs/${MY_BUILD_ENVIRONMENT}-std/${MY_BUILD_ENVIRONMENT}-rt.b0.cfg
export LAYER=$LAYER
export STX_CONFIG_DIR="$STX_CONFIG_DIR"

4
centos-mirror-tools/config/centos/compiler/rpms_3rdparties.lst
View File

@ -1,4 +0,0 @@
# glib2-2.56.1-7.el7.x86_64.rpm provided by mock
kernel-headers-4.18.0-147.3.1.el8_1.x86_64.rpm#http://mirror.centos.org/centos/8.1.1911/BaseOS/x86_64/os/Packages/kernel-headers-4.18.0-147.3.1.el8_1.x86_64.rpm
libpng-1.5.13-8.el7.x86_64.rpm#http://mirror.centos.org/centos/7/os/x86_64/Packages/libpng-1.5.13-8.el7.x86_64.rpm
libpng-devel-1.5.13-8.el7.x86_64.rpm#http://mirror.centos.org/centos/7/os/x86_64/Packages/libpng-devel-1.5.13-8.el7.x86_64.rpm

291
centos-mirror-tools/config/centos/compiler/rpms_centos.lst
View File

@ -1,291 +0,0 @@
apr-1.4.8-3.el7_4.1.x86_64.rpm
apr-util-1.5.2-6.el7.x86_64.rpm
atk-devel-2.28.1-1.el7.x86_64.rpm
at-spi2-atk-devel-2.26.2-1.el7.x86_64.rpm
autoconf-2.69-11.el7.noarch.rpm
automake-1.13.4-3.el7.noarch.rpm
# basesystem-10.0-7.el7.centos.noarch.rpm provided by mock
bash-4.2.46-34.el7.x86_64.rpm
# binutils-2.27-34.base.el7.x86_64.rpm provided by mock
binutils-devel-2.27-41.base.el7.x86_64.rpm
bison-3.0.4-2.el7.x86_64.rpm
bluez-libs-5.44-4.el7_4.x86_64.rpm
bluez-libs-devel-5.44-4.el7_4.x86_64.rpm
# bzip2-1.0.6-13.el7.x86_64.rpm provided by mock
bzip2-devel-1.0.6-13.el7.x86_64.rpm
# bzip2-libs-1.0.6-13.el7.x86_64.rpm provided by mock
# ca-certificates-2018.2.22-70.0.el7_5.noarch.rpm provided by mock
# centos-release-7-6.1810.2.el7.centos.x86_64.rpm provided by mock
check-0.9.9-5.el7.x86_64.rpm
check-devel-0.9.9-5.el7.x86_64.rpm
# chkconfig-1.7.4-1.el7.x86_64.rpm provided by mock
cmake-2.8.12.2-2.el7.x86_64.rpm
# coreutils-8.22-23.el7.x86_64.rpm provided by mock
# cpio-2.11-27.el7.x86_64.rpm provided by mock
# cpp-4.8.5-36.el7.x86_64.rpm provided by mock
# cracklib-2.9.0-11.el7.x86_64.rpm provided by mock
# cracklib-dicts-2.9.0-11.el7.x86_64.rpm provided by mock
# cryptsetup-libs-2.0.3-3.el7.x86_64.rpm provided by mock
# cyrus-sasl-lib-2.1.26-23.el7.x86_64.rpm provided by mock
# dbus-1.10.24-15.el7.x86_64.rpm provided by mock
dbus-devel-1.10.24-15.el7.x86_64.rpm
# dbus-libs-1.10.24-15.el7.x86_64.rpm provided by mock
dejavu-fonts-common-2.33-6.el7.noarch.rpm
dejavu-sans-fonts-2.33-6.el7.noarch.rpm
# device-mapper-1.02.146-4.el7.x86_64.rpm provided by mock
device-mapper-devel-1.02.146-4.el7.x86_64.rpm
device-mapper-event-1.02.146-4.el7.x86_64.rpm
device-mapper-event-libs-1.02.146-4.el7.x86_64.rpm
# device-mapper-libs-1.02.146-4.el7.x86_64.rpm provided by mock
device-mapper-multipath-0.4.9-119.el7.x86_64.rpm
device-mapper-multipath-libs-0.4.9-119.el7.x86_64.rpm
device-mapper-persistent-data-0.7.3-3.el7.x86_64.rpm
# diffutils-3.3-4.el7.x86_64.rpm provided by mock
# dracut-033-554.el7.x86_64.rpm provided by mock
# expat-2.1.0-14.el7_9.x86_64.rpm provided by mock
# expat-devel-2.1.0-14.el7_9.x86_64.rpm built from source
file-devel-5.11-37.el7.x86_64.rpm
# filesystem-3.2-25.el7.x86_64.rpm provided by mock
# findutils-4.5.11-6.el7.x86_64.rpm provided by mock
fipscheck-1.4.1-6.el7.x86_64.rpm
fipscheck-lib-1.4.1-6.el7.x86_64.rpm
fontconfig-2.13.0-4.3.el7.x86_64.rpm
fontconfig-devel-2.13.0-4.3.el7.x86_64.rpm
fontpackages-filesystem-1.44-8.el7.noarch.rpm
freetype-2.8-12.el7.x86_64.rpm
freetype-devel-2.8-12.el7.x86_64.rpm
# gawk-4.0.2-4.el7_3.1.x86_64.rpm provided by mock
# gcc-4.8.5-36.el7.x86_64.rpm provided by mock
# gcc-c++-4.8.5-36.el7.x86_64.rpm provided by mock
# gdbm-1.10-8.el7.x86_64.rpm provided by mock
gdbm-devel-1.10-8.el7.x86_64.rpm
gettext-0.19.8.1-3.el7.x86_64.rpm
gettext-common-devel-0.19.8.1-3.el7.noarch.rpm
gettext-devel-0.19.8.1-3.el7.x86_64.rpm
gettext-libs-0.19.8.1-3.el7.x86_64.rpm
git-1.8.3.1-20.el7.x86_64.rpm
# glibc-2.17-323.el7_9.x86_64.rpm provided by mock
# glibc-common-2.17-323.el7_9.x86_64.rpm provided by mock
# glibc-devel-2.17-323.el7_9.x86_64.rpm provided by mock
# glibc-headers-2.17-323.el7_9.x86_64.rpm provided by mock
glibc-static-2.17-323.el7_9.x86_64.rpm
gl-manpages-1.1-7.20130122.el7.noarch.rpm
# gmp-6.0.0-15.el7.x86_64.rpm provided by mock
gmp-devel-6.0.0-15.el7.x86_64.rpm
gnutls-3.3.29-8.el7.x86_64.rpm
golang-1.11.2-3.el7.x86_64.rpm
golang-bin-1.11.2-3.el7.x86_64.rpm
golang-github-cpuguy83-go-md2man-1.0.4-4.el7.x86_64.rpm
golang-src-1.11.2-3.el7.noarch.rpm
# grep-2.20-3.el7.x86_64.rpm provided by mock
# groff-base-1.22.2-8.el7.x86_64.rpm provided by mock
# gzip-1.5-10.el7.x86_64.rpm provided by mock
# hardlink-1.0-19.el7.x86_64.rpm provided by mock
hwdata-0.252-9.1.el7.x86_64.rpm
# info-5.1-5.el7.x86_64.rpm provided by mock
# json-c-0.11-4.el7_0.x86_64.rpm provided by mock
json-c-devel-0.11-4.el7_0.x86_64.rpm
# keyutils-libs-1.5.8-3.el7.x86_64.rpm provided by mock
keyutils-libs-devel-1.5.8-3.el7.x86_64.rpm
# kmod-20-23.el7.x86_64.rpm provided by mock
# kmod-libs-20-23.el7.x86_64.rpm provided by mock
# kpartx-0.4.9-119.el7.x86_64.rpm provided by mock
krb5-devel-1.15.1-34.el7.x86_64.rpm
# krb5-libs-1.15.1-34.el7.x86_64.rpm provided by mock
less-458-9.el7.x86_64.rpm
# libacl-2.2.51-14.el7.x86_64.rpm provided by mock
libacl-devel-2.2.51-14.el7.x86_64.rpm
libarchive-devel-3.1.2-10.el7_2.x86_64.rpm
# libattr-2.4.46-13.el7.x86_64.rpm provided by mock
libattr-devel-2.4.46-13.el7.x86_64.rpm
# libcap-2.22-9.el7.x86_64.rpm provided by mock
libcap-devel-2.22-9.el7.x86_64.rpm
# libcap-ng-0.7.5-4.el7.x86_64.rpm provided by mock
libcap-ng-devel-0.7.5-4.el7.x86_64.rpm
libcroco-0.6.12-4.el7.x86_64.rpm
# libdb-5.3.21-24.el7.x86_64.rpm provided by mock
libdb-devel-5.3.21-24.el7.x86_64.rpm
# libdb-utils-5.3.21-24.el7.x86_64.rpm provided by mock
libedit-3.0-12.20121213cvs.el7.x86_64.rpm
# libffi-3.0.13-18.el7.x86_64.rpm provided by mock
libffi-devel-3.0.13-18.el7.x86_64.rpm
# libgcc-4.8.5-36.el7.x86_64.rpm provided by mock
# libgcrypt-1.5.3-14.el7.x86_64.rpm provided by mock
libglvnd-1.0.1-0.8.git5baa1e5.el7.x86_64.rpm
libglvnd-core-devel-1.0.1-0.8.git5baa1e5.el7.x86_64.rpm
libglvnd-devel-1.0.1-0.8.git5baa1e5.el7.x86_64.rpm
libglvnd-egl-1.0.1-0.8.git5baa1e5.el7.x86_64.rpm
libglvnd-gles-1.0.1-0.8.git5baa1e5.el7.x86_64.rpm
libglvnd-glx-1.0.1-0.8.git5baa1e5.el7.x86_64.rpm
libglvnd-opengl-1.0.1-0.8.git5baa1e5.el7.x86_64.rpm
# libgomp-4.8.5-36.el7.x86_64.rpm provided by mock
# libgpg-error-1.12-3.el7.x86_64.rpm provided by mock
libgpg-error-devel-1.12-3.el7.x86_64.rpm
# libidn-1.28-4.el7.x86_64.rpm provided by mock
libkadm5-1.15.1-34.el7.x86_64.rpm
libmodman-2.0.1-8.el7.x86_64.rpm
# libmount-2.23.2-59.el7.x86_64.rpm provided by mock
# libmpc-1.0.1-3.el7.x86_64.rpm provided by mock
libpciaccess-0.14-1.el7.x86_64.rpm
libproxy-0.4.11-11.el7.x86_64.rpm
# libpwquality-1.2.3-5.el7.x86_64.rpm provided by mock
# libselinux-2.5-14.1.el7.x86_64.rpm provided by mock
libselinux-devel-2.5-14.1.el7.x86_64.rpm
# libsepol-2.5-10.el7.x86_64.rpm provided by mock
libsepol-devel-2.5-10.el7.x86_64.rpm
# libsmartcols-2.23.2-59.el7.x86_64.rpm provided by mock
# libstdc++-4.8.5-36.el7.x86_64.rpm provided by mock
# libstdc++-devel-4.8.5-36.el7.x86_64.rpm provided by mock
# libtasn1-4.10-1.el7.x86_64.rpm provided by mock
libtirpc-0.2.4-0.15.el7.x86_64.rpm
libtool-2.4.2-22.el7_3.x86_64.rpm
libunistring-0.9.3-9.el7.x86_64.rpm
# libuser-0.60-9.el7.x86_64.rpm provided by mock
# libutempter-1.1.6-4.el7.x86_64.rpm provided by mock
# libuuid-2.23.2-59.el7.x86_64.rpm provided by mock
libuuid-devel-2.23.2-59.el7.x86_64.rpm
# libverto-0.2.5-4.el7.x86_64.rpm provided by mock
libverto-devel-0.2.5-4.el7.x86_64.rpm
libwayland-client-1.15.0-1.el7.x86_64.rpm
libwayland-server-1.15.0-1.el7.x86_64.rpm
libX11-1.6.7-4.el7_9.x86_64.rpm
libX11-common-1.6.7-4.el7_9.noarch.rpm
libX11-devel-1.6.7-4.el7_9.x86_64.rpm
libXau-1.0.8-2.1.el7.x86_64.rpm
libXau-devel-1.0.8-2.1.el7.x86_64.rpm
libxcb-1.13-1.el7.x86_64.rpm
libxcb-devel-1.13-1.el7.x86_64.rpm
libXdamage-1.1.4-4.1.el7.x86_64.rpm
libXdamage-devel-1.1.4-4.1.el7.x86_64.rpm
libXext-1.3.3-3.el7.x86_64.rpm
libXext-devel-1.3.3-3.el7.x86_64.rpm
libXfixes-5.0.3-1.el7.x86_64.rpm
libXfixes-devel-5.0.3-1.el7.x86_64.rpm
libXft-2.3.2-2.el7.x86_64.rpm
libXft-devel-2.3.2-2.el7.x86_64.rpm
# libxml2-2.9.1-6.el7_9.6.x86_64.rpm provided by mock
libXrender-0.9.10-1.el7.x86_64.rpm
libXrender-devel-0.9.10-1.el7.x86_64.rpm
libxshmfence-1.2-1.el7.x86_64.rpm
libXxf86vm-1.1.4-1.el7.x86_64.rpm
libXxf86vm-devel-1.1.4-1.el7.x86_64.rpm
# lua-5.1.4-15.el7.x86_64.rpm provided by mock
lua-devel-5.1.4-15.el7.x86_64.rpm
# lz4-1.7.5-2.el7.x86_64.rpm provided by mock
m4-1.4.16-10.el7.x86_64.rpm
mercurial-2.6.2-8.el7_4.x86_64.rpm
mesa-libGLU-9.0.0-4.el7.x86_64.rpm
mesa-libGLU-devel-9.0.0-4.el7.x86_64.rpm
# mpfr-3.1.1-4.el7.x86_64.rpm provided by mock
# ncurses-5.9-14.20130511.el7_4.x86_64.rpm provided by mock
# ncurses-base-5.9-14.20130511.el7_4.noarch.rpm provided by mock
ncurses-devel-5.9-14.20130511.el7_4.x86_64.rpm
# ncurses-libs-5.9-14.20130511.el7_4.x86_64.rpm provided by mock
neon-0.30.0-3.el7.x86_64.rpm
nettle-2.7.1-8.el7.x86_64.rpm
# nspr-4.32.0-1.el7_9.x86_64.rpm provided by mock
nspr-devel-4.32.0-1.el7_9.x86_64.rpm
# nss-3.67.0-4.el7_9.x86_64.rpm provided by mock
nss-devel-3.67.0-4.el7_9.x86_64.rpm
# nss-pem-1.0.3-5.el7.x86_64.rpm provided by mock
# nss-sysinit-3.67.0-4.el7_9.x86_64.rpm provided by mock
# nss-tools-3.67.0-4.el7_9.x86_64.rpm provided by mock
# nss-util-3.67.0-1.el7_9.x86_64.rpm provided by mock
nss-util-devel-3.67.0-1.el7_9.x86_64.rpm
openssh-7.4p1-21.el7.x86_64.rpm
openssh-clients-7.4p1-21.el7.x86_64.rpm
openssl-devel-1.0.2k-16.el7.x86_64.rpm
# openssl-libs-1.0.2k-16.el7.x86_64.rpm provided by mock
# p11-kit-0.23.5-3.el7.x86_64.rpm provided by mock
p11-kit-devel-0.23.5-3.el7.x86_64.rpm
# p11-kit-trust-0.23.5-3.el7.x86_64.rpm provided by mock
pakchois-0.4-10.el7.x86_64.rpm
# pam-1.1.8-22.el7.x86_64.rpm provided by mock
# pcre-8.32-17.el7.x86_64.rpm provided by mock
pcre-devel-8.32-17.el7.x86_64.rpm
# perl-5.16.3-299.el7_9.x86_64.rpm provided by mock
# perl-Carp-1.26-244.el7.noarch.rpm provided by mock
# perl-constant-1.27-2.el7.noarch.rpm provided by mock
perl-Data-Dumper-2.145-3.el7.x86_64.rpm
# perl-Encode-2.51-7.el7.x86_64.rpm provided by mock
perl-Encode-Locale-1.03-5.el7.noarch.rpm
perl-Error-0.17020-2.el7.noarch.rpm
# perl-Exporter-5.68-3.el7.noarch.rpm provided by mock
# perl-File-Path-2.09-2.el7.noarch.rpm provided by mock
# perl-File-Temp-0.23.01-3.el7.noarch.rpm provided by mock
# perl-Filter-1.49-3.el7.x86_64.rpm provided by mock
# perl-Getopt-Long-2.40-3.el7.noarch.rpm provided by mock
perl-Git-1.8.3.1-20.el7.noarch.rpm
# perl-HTTP-Tiny-0.033-3.el7.noarch.rpm provided by mock
perl-libintl-1.20-12.el7.x86_64.rpm
# perl-libs-5.16.3-299.el7_9.x86_64.rpm provided by mock
# perl-macros-5.16.3-299.el7_9.x86_64.rpm provided by mock
# perl-parent-0.225-244.el7.noarch.rpm provided by mock
# perl-PathTools-3.40-5.el7.x86_64.rpm provided by mock
# perl-Pod-Escapes-1.04-299.el7_9.noarch.rpm provided by mock
# perl-podlators-2.5.1-3.el7.noarch.rpm provided by mock
# perl-Pod-Perldoc-3.20-4.el7.noarch.rpm provided by mock
# perl-Pod-Simple-3.28-4.el7.noarch.rpm provided by mock
# perl-Pod-Usage-1.63-3.el7.noarch.rpm provided by mock
# perl-Scalar-List-Utils-1.27-248.el7.x86_64.rpm provided by mock
# perl-Socket-2.010-4.el7.x86_64.rpm provided by mock
# perl-Storable-2.45-3.el7.x86_64.rpm provided by mock
perl-TermReadKey-2.30-20.el7.x86_64.rpm
perl-Test-Harness-3.28-3.el7.noarch.rpm
# perl-Text-ParseWords-3.29-4.el7.noarch.rpm provided by mock
perl-Text-Unidecode-0.04-20.el7.noarch.rpm
# perl-threads-1.87-4.el7.x86_64.rpm provided by mock
# perl-threads-shared-1.43-6.el7.x86_64.rpm provided by mock
# perl-Time-HiRes-1.9725-3.el7.x86_64.rpm provided by mock
# perl-Time-Local-1.2300-2.el7.noarch.rpm provided by mock
# pkgconfig-0.27.1-4.el7.x86_64.rpm provided by mock
# popt-1.13-16.el7.x86_64.rpm provided by mock
popt-devel-1.13-16.el7.x86_64.rpm
# procps-ng-3.3.10-28.el7.x86_64.rpm provided by mock
pyparsing-2.1.10-3.el7.noarch.rpm
python2-pyparsing-2.1.10-3.el7.noarch.rpm
python3-3.6.8-10.el7.x86_64.rpm
python3-devel-3.6.8-10.el7.x86_64.rpm
python3-libs-3.6.8-10.el7.x86_64.rpm
python3-pip-9.0.3-5.el7.noarch.rpm
python3-rpm-generators-6-2.el7.noarch.rpm
python3-rpm-macros-3-32.el7.noarch.rpm
python3-setuptools-39.2.0-10.el7.noarch.rpm
python-2.7.5-89.el7.x86_64.rpm
python-devel-2.7.5-89.el7.x86_64.rpm
python-libs-2.7.5-89.el7.x86_64.rpm
# qrencode-libs-3.4.1-3.el7.x86_64.rpm provided by mock
# readline-6.2-10.el7.x86_64.rpm provided by mock
readline-devel-6.2-10.el7.x86_64.rpm
rpm-4.11.3-35.el7.x86_64.rpm
rpm-build-4.11.3-35.el7.x86_64.rpm
rpm-build-libs-4.11.3-35.el7.x86_64.rpm
rpm-libs-4.11.3-35.el7.x86_64.rpm
rpm-python-4.11.3-35.el7.x86_64.rpm
rsync-3.1.2-4.el7.x86_64.rpm
# sed-4.2.2-5.el7.x86_64.rpm provided by mock
# setup-2.8.71-10.el7.noarch.rpm provided by mock
# shadow-utils-4.1.5.1-25.el7.x86_64.rpm provided by mock
# shared-mime-info-1.8-4.el7.x86_64.rpm provided by mock
# sqlite-3.7.17-8.el7_7.1.x86_64.rpm provided by mock
sqlite-devel-3.7.17-8.el7_7.1.x86_64.rpm
subversion-1.7.14-14.el7.x86_64.rpm
subversion-libs-1.7.14-14.el7.x86_64.rpm
# tar-1.26-35.el7.x86_64.rpm provided by mock
tcl-8.5.13-8.el7.x86_64.rpm
tcl-devel-8.5.13-8.el7.x86_64.rpm
texinfo-5.1-5.el7.x86_64.rpm
tix-8.4.3-12.el7.x86_64.rpm
tix-devel-8.4.3-12.el7.x86_64.rpm
tk-8.5.13-6.el7.x86_64.rpm
tk-devel-8.5.13-6.el7.x86_64.rpm
trousers-0.3.14-2.el7.x86_64.rpm
# tzdata-2018g-1.el7.noarch.rpm provided by mock
# ustr-1.0.4-16.el7.x86_64.rpm provided by mock
ustr-devel-1.0.4-16.el7.x86_64.rpm
xorg-x11-proto-devel-2018.4-1.el7.noarch.rpm
# xz-5.2.2-1.el7.x86_64.rpm provided by mock
xz-devel-5.2.2-1.el7.x86_64.rpm
# xz-libs-5.2.2-1.el7.x86_64.rpm provided by mock
# zlib-1.2.7-18.el7.x86_64.rpm provided by mock
zlib-devel-1.2.7-18.el7.x86_64.rpm

37
centos-mirror-tools/config/centos/compiler/rpms_centos3rdparties.lst
View File

@ -1,37 +0,0 @@
# audit-libs-2.8.4-4.el7.x86_64.rpm provided by mock
audit-libs-devel-2.8.4-4.el7.x86_64.rpm
audit-libs-python-2.8.4-4.el7.x86_64.rpm
devtoolset-7-gcc-c++-7.3.1-5.10.el7.x86_64.rpm
devtoolset-7-libstdc++-devel-7.3.1-5.10.el7.x86_64.rpm
# elfutils-default-yama-scope-0.176-2.el7.noarch.rpm provided by mock
# elfutils-devel-0.176-2.el7.x86_64.rpm provided by mock
# elfutils-libelf-0.176-2.el7.x86_64.rpm provided by mock
# elfutils-libelf-devel-0.176-2.el7.x86_64.rpm provided by mock
# elfutils-libs-0.176-2.el7.x86_64.rpm provided by mock
ima-evm-utils-devel-1.1-2.el7.x86_64.rpm
# libblkid-2.23.2-59.el7.x86_64.rpm provided by mock
# libcom_err-1.42.9-13.el7.x86_64.rpm provided by mock
libcom_err-devel-1.42.9-13.el7.x86_64.rpm
libdrm-2.4.91-3.el7.x86_64.rpm
libdrm-devel-2.4.91-3.el7.x86_64.rpm
# libsemanage-2.5-14.el7.x86_64.rpm provided by mock
libsemanage-devel-2.5-14.el7.x86_64.rpm
mesa-libEGL-18.0.5-3.el7.x86_64.rpm
mesa-libEGL-devel-18.0.5-3.el7.x86_64.rpm
mesa-libgbm-18.0.5-3.el7.x86_64.rpm
mesa-libGL-18.0.5-3.el7.x86_64.rpm
mesa-libglapi-18.0.5-3.el7.x86_64.rpm
mesa-libGL-devel-18.0.5-3.el7.x86_64.rpm
# nss-softokn-3.67.0-3.el7_9.x86_64.rpm provided by mock
nss-softokn-devel-3.67.0-3.el7_9.x86_64.rpm
# nss-softokn-freebl-3.67.0-3.el7_9.x86_64.rpm provided by mock
nss-softokn-freebl-devel-3.67.0-3.el7_9.x86_64.rpm
# openldap-2.4.44-20.el7.x86_64.rpm provided by mock
# systemd-219-78.el7_9.3.x86_64.rpm provided by mock
# systemd-devel-219-78.el7_9.3.x86_64.rpm provided by mock
# systemd-libs-219-78.el7_9.3.x86_64.rpm provided by mock
# systemd-sysv-219-78.el7_9.3.x86_64.rpm provided by mock
systemtap-sdt-devel-3.3-3.el7.x86_64.rpm
# util-linux-2.23.2-59.el7.x86_64.rpm provided by mock
valgrind-3.13.0-13.el7.x86_64.rpm
valgrind-devel-3.13.0-13.el7.x86_64.rpm

5
centos-mirror-tools/config/centos/containers/required_layer_pkgs.cfg
View File

@ -1,5 +0,0 @@
compiler,std,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/compiler/latest_build/outputs/RPMS/std/rpm.lst
distro,std,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/RPMS/std/rpm.lst
distro,rt,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/RPMS/rt/rpm.lst
distro,installer,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/RPMS/installer/rpm.lst
flock,std,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/flock/latest_build/outputs/RPMS/std/rpm.lst

4
centos-mirror-tools/config/centos/containers/required_layer_wheel_inc.cfg
View File

@ -1,4 +0,0 @@
distro,stable,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/centos_stable_wheels.inc
distro,dev,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/centos_dev_wheels.inc
flock,stable,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/flock/latest_build/outputs/centos_stable_wheels.inc
flock,dev,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/flock/latest_build/outputs/centos_dev_wheels.inc

12
centos-mirror-tools/config/centos/containers/yum.repos.d/StarlingX_mirror_compiler_layer.repo
View File

@ -1,12 +0,0 @@
#####
# StarlingX compiler layer at the StarlingX Mirror
[Starlingx-mirror_compiler_std_layer]
name=Starlingx-mirror_compiler_std_layer
baseurl=https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/compiler/latest_build/outputs/RPMS/std/
enabled=1
[Starlingx-mirror_compiler_installer_layer]
name=Starlingx-mirror_compiler_installer_layer
baseurl=https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/compiler/latest_build/outputs/RPMS/installer/
enabled=1

18
centos-mirror-tools/config/centos/containers/yum.repos.d/StarlingX_mirror_distro_layer.repo
View File

@ -1,18 +0,0 @@
#####
# StarlingX distro layer at the StarlingX Mirror
[Starlingx-mirror_distro_std_layer]
name=Starlingx-mirror_distro_std_layer
baseurl=https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/RPMS/std/
enabled=1
[Starlingx-mirror_distro_rt_layer]
name=Starlingx-mirror_distro_rt_layer
baseurl=https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/RPMS/rt/
enabled=1
[Starlingx-mirror_distro_installer_layer]
name=Starlingx-mirror_distro_installer_layer
baseurl=https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/RPMS/installer/
enabled=1

8
centos-mirror-tools/config/centos/containers/yum.repos.d/StarlingX_mirror_flock_layer.repo
View File

@ -1,8 +0,0 @@
#####
# StarlingX flock layer at the StarlingX Mirror
[Starlingx-mirror_flock_std_layer]
name=Starlingx-mirror_flock_std_layer
baseurl=https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/flock/latest_build/outputs/RPMS/std/
enabled=1

29
centos-mirror-tools/config/centos/distro/other_downloads.lst
View File

@ -1,29 +0,0 @@
folder:EFI
folder:EFI/BOOT
#file:EFI/BOOT/mmx64.efi
#file:EFI/BOOT/grubia32.efi
file:EFI/BOOT/grub.cfg
file:EFI/BOOT/BOOTX64.EFI
file:EFI/BOOT/grubx64.efi
#file:EFI/BOOT/BOOTIA32.EFI
#file:EFI/BOOT/mmia32.efi
folder:EFI/BOOT/fonts
file:EFI/BOOT/fonts/unicode.pf2
folder:LiveOS
file:LiveOS/squashfs.img
folder:images
folder:images/pxeboot
file:images/pxeboot/initrd.img
file:images/pxeboot/vmlinuz
file:images/efiboot.img
#file:images/boot.iso
folder:isolinux
file:isolinux/memtest
file:isolinux/grub.conf
file:isolinux/initrd.img
file:isolinux/boot.msg
file:isolinux/vmlinuz
file:isolinux/isolinux.bin
file:isolinux/splash.png
file:isolinux/isolinux.cfg
file:isolinux/vesamenu.c32

2
centos-mirror-tools/config/centos/distro/required_layer_iso_inc.cfg
View File

@ -1,2 +0,0 @@
compiler,std,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/compiler/latest_build/outputs/image.inc
compiler,dev,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/compiler/latest_build/outputs/image-dev.inc

1
centos-mirror-tools/config/centos/distro/required_layer_pkgs.cfg
View File

@ -1 +0,0 @@
compiler,std,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/compiler/latest_build/outputs/RPMS/std/rpm.lst

13
centos-mirror-tools/config/centos/distro/rpms_3rdparties.lst
View File

@ -1,13 +0,0 @@
# glib2-2.56.1-7.el7.x86_64.rpm provided by mock
glib2-devel-2.56.1-7.el7.x86_64.rpm#http://mirror.centos.org/centos/7/os/x86_64/Packages/glib2-devel-2.56.1-7.el7.x86_64.rpm
glib2-doc-2.56.1-7.el7.noarch.rpm#http://mirror.centos.org/centos/7/os/x86_64/Packages/glib2-doc-2.56.1-7.el7.noarch.rpm
kernel-headers-4.18.0-147.3.1.el8_1.x86_64.rpm#http://mirror.centos.org/centos/8.1.1911/BaseOS/x86_64/os/Packages/kernel-headers-4.18.0-147.3.1.el8_1.x86_64.rpm
libpng-1.5.13-8.el7.x86_64.rpm#http://mirror.centos.org/centos/7/os/x86_64/Packages/libpng-1.5.13-8.el7.x86_64.rpm
libpng-devel-1.5.13-8.el7.x86_64.rpm#http://mirror.centos.org/centos/7/os/x86_64/Packages/libpng-devel-1.5.13-8.el7.x86_64.rpm
python2-openstackdocstheme-1.23.2-1.el7.noarch.rpm#https://cbs.centos.org/kojifiles/packages/python-openstackdocstheme/1.23.2/1.el7/noarch/python2-openstackdocstheme-1.23.2-1.el7.noarch.rpm
python2-pip-9.0.3-6.fc29.noarch.rpm#https://kojipkgs.fedoraproject.org/packages/python-pip/9.0.3/6.fc29/noarch/python2-pip-9.0.3-6.fc29.noarch.rpm
python2-pytest-httpbin-0.2.3-6.el7.noarch.rpm#http://cbs.centos.org/kojifiles/packages/python-pytest-httpbin/0.2.3/6.el7/noarch/python2-pytest-httpbin-0.2.3-6.el7.noarch.rpm
python2-pytest-mock-1.6.0-2.el7.noarch.rpm#http://cbs.centos.org/kojifiles/packages/python-pytest-mock/1.6.0/2.el7/noarch/python2-pytest-mock-1.6.0-2.el7.noarch.rpm
python2-sphinxcontrib-apidoc-0.2.1-6.el7.noarch.rpm#https://cbs.centos.org/kojifiles/packages/python-sphinxcontrib-apidoc/0.2.1/6.el7/noarch/python2-sphinxcontrib-apidoc-0.2.1-6.el7.noarch.rpm
python2-wheel-0.31.1-3.fc30.noarch.rpm#https://kojipkgs.fedoraproject.org/packages/python-wheel/0.31.1/3.fc30/noarch/python2-wheel-0.31.1-3.fc30.noarch.rpm
python3-lockfile-0.11.0-13.el8.1.noarch.rpm#https://download-ib01.fedoraproject.org/pub/epel/8/Everything/x86_64/Packages/p/python3-lockfile-0.11.0-13.el8.1.noarch.rpm

1365
centos-mirror-tools/config/centos/distro/rpms_centos.lst
View File

File diff suppressed because it is too large Load Diff

90
centos-mirror-tools/config/centos/distro/rpms_centos3rdparties.lst
View File

@ -1,90 +0,0 @@
adwaita-cursor-theme-3.28.0-1.el7.noarch.rpm
adwaita-icon-theme-3.28.0-1.el7.noarch.rpm
alsa-lib-1.1.6-2.el7.x86_64.rpm
alsa-lib-devel-1.1.6-2.el7.x86_64.rpm
# audit-libs-2.8.4-4.el7.x86_64.rpm provided by mock
audit-libs-devel-2.8.4-4.el7.x86_64.rpm
audit-libs-python-2.8.4-4.el7.x86_64.rpm
copy-jdk-configs-3.3-10.el7_5.noarch.rpm
CUnit-2.1.3-8.el7.x86_64.rpm
CUnit-devel-2.1.3-8.el7.x86_64.rpm
devtoolset-7-binutils-2.28-11.el7.x86_64.rpm
devtoolset-7-gcc-7.3.1-5.10.el7.x86_64.rpm
devtoolset-7-gcc-c++-7.3.1-5.10.el7.x86_64.rpm
devtoolset-7-libstdc++-devel-7.3.1-5.10.el7.x86_64.rpm
devtoolset-7-runtime-7.1-4.el7.x86_64.rpm
# elfutils-0.176-2.el7.x86_64.rpm provided by mock
# elfutils-default-yama-scope-0.176-2.el7.noarch.rpm provided by mock
# elfutils-devel-0.176-2.el7.x86_64.rpm provided by mock
elfutils-devel-static-0.176-2.el7.x86_64.rpm
# elfutils-libelf-0.176-2.el7.x86_64.rpm provided by mock
# elfutils-libelf-devel-0.176-2.el7.x86_64.rpm provided by mock
elfutils-libelf-devel-static-0.176-2.el7.x86_64.rpm
# elfutils-libs-0.176-2.el7.x86_64.rpm provided by mock
gsettings-desktop-schemas-3.28.0-2.el7.x86_64.rpm
gssproxy-0.7.0-21.el7.x86_64.rpm
gtk3-3.22.30-3.el7.x86_64.rpm
gtk3-devel-3.22.30-3.el7.x86_64.rpm
gtk3-devel-docs-3.22.30-3.el7.x86_64.rpm
gtk-update-icon-cache-3.22.30-3.el7.x86_64.rpm
java-1.8.0-openjdk-1.8.0.191.b12-1.el7_6.x86_64.rpm
java-1.8.0-openjdk-devel-1.8.0.191.b12-1.el7_6.x86_64.rpm
java-1.8.0-openjdk-headless-1.8.0.191.b12-1.el7_6.x86_64.rpm
# libblkid-2.23.2-59.el7.x86_64.rpm provided by mock
# libcom_err-1.42.9-13.el7.x86_64.rpm provided by mock
libcom_err-devel-1.42.9-13.el7.x86_64.rpm
libdrm-2.4.91-3.el7.x86_64.rpm
libdrm-devel-2.4.91-3.el7.x86_64.rpm
liboath-2.4.1-9.el7.x86_64.rpm
liboath-devel-2.4.1-9.el7.x86_64.rpm
# libsemanage-2.5-14.el7.x86_64.rpm provided by mock
libsemanage-python-2.5-14.el7.x86_64.rpm
libss-1.42.9-13.el7.x86_64.rpm
libtalloc-2.1.13-1.el7.x86_64.rpm
libtevent-0.9.39-1.el7.x86_64.rpm
lvm2-2.02.177-4.el7.x86_64.rpm
lvm2-libs-2.02.177-4.el7.x86_64.rpm
mesa-libEGL-18.0.5-3.el7.x86_64.rpm
mesa-libEGL-devel-18.0.5-3.el7.x86_64.rpm
mesa-libgbm-18.0.5-3.el7.x86_64.rpm
mesa-libGL-18.0.5-3.el7.x86_64.rpm
mesa-libglapi-18.0.5-3.el7.x86_64.rpm
mesa-libGL-devel-18.0.5-3.el7.x86_64.rpm
NetworkManager-glib-1.12.0-8.el7_6.x86_64.rpm
NetworkManager-glib-devel-1.12.0-8.el7_6.x86_64.rpm
# nss-softokn-3.67.0-3.el7_9.x86_64.rpm provided by mock
nss-softokn-devel-3.67.0-3.el7_9.x86_64.rpm
# nss-softokn-freebl-3.67.0-3.el7_9.x86_64.rpm provided by mock
nss-softokn-freebl-devel-3.67.0-3.el7_9.x86_64.rpm
# openldap-2.4.44-20.el7.x86_64.rpm provided by mock
policycoreutils-2.5-29.el7.x86_64.rpm
policycoreutils-devel-2.5-29.el7.x86_64.rpm
policycoreutils-python-2.5-29.el7.x86_64.rpm
pulseaudio-libs-10.0-5.el7.x86_64.rpm
pulseaudio-libs-devel-10.0-5.el7.x86_64.rpm
pulseaudio-libs-glib2-10.0-5.el7.x86_64.rpm
pykickstart-1.99.66.19-2.el7.noarch.rpm
python2-msgpack-0.6.1-2.el7.x86_64.rpm
python2-pysocks-1.6.8-6.el7.noarch.rpm
python2-scapy-2.4.0-3.el7.noarch.rpm
python2-urllib3-1.21.1-1.el7.noarch.rpm
python2-requests-mock-1.5.2-3.el7.noarch.rpm
rest-0.8.1-2.el7.x86_64.rpm
selinux-policy-3.13.1-229.el7_6.6.noarch.rpm
selinux-policy-devel-3.13.1-229.el7_6.6.noarch.rpm
spice-protocol-0.12.14-1.el7.noarch.rpm
spice-server-0.14.0-9.el7.x86_64.rpm
spice-server-devel-0.14.0-9.el7.x86_64.rpm
# systemd-219-78.el7_9.3.x86_64.rpm provided by mock
# systemd-devel-219-78.el7_9.3.x86_64.rpm provided by mock
# systemd-libs-219-78.el7_9.3.x86_64.rpm provided by mock
# systemd-sysv-219-78.el7_9.3.x86_64.rpm provided by mock
systemtap-3.3-3.el7.x86_64.rpm
systemtap-client-3.3-3.el7.x86_64.rpm
systemtap-devel-3.3-3.el7.x86_64.rpm
systemtap-runtime-3.3-3.el7.x86_64.rpm
systemtap-sdt-devel-3.3-3.el7.x86_64.rpm
# util-linux-2.23.2-59.el7.x86_64.rpm provided by mock
valgrind-3.13.0-13.el7.x86_64.rpm
valgrind-devel-3.13.0-13.el7.x86_64.rpm
zlib-static-1.2.7-18.el7.x86_64.rpm

12
centos-mirror-tools/config/centos/distro/yum.repos.d/StarlingX_mirror_compiler_layer.repo
View File

@ -1,12 +0,0 @@
#####
# StarlingX compiler layer at the StarlingX Mirror
[Starlingx-mirror_compiler_std_layer]
name=Starlingx-mirror_compiler_std_layer
baseurl=https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/compiler/latest_build/outputs/RPMS/std/
enabled=1
[Starlingx-mirror_compiler_installer_layer]
name=Starlingx-mirror_compiler_installer_layer
baseurl=https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/compiler/latest_build/outputs/RPMS/installer/
enabled=1

29
centos-mirror-tools/config/centos/flock/other_downloads.lst
View File

@ -1,29 +0,0 @@
folder:EFI
folder:EFI/BOOT
#file:EFI/BOOT/mmx64.efi
#file:EFI/BOOT/grubia32.efi
file:EFI/BOOT/grub.cfg
file:EFI/BOOT/BOOTX64.EFI
file:EFI/BOOT/grubx64.efi
#file:EFI/BOOT/BOOTIA32.EFI
#file:EFI/BOOT/mmia32.efi
folder:EFI/BOOT/fonts
file:EFI/BOOT/fonts/unicode.pf2
folder:LiveOS
file:LiveOS/squashfs.img
folder:images
folder:images/pxeboot
file:images/pxeboot/initrd.img
file:images/pxeboot/vmlinuz
file:images/efiboot.img
#file:images/boot.iso
folder:isolinux
file:isolinux/memtest
file:isolinux/grub.conf
file:isolinux/initrd.img
file:isolinux/boot.msg
file:isolinux/vmlinuz
file:isolinux/isolinux.bin
file:isolinux/splash.png
file:isolinux/isolinux.cfg
file:isolinux/vesamenu.c32

4
centos-mirror-tools/config/centos/flock/required_layer_iso_inc.cfg
View File

@ -1,4 +0,0 @@
compiler,std,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/compiler/latest_build/outputs/image.inc
compiler,dev,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/compiler/latest_build/outputs/image-dev.inc
distro,std,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/image.inc
distro,dev,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/image-dev.inc

4
centos-mirror-tools/config/centos/flock/required_layer_pkgs.cfg
View File

@ -1,4 +0,0 @@
compiler,std,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/compiler/latest_build/outputs/RPMS/std/rpm.lst
distro,std,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/RPMS/std/rpm.lst
distro,rt,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/RPMS/rt/rpm.lst
distro,installer,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/RPMS/installer/rpm.lst

2
centos-mirror-tools/config/centos/flock/required_layer_wheel_inc.cfg
View File

@ -1,2 +0,0 @@
distro,stable,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/centos_stable_wheels.inc
distro,dev,https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/centos_dev_wheels.inc

19
centos-mirror-tools/config/centos/flock/rpms_3rdparties.lst
View File

@ -1,19 +0,0 @@
ansible-2.7.5-1.el7.ans.noarch.rpm#https://releases.ansible.com/ansible/rpm/release/epel-7-x86_64/ansible-2.7.5-1.el7.ans.noarch.rpm
# glib2-2.56.1-7.el7.x86_64.rpm provided by mock
glib2-devel-2.56.1-7.el7.x86_64.rpm#http://mirror.centos.org/centos/7/os/x86_64/Packages/glib2-devel-2.56.1-7.el7.x86_64.rpm
influxdb-0.9.5.1-1.x86_64.rpm#https://s3.amazonaws.com/influxdb/influxdb-0.9.5.1-1.x86_64.rpm
libpng-1.5.13-8.el7.x86_64.rpm#http://mirror.centos.org/centos/7/os/x86_64/Packages/libpng-1.5.13-8.el7.x86_64.rpm
novnc-0.6.2-1.el7.noarch.rpm#http://cbs.centos.org/kojifiles/packages/novnc/0.6.2/1.el7/noarch/novnc-0.6.2-1.el7.noarch.rpm
libvirt-python-4.7.0-1.fc28.src.rpm#https://libvirt.org/sources/python/libvirt-python-4.7.0-1.fc28.src.rpm
opae-devel-1.3.7-5.el7.x86_64.rpm#https://mirror.starlingx.windriver.com/mirror/centos/github.com/OPAE/opae-sdk/releases/download/1.3.7-5/opae-devel-1.3.7-5.el7.x86_64.rpm
opae-libs-1.3.7-5.el7.x86_64.rpm#https://mirror.starlingx.windriver.com/mirror/centos/github.com/OPAE/opae-sdk/releases/download/1.3.7-5/opae-libs-1.3.7-5.el7.x86_64.rpm
opae-tools-1.3.7-5.el7.x86_64.rpm#https://mirror.starlingx.windriver.com/mirror/centos/github.com/OPAE/opae-sdk/releases/download/1.3.7-5/opae-tools-1.3.7-5.el7.x86_64.rpm
opae-tools-extra-1.3.7-5.el7.x86_64.rpm#https://mirror.starlingx.windriver.com/mirror/centos/github.com/OPAE/opae-sdk/releases/download/1.3.7-5/opae-tools-extra-1.3.7-5.el7.x86_64.rpm
opae.admin-1.0.3-2.el7.noarch.rpm#https://mirror.starlingx.windriver.com/mirror/centos/github.com/OPAE/opae-sdk/releases/download/1.3.7-5/opae.admin-1.0.3-2.el7.noarch.rpm
python2-httpbin-0.5.0-6.el7.noarch.rpm#http://cbs.centos.org/kojifiles/packages/python-httpbin/0.5.0/6.el7/noarch/python2-httpbin-0.5.0-6.el7.noarch.rpm
python2-kubernetes-8.0.0-8.el7.noarch.rpm#https://cbs.centos.org/kojifiles/packages/python-kubernetes/8.0.0/8.el7/noarch/python2-kubernetes-8.0.0-8.el7.noarch.rpm
python2-pip-9.0.3-6.fc29.noarch.rpm#https://kojipkgs.fedoraproject.org/packages/python-pip/9.0.3/6.fc29/noarch/python2-pip-9.0.3-6.fc29.noarch.rpm
python2-storops-0.4.7-2.el7.noarch.rpm#http://cbs.centos.org/kojifiles/packages/python-storops/0.4.7/2.el7/noarch/python2-storops-0.4.7-2.el7.noarch.rpm
python2-wheel-0.31.1-3.fc30.noarch.rpm#https://kojipkgs.fedoraproject.org/packages/python-wheel/0.31.1/3.fc30/noarch/python2-wheel-0.31.1-3.fc30.noarch.rpm
python2-sphinxcontrib-apidoc-0.2.1-6.el7.noarch.rpm#https://cbs.centos.org/kojifiles/packages/python-sphinxcontrib-apidoc/0.2.1/6.el7/noarch/python2-sphinxcontrib-apidoc-0.2.1-6.el7.noarch.rpm
python3-lockfile-0.11.0-16.el8.noarch.rpm#https://cbs.centos.org/kojifiles/packages/python-lockfile/0.11.0/16.el8/noarch/python3-lockfile-0.11.0-16.el8.noarch.rpm

1338
centos-mirror-tools/config/centos/flock/rpms_centos.lst
View File

File diff suppressed because it is too large Load Diff

93
centos-mirror-tools/config/centos/flock/rpms_centos3rdparties.lst
View File

@ -1,93 +0,0 @@
alsa-lib-1.1.6-2.el7.x86_64.rpm
audit-2.8.4-4.el7.x86_64.rpm
# audit-libs-2.8.4-4.el7.x86_64.rpm provided by mock
audit-libs-devel-2.8.4-4.el7.x86_64.rpm
audit-libs-python-2.8.4-4.el7.x86_64.rpm
collectd-5.8.1-4.el7.x86_64.rpm
collectd-python-5.8.1-4.el7.x86_64.rpm
containernetworking-plugins-0.8.1-1.el7.centos.x86_64.rpm
cppcheck-1.88-3.el7.x86_64.rpm
docker-ce-18.09.6-3.el7.x86_64.rpm
docker-ce-cli-18.09.6-3.el7.x86_64.rpm
# elfutils-default-yama-scope-0.176-2.el7.noarch.rpm provided by mock
# elfutils-devel-0.176-2.el7.x86_64.rpm provided by mock
# elfutils-libelf-0.176-2.el7.x86_64.rpm provided by mock
# elfutils-libelf-devel-0.176-2.el7.x86_64.rpm provided by mock
# elfutils-libs-0.176-2.el7.x86_64.rpm provided by mock
gsettings-desktop-schemas-3.28.0-2.el7.x86_64.rpm
gssproxy-0.7.0-21.el7.x86_64.rpm
# ima-evm-utils-1.1-2.el7.x86_64.rpm provided by mock
iprutils-2.4.16.1-1.el7.x86_64.rpm
kata-containers-image-1.11.0-3.1.x86_64.rpm
kata-ksm-throttler-1.11.0-3.1.x86_64.rpm
kata-linux-container-5.4.32.73-3.1.x86_64.rpm
kata-linux-container-debug-5.4.32.73-3.1.x86_64.rpm
kata-proxy-1.11.0-3.1.x86_64.rpm
kata-proxy-bin-1.11.0-3.1.x86_64.rpm
kata-runtime-1.11.0-3.1.x86_64.rpm
kata-shim-1.11.0-3.1.x86_64.rpm
kata-shim-bin-1.11.0-3.1.x86_64.rpm
# libblkid-2.23.2-59.el7.x86_64.rpm provided by mock
# libcom_err-1.42.9-13.el7.x86_64.rpm provided by mock
libcom_err-devel-1.42.9-13.el7.x86_64.rpm
libdrm-2.4.91-3.el7.x86_64.rpm
libldb-1.3.4-1.el7.x86_64.rpm
liboath-2.4.1-9.el7.x86_64.rpm
# libsemanage-2.5-14.el7.x86_64.rpm provided by mock
libsemanage-python-2.5-14.el7.x86_64.rpm
libss-1.42.9-13.el7.x86_64.rpm
libss-devel-1.42.9-13.el7.x86_64.rpm
libtalloc-2.1.13-1.el7.x86_64.rpm
libtdb-1.3.18-1.el7.x86_64.rpm
libtevent-0.9.39-1.el7.x86_64.rpm
libwbclient-4.10.16-18.el7_9.x86_64.rpm
lvm2-2.02.177-4.el7.x86_64.rpm
lvm2-libs-2.02.177-4.el7.x86_64.rpm
# nss-softokn-3.67.0-3.el7_9.x86_64.rpm provided by mock
nss-softokn-devel-3.67.0-3.el7_9.x86_64.rpm
# nss-softokn-freebl-3.67.0-3.el7_9.x86_64.rpm provided by mock
nss-softokn-freebl-devel-3.67.0-3.el7_9.x86_64.rpm
ntfs-3g-2017.3.23-11.el7.x86_64.rpm
ntfs-3g-devel-2017.3.23-11.el7.x86_64.rpm
ntfsprogs-2017.3.23-11.el7.x86_64.rpm
openscap-1.2.17-2.el7.x86_64.rpm
openscap-scanner-1.2.17-2.el7.x86_64.rpm
openstack-tempest-17.2.0-4.el7.noarch.rpm
osinfo-db-20180531-1.el7.noarch.rpm
OVMF-20180508-6.gitee3198e672e2.el7.noarch.rpm
policycoreutils-2.5-29.el7.x86_64.rpm
policycoreutils-newrole-2.5-29.el7.x86_64.rpm
policycoreutils-python-2.5-29.el7.x86_64.rpm
pulseaudio-libs-10.0-5.el7.x86_64.rpm
python2-google-api-client-1.6.3-1.el7.noarch.rpm
python2-manilaclient-1.17.3-1.el7.noarch.rpm
python2-mistralclient-3.1.4-1.el7.noarch.rpm
python2-msgpack-0.6.1-2.el7.x86_64.rpm
python2-os-brick-1.15.6-1.el7.noarch.rpm
python2-pysocks-1.6.8-6.el7.noarch.rpm
python2-scapy-2.4.0-3.el7.noarch.rpm
python2-sushy-1.1.1-1.el7.noarch.rpm
python2-tempestconf-1.1.3-1.el7.noarch.rpm
python2-urllib3-1.21.1-1.el7.noarch.rpm
python-ironic-inspector-client-2.1.0-1.el7.noarch.rpm
python-ironic-lib-2.10.1-1.el7.noarch.rpm
python-libguestfs-1.38.2-12.el7_6.1.x86_64.rpm
python-tempest-17.2.0-4.el7.noarch.rpm
python-virtualenv-15.1.0-2.el7.noarch.rpm
qemu-vanilla-4.1.1+git.99c5874a9b-3.1.x86_64.rpm
qemu-vanilla-bin-4.1.1+git.99c5874a9b-3.1.x86_64.rpm
qemu-vanilla-data-4.1.1+git.99c5874a9b-3.1.x86_64.rpm
samba-client-libs-4.10.16-18.el7_9.x86_64.rpm
samba-common-4.10.16-18.el7_9.noarch.rpm
samba-common-libs-4.10.16-18.el7_9.x86_64.rpm
selinux-policy-3.13.1-229.el7_6.6.noarch.rpm
selinux-policy-minimum-3.13.1-229.el7_6.6.noarch.rpm
selinux-policy-mls-3.13.1-229.el7_6.6.noarch.rpm
selinux-policy-targeted-3.13.1-229.el7_6.6.noarch.rpm
spice-server-0.14.0-9.el7.x86_64.rpm
systemtap-sdt-devel-3.3-3.el7.x86_64.rpm
tcpdump-4.9.2-4.el7_7.1.x86_64.rpm
tkinter-2.7.5-76.el7.x86_64.rpm
tuned-2.8.0-5.el7.noarch.rpm
tuned-profiles-realtime-2.8.0-5.el7.noarch.rpm
# util-linux-2.23.2-59.el7.x86_64.rpm provided by mock

12
centos-mirror-tools/config/centos/flock/yum.repos.d/StarlingX_mirror_compiler_layer.repo
View File

@ -1,12 +0,0 @@
#####
# StarlingX compiler layer at the StarlingX Mirror
[Starlingx-mirror_compiler_std_layer]
name=Starlingx-mirror_compiler_std_layer
baseurl=https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/compiler/latest_build/outputs/RPMS/std/
enabled=1
[Starlingx-mirror_compiler_installer_layer]
name=Starlingx-mirror_compiler_installer_layer
baseurl=https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/compiler/latest_build/outputs/RPMS/installer/
enabled=1

18
centos-mirror-tools/config/centos/flock/yum.repos.d/StarlingX_mirror_distro_layer.repo
View File

@ -1,18 +0,0 @@
#####
# StarlingX distro layer at the StarlingX Mirror
[Starlingx-mirror_distro_std_layer]
name=Starlingx-mirror_distro_std_layer
baseurl=https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/RPMS/std/
enabled=1
[Starlingx-mirror_distro_rt_layer]
name=Starlingx-mirror_distro_rt_layer
baseurl=https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/RPMS/rt/
enabled=1
[Starlingx-mirror_distro_installer_layer]
name=Starlingx-mirror_distro_installer_layer
baseurl=https://mirror.starlingx.windriver.com/mirror/starlingx/master/centos/distro/latest_build/outputs/RPMS/installer/
enabled=1

1
centos-mirror-tools/config/centos/mock/rpms_3rdparties.lst
View File

@ -1 +0,0 @@
glib2-2.56.1-7.el7.x86_64.rpm#http://mirror.centos.org/centos/7/os/x86_64/Packages/glib2-2.56.1-7.el7.x86_64.rpm

184
centos-mirror-tools/config/centos/mock/rpms_centos.lst
View File

@ -1,184 +0,0 @@
acl-2.2.51-14.el7.x86_64.rpm
annobin-9.12-1.el7.x86_64.rpm
basesystem-10.0-7.el7.centos.noarch.rpm
# bash-4.2.46-31.el7.x86_64.rpm
binutils-2.27-41.base.el7.x86_64.rpm
bzip2-1.0.6-13.el7.x86_64.rpm
bzip2-libs-1.0.6-13.el7.x86_64.rpm
ca-certificates-2018.2.22-70.0.el7_5.noarch.rpm
centos-release-7-6.1810.2.el7.centos.x86_64.rpm
chkconfig-1.7.4-1.el7.x86_64.rpm
coreutils-8.22-23.el7.x86_64.rpm
cpio-2.11-27.el7.x86_64.rpm
cpp-4.8.5-36.el7.x86_64.rpm
cracklib-2.9.0-11.el7.x86_64.rpm
cracklib-dicts-2.9.0-11.el7.x86_64.rpm
cryptsetup-libs-2.0.3-3.el7.x86_64.rpm
curl-7.29.0-59.el7.x86_64.rpm
cyrus-sasl-lib-2.1.26-23.el7.x86_64.rpm
dbus-1.10.24-15.el7.x86_64.rpm
dbus-libs-1.10.24-15.el7.x86_64.rpm
device-mapper-1.02.146-4.el7.x86_64.rpm
device-mapper-libs-1.02.146-4.el7.x86_64.rpm
diffutils-3.3-4.el7.x86_64.rpm
dracut-033-554.el7.x86_64.rpm
dwz-0.11-3.el7.x86_64.rpm
epel-release-7-11.noarch.rpm
epel-rpm-macros-7-21.noarch.rpm
expat-2.1.0-14.el7_9.x86_64.rpm
fedpkg-minimal-1.1.0-7.el7.noarch.rpm
file-5.11-37.el7.x86_64.rpm
file-libs-5.11-37.el7.x86_64.rpm
filesystem-3.2-25.el7.x86_64.rpm
findutils-4.5.11-6.el7.x86_64.rpm
gawk-4.0.2-4.el7_3.1.x86_64.rpm
gcc-4.8.5-36.el7.x86_64.rpm
gcc-c++-4.8.5-36.el7.x86_64.rpm
gdb-7.6.1-114.el7.x86_64.rpm
gdbm-1.10-8.el7.x86_64.rpm
glibc-2.17-323.el7_9.x86_64.rpm
glibc-common-2.17-323.el7_9.x86_64.rpm
glibc-devel-2.17-323.el7_9.x86_64.rpm
glibc-headers-2.17-323.el7_9.x86_64.rpm
gmp-6.0.0-15.el7.x86_64.rpm
gnupg2-2.0.22-5.el7_5.x86_64.rpm
gpgme-1.3.2-5.el7.x86_64.rpm
grep-2.20-3.el7.x86_64.rpm
groff-base-1.22.2-8.el7.x86_64.rpm
gzip-1.5-10.el7.x86_64.rpm
hardlink-1.0-19.el7.x86_64.rpm
hostname-3.13-3.el7.x86_64.rpm
info-5.1-5.el7.x86_64.rpm
json-c-0.11-4.el7_0.x86_64.rpm
keyutils-libs-1.5.8-3.el7.x86_64.rpm
kmod-20-23.el7.x86_64.rpm
kmod-libs-20-23.el7.x86_64.rpm
kpartx-0.4.9-119.el7.x86_64.rpm
krb5-libs-1.15.1-34.el7.x86_64.rpm
lbzip2-2.5-1.el7.x86_64.rpm
libacl-2.2.51-14.el7.x86_64.rpm
libarchive-3.1.2-10.el7_2.x86_64.rpm
libassuan-2.1.0-3.el7.x86_64.rpm
libattr-2.4.46-13.el7.x86_64.rpm
libcap-2.22-9.el7.x86_64.rpm
libcap-ng-0.7.5-4.el7.x86_64.rpm
libcurl-7.29.0-59.el7.x86_64.rpm
libcurl-devel-7.29.0-59.el7.x86_64.rpm
libdb-5.3.21-24.el7.x86_64.rpm
libdb-utils-5.3.21-24.el7.x86_64.rpm
libffi-3.0.13-18.el7.x86_64.rpm
libgcc-4.8.5-36.el7.x86_64.rpm
libgcrypt-1.5.3-14.el7.x86_64.rpm
libgomp-4.8.5-36.el7.x86_64.rpm
libgpg-error-1.12-3.el7.x86_64.rpm
libidn-1.28-4.el7.x86_64.rpm
libmount-2.23.2-59.el7.x86_64.rpm
libmpc-1.0.1-3.el7.x86_64.rpm
libpwquality-1.2.3-5.el7.x86_64.rpm
libselinux-2.5-14.1.el7.x86_64.rpm
libsepol-2.5-10.el7.x86_64.rpm
libsmartcols-2.23.2-59.el7.x86_64.rpm
libssh2-1.8.0-4.el7.x86_64.rpm
libssh2-devel-1.8.0-4.el7.x86_64.rpm
libstdc++-4.8.5-36.el7.x86_64.rpm
libstdc++-devel-4.8.5-36.el7.x86_64.rpm
libtasn1-4.10-1.el7.x86_64.rpm
libuser-0.60-9.el7.x86_64.rpm
libutempter-1.1.6-4.el7.x86_64.rpm
libuuid-2.23.2-59.el7.x86_64.rpm
libverto-0.2.5-4.el7.x86_64.rpm
libxml2-2.9.1-6.el7_9.6.x86_64.rpm
lua-5.1.4-15.el7.x86_64.rpm
lz4-1.7.5-2.el7.x86_64.rpm
lzo-2.06-8.el7.x86_64.rpm
make-3.82-23.el7.x86_64.rpm
mpfr-3.1.1-4.el7.x86_64.rpm
ncurses-5.9-14.20130511.el7_4.x86_64.rpm
ncurses-base-5.9-14.20130511.el7_4.noarch.rpm
ncurses-libs-5.9-14.20130511.el7_4.x86_64.rpm
nspr-4.32.0-1.el7_9.x86_64.rpm
nss-3.67.0-4.el7_9.x86_64.rpm
nss-pem-1.0.3-5.el7.x86_64.rpm
nss-sysinit-3.67.0-4.el7_9.x86_64.rpm
nss-tools-3.67.0-4.el7_9.x86_64.rpm
nss-util-3.67.0-1.el7_9.x86_64.rpm
openldap-2.4.44-20.el7.x86_64.rpm
openssl-libs-1.0.2k-16.el7.x86_64.rpm
p11-kit-0.23.5-3.el7.x86_64.rpm
p11-kit-trust-0.23.5-3.el7.x86_64.rpm
pam-1.1.8-22.el7.x86_64.rpm
patch-2.7.1-10.el7_5.x86_64.rpm
pcre-8.32-17.el7.x86_64.rpm
perl-5.16.3-299.el7_9.x86_64.rpm
perl-Carp-1.26-244.el7.noarch.rpm
perl-constant-1.27-2.el7.noarch.rpm
perl-Encode-2.51-7.el7.x86_64.rpm
perl-Exporter-5.68-3.el7.noarch.rpm
perl-File-Path-2.09-2.el7.noarch.rpm
perl-File-Temp-0.23.01-3.el7.noarch.rpm
perl-Filter-1.49-3.el7.x86_64.rpm
perl-Getopt-Long-2.40-3.el7.noarch.rpm
perl-HTTP-Tiny-0.033-3.el7.noarch.rpm
perl-libs-5.16.3-299.el7_9.x86_64.rpm
perl-macros-5.16.3-299.el7_9.x86_64.rpm
perl-parent-0.225-244.el7.noarch.rpm
perl-PathTools-3.40-5.el7.x86_64.rpm
perl-Pod-Escapes-1.04-299.el7_9.noarch.rpm
perl-podlators-2.5.1-3.el7.noarch.rpm
perl-Pod-Perldoc-3.20-4.el7.noarch.rpm
perl-Pod-Simple-3.28-4.el7.noarch.rpm
perl-Pod-Usage-1.63-3.el7.noarch.rpm
perl-Scalar-List-Utils-1.27-248.el7.x86_64.rpm
perl-Socket-2.010-4.el7.x86_64.rpm
perl-srpm-macros-1-8.el7.noarch.rpm
perl-Storable-2.45-3.el7.x86_64.rpm
perl-Text-ParseWords-3.29-4.el7.noarch.rpm
perl-Thread-Queue-3.02-2.el7.noarch.rpm
perl-threads-1.87-4.el7.x86_64.rpm
perl-threads-shared-1.43-6.el7.x86_64.rpm
perl-Time-HiRes-1.9725-3.el7.x86_64.rpm
perl-Time-Local-1.2300-2.el7.noarch.rpm
pigz-2.3.4-1.el7.x86_64.rpm
pinentry-0.8.1-17.el7.x86_64.rpm
pkgconfig-0.27.1-4.el7.x86_64.rpm
popt-1.13-16.el7.x86_64.rpm
procps-ng-3.3.10-28.el7.x86_64.rpm
pth-2.0.7-23.el7.x86_64.rpm
pygpgme-0.3-9.el7.x86_64.rpm
pyliblzma-0.5.3-11.el7.x86_64.rpm
# python-2.7.5-89.el7.x86_64.rpm
# python-devel-2.7.5-89.el7.x86_64.rpm
python2-rpm-macros-3-34.el7.noarch.rpm
python-iniparse-0.4-9.el7.noarch.rpm
# python-libs-2.7.5-89.el7.x86_64.rpm
python-pycurl-7.19.0-19.el7.x86_64.rpm
python-rpm-macros-3-34.el7.noarch.rpm
python-srpm-macros-3-34.el7.noarch.rpm
python-urlgrabber-3.10-9.el7.noarch.rpm
pyxattr-0.5.1-5.el7.x86_64.rpm
qrencode-libs-3.4.1-3.el7.x86_64.rpm
readline-6.2-10.el7.x86_64.rpm
redhat-rpm-config-9.1.0-87.el7.centos.noarch.rpm
# rpm-4.11.3-35.el7.x86_64.rpm
# rpm-build-4.11.3-35.el7.x86_64.rpm
# rpm-build-libs-4.11.3-35.el7.x86_64.rpm
# rpm-libs-4.11.3-35.el7.x86_64.rpm
# rpm-python-4.11.3-35.el7.x86_64.rpm
sed-4.2.2-5.el7.x86_64.rpm
setup-2.8.71-10.el7.noarch.rpm
shadow-utils-4.1.5.1-25.el7.x86_64.rpm
shared-mime-info-1.8-4.el7.x86_64.rpm
sqlite-3.7.17-8.el7_7.1.x86_64.rpm
tar-1.26-35.el7.x86_64.rpm
tzdata-2018g-1.el7.noarch.rpm
unzip-6.0-21.el7.x86_64.rpm
ustr-1.0.4-16.el7.x86_64.rpm
which-2.20-7.el7.x86_64.rpm
xz-5.2.2-1.el7.x86_64.rpm
xz-libs-5.2.2-1.el7.x86_64.rpm
yum-3.4.3-161.el7.centos.noarch.rpm
yum-metadata-parser-1.1.4-10.el7.x86_64.rpm
yum-plugin-fastestmirror-1.1.31-50.el7.noarch.rpm
yum-plugin-priorities-1.1.31-54.el7_8.noarch.rpm
zip-3.0-11.el7.x86_64.rpm
zlib-1.2.7-18.el7.x86_64.rpm

18
centos-mirror-tools/config/centos/mock/rpms_centos3rdparties.lst
View File

@ -1,18 +0,0 @@
audit-libs-2.8.4-4.el7.x86_64.rpm
elfutils-0.176-2.el7.x86_64.rpm
elfutils-default-yama-scope-0.176-2.el7.noarch.rpm
elfutils-devel-0.176-2.el7.x86_64.rpm
elfutils-libelf-0.176-2.el7.x86_64.rpm
elfutils-libelf-devel-0.176-2.el7.x86_64.rpm
elfutils-libs-0.176-2.el7.x86_64.rpm
ima-evm-utils-1.1-2.el7.x86_64.rpm
libblkid-2.23.2-59.el7.x86_64.rpm
libcom_err-1.42.9-13.el7.x86_64.rpm
libsemanage-2.5-14.el7.x86_64.rpm
nss-softokn-3.67.0-3.el7_9.x86_64.rpm
nss-softokn-freebl-3.67.0-3.el7_9.x86_64.rpm
systemd-219-78.el7_9.3.x86_64.rpm
systemd-devel-219-78.el7_9.3.x86_64.rpm
systemd-libs-219-78.el7_9.3.x86_64.rpm
systemd-sysv-219-78.el7_9.3.x86_64.rpm
util-linux-2.23.2-59.el7.x86_64.rpm

536
centos-mirror-tools/dl_lower_layer_rpms.sh
View File

@ -1,536 +0,0 @@
#!/bin/bash
#
# Copyright (c) 2020 Wind River Systems, Inc.
#
# SPDX-License-Identifier: Apache-2.0
#
#
# Fast download of StarlingX built rpms using verifytree and repsync
#
DL_LOWER_LAYER_RPMS_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
source $DL_LOWER_LAYER_RPMS_DIR/utils.sh
usage() {
echo "$0 -l <layer> -b <build_type> -r <url> <rpms_list> <match_level> [ -c <yum.conf> ] [-D <distro> ] [-s|-S|-u|-U] [-x]"
echo ""
echo "Options:"
echo " -b: <build type>: e.g. std, rt, installer."
echo " -c: Use an alternate yum.conf rather than the system file"
echo " -l: <layer>: e.g. compiler, distro, flock."
echo " -r: <url>: Url of the root of the repo. Expect to find a repodata dir there."
echo " -x: Clean log files only, do not run."
echo " rpm_list: a list of RPM files to be downloaded."
echo " match_level: value could be L1, L2 or L3:"
echo " L1: use name, major version and minor version:"
echo " vim-7.4.160-2.el7 to search vim-7.4.160-2.el7.src.rpm"
echo " L2: use name and major version:"
echo " using vim-7.4.160 to search vim-7.4.160-2.el7.src.rpm"
echo " L3: use name:"
echo " using vim to search vim-7.4.160-2.el7.src.rpm"
echo " K1: Use Koji rather than yum repos as a source."
echo " Koji has a longer retention period than epel mirrors."
echo ""
echo " Download Source Options: Only select one of these."
echo " -s: Download from StarlingX mirror only"
echo " -S: Download from StarlingX mirror, upstream as backup (default)"
echo " -u: Download from original upstream sources only"
echo " -U: Download from original upstream sources, StarlingX mirror as backup"
echo ""
echo "Returns: 0 = All files downloaded successfully"
echo " 1 = Some files could not be downloaded"
echo " 2 = Bad arguements or other error"
echo ""
}
CLEAN_LOGS_ONLY=0
dl_rc=0
# Permitted values of dl_source
dl_from_stx_mirror="stx_mirror"
dl_from_upstream="upstream"
dl_from_stx_then_upstream="$dl_from_stx_mirror $dl_from_upstream"
dl_from_upstream_then_stx="$dl_from_upstream $dl_from_stx_mirror"
# Download from what source?
# dl_from_stx_mirror = StarlingX mirror only
# dl_from_upstream = Original upstream source only
# dl_from_stx_then_upstream = Either source, STX prefered (default)"
# dl_from_upstream_then_stx = Either source, UPSTREAM prefered"
dl_source="$dl_from_stx_then_upstream"
dl_flag=""
build_type=""
lower_layer=""
url_root=""
distro="centos"
# Set a default yum.conf which can be overridden by use of '-c' option.
# I assume we are called from download_mirror.sh and are already in
# stx-tools/centos-mirror-tools directory.
YUM_CONF=yum.conf.sample
MULTIPLE_DL_FLAG_ERROR_MSG="Error: Please use only one of: -s,-S,-u,-U"
multiple_dl_flag_check () {
if [ "$dl_flag" != "" ]; then
echo "$MULTIPLE_DL_FLAG_ERROR_MSG"
usage
exit 1
fi
}
# Parse option flags
while getopts "b:c:l:D:hr:sSuUx" o; do
case "${o}" in
b)
build_type="$OPTARG"
;;
c)
# Use an alternate yum.conf
YUM_CONF="$OPTARG"
;;
D)
distro="${OPTARG}"
;;
l)
lower_layer="$OPTARG"
;;
r)
# URL
url_root="${OPTARG}"
;;
s)
# Download from StarlingX mirror only. Do not use upstream sources.
multiple_dl_flag_check
dl_source="$dl_from_stx_mirror"
dl_flag="-s"
;;
S)
# Download from StarlingX mirror first, only use upstream source as a fallback.
multiple_dl_flag_check
dl_source="$dl_from_stx_then_upstream"
dl_flag="-S"
;;
u)
# Download from upstream only. Do not use StarlingX mirror.
multiple_dl_flag_check
dl_source="$dl_from_upstream"
dl_flag="-u"
;;
U)
# Download from upstream first, only use StarlingX mirror as a fallback.
multiple_dl_flag_check
dl_source="$dl_from_upstream_then_stx"
dl_flag="-U"
;;
x)
# Clean only
CLEAN_LOGS_ONLY=1
;;
h)
# Help
usage
exit 0
;;
*)
usage
exit 2
;;
esac
done
shift $((OPTIND-1))
if [ -z "${build_type}" ] || [ -z "${lower_layer}" ] || [ -z "${url_root}" ]; then
usage
exit 2
fi
if [ $# -lt 2 ]; then
usage
exit 2
fi
if [ "$1" == "" ]; then
echo "Need to supply the rpm file list"
exit 2;
else
rpms_list=$1
echo "using $rpms_list as the download name lists"
fi
match_level="L1"
if [ ! -z "$2" -a "$2" != " " ];then
match_level=$2
fi
if [ ! -f ${YUM_CONF} ]; then
echo "ERROR: failed to find ${YUM_CONF}"
usage
exit 2
fi
timestamp=$(date +%F_%H%M)
echo $timestamp
export DL_MIRROR_LOG_DIR="${DL_MIRROR_LOG_DIR:-./logs}"
export DL_MIRROR_OUTPUT_DIR="${DL_MIRROR_OUTPUT_DIR:-./output/stx/CentOS}"
dl_dir="$(readlink -f ${DL_MIRROR_OUTPUT_DIR})/layer_repos/${lower_layer}/${build_type}"
LOGSDIR="${DL_MIRROR_LOG_DIR}"
MISSING_RPMS="$LOGSDIR/${match_level}_rpms_missing_${lower_layer}_${build_type}.log"
FOUND_RPMS="$LOGSDIR/${match_level}_rpms_found_${lower_layer}_${build_type}.log"
cat /dev/null > $MISSING_RPMS
cat /dev/null > $FOUND_RPMS
if [ $CLEAN_LOGS_ONLY -eq 1 ];then
exit 0
fi
CREATEREPO=$(which createrepo_c)
if [ $? -ne 0 ]; then
CREATEREPO="createrepo"
fi
number_of_cpus () {
/usr/bin/nproc
}
# FIXME: curl would work better here, but it doesn't support recursive downloads.
#
# Wget corrupts files in some cases:
# - if the download stalls half-way and --tries is set to > 1, and the web
# server doesn't support the Range header with the upper limit omitted,
# (eg Range: bytes=18671712-) wget returns success (0) and leaves a partial
# file behind
# - if download fails half-way, or wget is interrupted, wget returns
# non-zero, but may leave a partial file behind. This is to be expected,
# but we can't easily tell which files were downloaded fully in this case.
#
# See https://bugs.launchpad.net/starlingx/+bug/1950017
get_remote_dir () {
local url="${1}"
local dest_dir="${2}"
mkdir -p "${dest_dir}" || return 1
\rm "${dest_dir}/"index.html*
wget -c -N --timeout 15 --recursive --no-parent --no-host-directories --no-directories --directory-prefix="${dest_dir}" "${url}/"
}
get_remote_file_overwrite () {
local url="${1}"
local dest_dir="${2}"
local dest_file="${dest_dir}/$(basename ${url})"
mkdir -p "${dest_dir}" || return 1
if [ -f "${dest_file}" ]; then
\rm "${dest_file}"
fi
download_file --timestamps "$url" "$dest_file"
}
clean_repodata () {
local repodata="${1}"
local f=""
local f2=""
if [ ! -f "${repodata}/repomd.xml" ]; then
echo "Error: clean_repodata: file not found: ${repodata}/repomd.xml"
return 1
fi
for f in $(find "${repodata}" -name '[a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]*'); do
f2=$(basename "${f}")
if ! grep -q "${f2}" "${repodata}/repomd.xml"; then
\rm "${f}"
fi
done
}
dl_repo () {
local base_url="${1}"
local dl_dir="${2}"
local rpms_list="${3}"
if [ -z "${base_url}" ] || [ -z "${dl_dir}" ] || [ -z "${rpms_list}" ]; then
echo "ERROR: dl_repo: missing arguement"
return 1
fi
if [ ! -f "${rpms_list}" ]; then
echo "ERROR: dl_repo: no such file '${rpms_list}'"
return 1
fi
local REPO_URL="${base_url}"
local DOWNLOAD_PATH="${dl_dir}"
local DOWNLOAD_PATH_NEW="${DOWNLOAD_PATH}.new"
local DOWNLOAD_PATH_OLD="${DOWNLOAD_PATH}.old"
mkdir -p "${DOWNLOAD_PATH}"
local YUM_CONF_TMP
local TMP
local YUM_CONF_DIR_TMP
local MUNGED_LIST
local YUM_CONF_NAME
YUM_CONF_NAME=$(basename "${YUM_CONF}")
YUM_CONF_TMP="$(mktemp "/tmp/${YUM_CONF_NAME}.XXXXXX")"
TMP=$(basename "${YUM_CONF_TMP}" | sed "s#^${YUM_CONF_NAME}.##")
YUM_CONF_DIR=$(dirname "${YUM_CONF_TMP}")
YUM_REPOS_DIR_TMP="${YUM_CONF_DIR}/yum.repos.d.${TMP}"
MUNGED_LIST="${YUM_CONF_DIR}/yum.lst.${TMP}"
grep -v '^$' "${rpms_list}" | grep -v '^#' | sed 's#^\(.*\)[.]rpm#\t\1#' | sort --unique > ${MUNGED_LIST}
\cp "${YUM_CONF}" "${YUM_CONF_TMP}"
sed -i "s#^reposdir=.*#reposdir=${YUM_REPOS_DIR_TMP}#" "${YUM_CONF_TMP}"
mkdir -p "${YUM_REPOS_DIR_TMP}"
REPOID=${lower_layer}_${build_type}
REPO_FILE="${YUM_REPOS_DIR_TMP}/${REPOID}.repo"
echo "[${REPOID}]" > "${REPO_FILE}"
echo "name=${REPOID}" >> "${REPO_FILE}"
echo "baseurl=${REPO_URL}" >> "${REPO_FILE}"
echo "includepkgs=" >> "${REPO_FILE}"
echo "include=file://${MUNGED_LIST}" >> "${REPO_FILE}"
echo "enabled=0" >> "${REPO_FILE}"
# copy repo to a temp location
if [ -d "${DOWNLOAD_PATH_NEW}" ]; then
\rm -rf "${DOWNLOAD_PATH_NEW}"
fi
if [ -d "${DOWNLOAD_PATH}" ]; then
CMD="\cp --archive --link '${DOWNLOAD_PATH}' '${DOWNLOAD_PATH_NEW}'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
return 1
fi
fi
# Download latest repodata
get_remote_dir "${REPO_URL}/repodata" "${DOWNLOAD_PATH_NEW}/repodata.upstream"
if [ $? -ne 0 ]; then
echo "Error: get_remote_dir ${REPO_URL}/repodata ${DOWNLOAD_PATH_NEW}/repodata.upstream"
return 1
fi
get_remote_file_overwrite "${REPO_URL}/repodata/repomd.xml" "${DOWNLOAD_PATH_NEW}/repodata.upstream/"
if [ $? -ne 0 ]; then
echo "Error: get_remote_file_overwrite ${REPO_URL}/repodata/repomd.xml ${DOWNLOAD_PATH_NEW}/repodata.upstream/"
return 1
fi
clean_repodata "${DOWNLOAD_PATH_NEW}/repodata.upstream/"
# Download latest rpm.lst
get_remote_file_overwrite "${REPO_URL}/rpm.lst" "${DOWNLOAD_PATH_NEW}/"
#
# Delete rpms that are no longer valid
#
# Save active repodata as local
if [ -d "${DOWNLOAD_PATH_NEW}/repodata" ]; then
CMD="\mv '${DOWNLOAD_PATH_NEW}/repodata' '${DOWNLOAD_PATH_NEW}/repodata.local'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
return 1
fi
fi
# Make upstream repodata the active copy
CMD="\mv '${DOWNLOAD_PATH_NEW}/repodata.upstream' '${DOWNLOAD_PATH_NEW}/repodata'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
return 1
fi
# Do the audit, delete anything broken
for f in $(verifytree -a "file://${DOWNLOAD_PATH_NEW}" | \
sed '1,/Checking all packages/d' | \
grep -v ' FAILED$' | \
awk '{ print $2 }' | \
sed 's/^[0-9]*://'); do
echo "Already have $f"
done
for f in $(verifytree -a "file://${DOWNLOAD_PATH_NEW}" | \
sed '1,/Checking all packages/d' | \
grep ' FAILED$' | \
awk '{ print $2 }' | \
sed 's/^[0-9]*://'); do
echo "Downloading $f"
for f_path in $(find "${DOWNLOAD_PATH_NEW}" -name ${f}.rpm); do
CMD="\rm '${f_path}'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
return 1
fi
done
done
# deactivate and restore upstream repo data
CMD="\mv '${DOWNLOAD_PATH_NEW}/repodata' '${DOWNLOAD_PATH_NEW}/repodata.upstream'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
return 1
fi
# Restore our active repodata
if [ -d "${DOWNLOAD_PATH_NEW}/repodata.local" ]; then
CMD="\mv '${DOWNLOAD_PATH_NEW}/repodata.local' '${DOWNLOAD_PATH_NEW}/repodata'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
return 1
fi
fi
# Sync the repo's rpms
CMD="reposync --tempcache --norepopath -l --config='${YUM_CONF_TMP}' --repoid=$REPOID --download_path='${DOWNLOAD_PATH_NEW}'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
return 1
fi
CMD="pushd '${DOWNLOAD_PATH_NEW}'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
return 1
fi
# Update the repodata
OPTIONS="--workers $(number_of_cpus)"
if [ -f comps.xml ]; then
OPTIONS="$OPTIONS -g comps.xml"
fi
if [ -d repodata ]; then
OPTIONS="$OPTIONS --update"
fi
CMD="$CREATEREPO $OPTIONS ."
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
popd
return 1
fi
popd
# Swap out the old copy of our repo
if [ -d "${DOWNLOAD_PATH}" ]; then
CMD="\mv '${DOWNLOAD_PATH}' '${DOWNLOAD_PATH_OLD}'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
\rm -rf "${DOWNLOAD_PATH_NEW}"
return 1
fi
fi
# Swap in the updated repo
CMD="\mv '${DOWNLOAD_PATH_NEW}' '${DOWNLOAD_PATH}'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
\mv "${DOWNLOAD_PATH_NEW}" "${DOWNLOAD_PATH}"
return 1
fi
# Delete the old repo
if [ -d "${DOWNLOAD_PATH_OLD}" ]; then
CMD="\rm -rf '${DOWNLOAD_PATH_OLD}'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
fi
fi
CMD="\rm '${YUM_CONF_TMP}'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
fi
CMD="\rm '${MUNGED_LIST}'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
fi
CMD="\rm -rf '${YUM_REPOS_DIR_TMP}'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
fi
return 0
}
#
# Loop over download sources... typically the STX mirror folowed by upstream
# ... until we have all the rpms.
#
RC=1
for dl_src in $dl_source; do
url_root_to_use="${url_root}"
case $dl_src in
$dl_from_stx_mirror)
url_root_to_use="$(url_to_stx_mirror_url "${url_root}" ${distro})"
;;
$dl_from_upstream)
url_root_to_use="${url_root}"
;;
*)
echo "Error: Unknown dl_source '$dl_src'"
continue
;;
esac
dl_repo "${url_root_to_use}" "${dl_dir}" "${rpms_list}"
if [ $? -eq 0 ]; then
RC=0
break
fi
done
for rpm_name in $(grep -v '^$' "${rpms_list}" | grep -v '^#' ); do
if [ ! -f "${dl_dir}/${rpm_name}" ]; then
echo "${rpm_name}" >> $MISSING_RPMS
echo "Failed to download: ${rpm_name}"
RC=1
fi
done
exit $RC

192
centos-mirror-tools/dl_other_from_centos_repo.sh
View File

@ -1,192 +0,0 @@
#!/bin/bash -e
#
# SPDX-License-Identifier: Apache-2.0
#
#
# Download non-RPM files from https://vault.centos.org/7.4.1708/os/x86_64/
#
DL_OTHER_FROM_CENTOS_REPO_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
source $DL_OTHER_FROM_CENTOS_REPO_DIR/url_utils.sh
source $DL_OTHER_FROM_CENTOS_REPO_DIR/utils.sh
usage () {
echo "$0 [-D <distro>] [-s|-S|-u|-U] [-h] <other_download_list.ini> <save_path> [<force_update>]"
}
# Permitted values of dl_source
dl_from_stx_mirror="stx_mirror"
dl_from_upstream="upstream"
dl_from_stx_then_upstream="$dl_from_stx_mirror $dl_from_upstream"
dl_from_upstream_then_stx="$dl_from_upstream $dl_from_stx_mirror"
# Download from what source?
# dl_from_stx_mirror = StarlingX mirror only
# dl_from_upstream = Original upstream source only
# dl_from_stx_then_upstream = Either source, STX prefered (default)"
# dl_from_upstream_then_stx = Either source, UPSTREAM prefered"
dl_source="$dl_from_stx_then_upstream"
dl_flag=""
distro="centos"
MULTIPLE_DL_FLAG_ERROR_MSG="Error: Please use only one of: -s,-S,-u,-U"
multiple_dl_flag_check () {
if [ "$dl_flag" != "" ]; then
echo "$MULTIPLE_DL_FLAG_ERROR_MSG"
usage
exit 1
fi
}
# Parse out optional arguments
while getopts "D:hsSuU" o; do
case "${o}" in
D)
distro="${OPTARG}"
;;
s)
# Download from StarlingX mirror only. Do not use upstream sources.
multiple_dl_flag_check
dl_source="$dl_from_stx_mirror"
dl_flag="-s"
;;
S)
# Download from StarlingX mirror only. Do not use upstream sources.
multiple_dl_flag_check
dl_source="$dl_from_stx_then_upstream"
dl_flag="-S"
;;
u)
# Download from upstream only. Do not use StarlingX mirror.
multiple_dl_flag_check
dl_source="$dl_from_upstream"
dl_flag="-u"
;;
U)
# Download from upstream only. Do not use StarlingX mirror.
multiple_dl_flag_check
dl_source="$dl_from_upstream_then_stx"
dl_flag="-U"
;;
h)
# Help
usage
exit 0
;;
*)
usage
exit 1
;;
esac
done
shift $((OPTIND-1))
if [ $# -lt 2 ]; then
usage
exit -1
fi
download_list=$1
if [ ! -e $download_list ];then
echo "$download_list does not exist, please have a check!!"
exit -1
fi
save_path=$2
upstream_url_prefix="http://mirror.centos.org/7.6.1810/os/x86_64/"
stx_mirror_url_prefix="$(url_to_stx_mirror_url "$upstream_url_prefix" "$distro")"
echo "NOTE: please assure Internet access to $upstream_url_prefix !!"
force_update=$3
i=0
error_count=0
all=`cat $download_list`
for ff in $all; do
## skip commented_out item which starts with '#'
if [[ "$ff" =~ ^'#' ]]; then
echo "skip $ff"
continue
fi
_type=`echo $ff | cut -d":" -f1-1`
_name=`echo $ff | cut -d":" -f2-2`
if [ "$_type" == "folder" ];then
mkdir -p $save_path/$_name
if [ $? -ne 0 ]; then
echo "Error: mkdir -p '$save_path/$_name'"
error_count=$((error_count + 1))
fi
else
if [ -e "$save_path/$_name" ]; then
echo "Already have $save_path/$_name"
continue
fi
for dl_src in $dl_source; do
case $dl_src in
$dl_from_stx_mirror)
url_prefix="$stx_mirror_url_prefix"
;;
$dl_from_upstream)
url_prefix="$upstream_url_prefix"
;;
*)
echo "Error: Unknown dl_source '$dl_src'"
continue
;;
esac
echo "remote path: $url_prefix/$_name"
echo "local path: $save_path/$_name"
if download_file $url_prefix/$_name; then
file_name=`basename $_name`
sub_path=`dirname $_name`
if [ -e "./$file_name" ]; then
let i+=1
echo "$file_name is downloaded successfully"
mkdir -p $save_path/$sub_path
if [ $? -ne 0 ]; then
echo "Error: mkdir -p '$save_path/$sub_path'"
error_count=$((error_count + 1))
fi
\mv -f ./$file_name $save_path/$_name
if [ $? -ne 0 ]; then
echo "Error: mv -f './$file_name' '$save_path/$_name'"
error_count=$((error_count + 1))
fi
ls -l $save_path/$_name
fi
break
else
echo "Warning: failed to download $url_prefix/$_name"
fi
done
if [ ! -e "$save_path/$_name" ]; then
echo "Error: failed to download '$url_prefix/$_name'"
error_count=$((error_count + 1))
continue
fi
fi
done
echo ""
echo "totally $i files are downloaded!"
if [ $error_count -ne 0 ]; then
echo ""
echo "Encountered $error_count errors"
exit 1
fi
exit 0

456
centos-mirror-tools/dl_rpms.sh
View File

@ -1,456 +0,0 @@
#!/bin/bash
#
# SPDX-License-Identifier: Apache-2.0
#
# download RPMs/SRPMs from different sources.
# this script was originated by Brian Avery, and later updated by Yong Hu
# set -o errexit
# set -o nounset
# By default, we use "sudo" and we don't use a local yum.conf. These can
# be overridden via flags.
SUDO="sudo -E"
RELEASEVER="--releasever=7"
YUMCONFOPT=""
DL_RPMS_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
source $DL_RPMS_DIR/utils.sh
usage() {
echo "$0 [-n] [-c <yum.conf>] [-s|-S|-u|-U] [-x] <rpms_list> <match_level> "
echo ""
echo "Options:"
echo " -n: Do not use sudo when performing operations"
echo " -c: Use an alternate yum.conf rather than the system file"
echo " -x: Clean log files only, do not run."
echo " rpm_list: a list of RPM files to be downloaded."
echo " match_level: value could be L1, L2 or L3:"
echo " L1: use name, major version and minor version:"
echo " vim-7.4.160-2.el7 to search vim-7.4.160-2.el7.src.rpm"
echo " L2: use name and major version:"
echo " using vim-7.4.160 to search vim-7.4.160-2.el7.src.rpm"
echo " L3: use name:"
echo " using vim to search vim-7.4.160-2.el7.src.rpm"
echo " K1: Use Koji rather than yum repos as a source."
echo " Koji has a longer retention period than epel mirrors."
echo ""
echo " Download Source Options: Only select one of these."
echo " -s: Download from StarlingX mirror only"
echo " -S: Download from StarlingX mirror, upstream as backup (default)"
echo " -u: Download from original upstream sources only"
echo " -U: Download from original upstream sources, StarlingX mirror as backup"
echo ""
echo "Returns: 0 = All files downloaded successfully"
echo " 1 = Some files could not be downloaded"
echo " 2 = Bad arguements or other error"
echo ""
}
CLEAN_LOGS_ONLY=0
dl_rc=0
# Permitted values of dl_source
dl_from_stx_mirror="stx_mirror"
dl_from_upstream="upstream"
dl_from_stx_then_upstream="$dl_from_stx_mirror $dl_from_upstream"
dl_from_upstream_then_stx="$dl_from_upstream $dl_from_stx_mirror"
# Download from what source?
# dl_from_stx_mirror = StarlingX mirror only
# dl_from_upstream = Original upstream source only
# dl_from_stx_then_upstream = Either source, STX prefered (default)"
# dl_from_upstream_then_stx = Either source, UPSTREAM prefered"
dl_source="$dl_from_stx_then_upstream"
dl_flag=""
distro="centos"
MULTIPLE_DL_FLAG_ERROR_MSG="Error: Please use only one of: -s,-S,-u,-U"
multiple_dl_flag_check () {
if [ "$dl_flag" != "" ]; then
echo "$MULTIPLE_DL_FLAG_ERROR_MSG"
usage
exit 1
fi
}
# Parse option flags
while getopts "c:nxD:sSuUh" o; do
case "${o}" in
n)
# No-sudo
SUDO=""
;;
x)
# Clean only
CLEAN_LOGS_ONLY=1
;;
c)
# Use an alternate yum.conf
YUMCONFOPT="-c $OPTARG"
grep -q "releasever=" $OPTARG && RELEASEVER="--$(grep releasever= ${OPTARG})"
;;
D)
distro="${OPTARG}"
;;
s)
# Download from StarlingX mirror only. Do not use upstream sources.
multiple_dl_flag_check
dl_source="$dl_from_stx_mirror"
dl_flag="-s"
;;
S)
# Download from StarlingX mirror first, only use upstream source as a fallback.
multiple_dl_flag_check
dl_source="$dl_from_stx_then_upstream"
dl_flag="-S"
;;
u)
# Download from upstream only. Do not use StarlingX mirror.
multiple_dl_flag_check
dl_source="$dl_from_upstream"
dl_flag="-u"
;;
U)
# Download from upstream first, only use StarlingX mirror as a fallback.
multiple_dl_flag_check
dl_source="$dl_from_upstream_then_stx"
dl_flag="-U"
;;
h)
# Help
usage
exit 0
;;
*)
usage
exit 2
;;
esac
done
shift $((OPTIND-1))
if [ $# -lt 2 ]; then
usage
exit 2
fi
if [ "$1" == "" ]; then
echo "Need to supply the rpm file list"
exit 2;
else
rpms_list=$1
echo "using $rpms_list as the download name lists"
fi
match_level="L1"
if [ ! -z "$2" -a "$2" != " " ];then
match_level=$2
fi
timestamp=$(date +%F_%H%M)
echo $timestamp
export DL_MIRROR_LOG_DIR="${DL_MIRROR_LOG_DIR:-./logs}"
export DL_MIRROR_OUTPUT_DIR="${DL_MIRROR_OUTPUT_DIR:-./output/stx/CentOS/}"
MDIR_SRC="${DL_MIRROR_OUTPUT_DIR}/Source"
mkdir -p "$MDIR_SRC"
MDIR_BIN="${DL_MIRROR_OUTPUT_DIR}/Binary"
mkdir -p "$MDIR_BIN"
LOGSDIR="${DL_MIRROR_LOG_DIR}"
from=$(get_from $rpms_list)
LOG="$LOGSDIR/${match_level}_failmoved_url_${from}.log"
MISSING_SRPMS="$LOGSDIR/${match_level}_srpms_missing_${from}.log"
MISSING_RPMS="$LOGSDIR/${match_level}_rpms_missing_${from}.log"
FOUND_SRPMS="$LOGSDIR/${match_level}_srpms_found_${from}.log"
FOUND_RPMS="$LOGSDIR/${match_level}_rpms_found_${from}.log"
cat /dev/null > $LOG
cat /dev/null > $MISSING_SRPMS
cat /dev/null > $MISSING_RPMS
cat /dev/null > $FOUND_SRPMS
cat /dev/null > $FOUND_RPMS
if [ $CLEAN_LOGS_ONLY -eq 1 ];then
exit 0
fi
STOP_SCHEDULING=0
FOUND_ERRORS=0
MAX_WORKERS=8
workers=0
max_workers=$MAX_WORKERS
# An array that maps worker index to pid, or to two special values
# 'Idle' indicates no running thread.
# 'Busy' indicates the worker is allocated, but it's pid isn't known yet.
declare -A dl_env
#
# init_dl_env: Init the array that maps worker index to pid.
#
init_dl_env () {
local i=0
local stop
stop=$((max_workers-1))
for i in $(seq 0 $stop); do
dl_env[$i]='Idle'
done
}
#
# get_idle_dl_env: Find an idle worker, mark it allocated
# and return it's index.
get_idle_dl_env () {
local i=0
local stop
stop=$((max_workers-1))
if [ $stop -ge 255 ]; then
stop=254
fi
for i in $(seq 0 $stop); do
if [ ${dl_env[$i]} == 'Idle' ]; then
dl_env[$i]='Busy'
return $i
fi
done
return 255
}
#
# set_dl_env_pid: Set the pid of a previously allocated worker
#
set_dl_env_pid () {
local idx=$1
local val=$2
dl_env[$idx]=$val
}
#
# release_dl_env: Mark a worker as idle. Call after reaping the thread.
#
release_dl_env () {
local idx=$1
dl_env[$idx]='Idle'
}
#
# reaper: Look for worker threads that have exited.
# Check/log it's exit code, and release the worker.
# Return the number of threads reaped.
#
reaper () {
local reaped=0
local last_reaped=-1
local i=0
local stop
local p=0
local ret=0
stop=$((max_workers-1))
if [ $stop -ge 255 ]; then
stop=254
fi
while [ $reaped -gt $last_reaped ]; do
last_reaped=$reaped
for i in $(seq 0 $stop); do
p=${dl_env[$i]}
if [ "$p" == "Idle" ] || [ "$p" == "Busy" ]; then
continue
fi
# echo "test $i $p"
kill -0 $p &> /dev/null
if [ $? -ne 0 ]; then
wait $p
ret=$?
workers=$((workers-1))
reaped=$((reaped+1))
release_dl_env $i
if [ $ret -ne 0 ]; then
sleep 1
echo "ERROR: $FUNCNAME (${LINENO}): Failed to download in 'b$i'"
cat "$DL_MIRROR_LOG_DIR/$i" >> $DL_MIRROR_LOG_DIR/errors
echo "ERROR: $FUNCNAME (${LINENO}): Failed to download in 'b$i'" >> $DL_MIRROR_LOG_DIR/errors
echo "" >> $DL_MIRROR_LOG_DIR/errors
FOUND_ERRORS=1
fi
fi
done
done
return $reaped
}
#
# download_worker: Download one file.
# This is the entry point for a worker thread.
#
download_worker () {
local dl_idx=$1
local ff="$2"
local _level=$3
local rpm_name=""
local dest_dir=""
local rc=0
local dl_result=1
local lvl=""
local download_cmd=""
local download_url=""
local SFILE=""
local _arch=""
_arch=$(get_arch_from_rpm $ff)
rpm_name="$(get_rpm_name $ff)"
dest_dir="$(get_dest_directory $_arch)"
if [ ! -e $dest_dir/$rpm_name ]; then
for dl_src in $dl_source; do
case $dl_src in
$dl_from_stx_mirror)
lvl=$dl_from_stx_mirror
;;
$dl_from_upstream)
lvl=$_level
;;
*)
echo "Error: Unknown dl_source '$dl_src'"
continue
;;
esac
download_cmd="$(get_download_cmd $ff $lvl)"
echo "Looking for $rpm_name"
echo "--> run: $download_cmd"
if $download_cmd ; then
download_url="$(get_url $ff $lvl)"
SFILE="$(get_rpm_level_name $rpm_name $lvl)"
process_result "$_arch" "$dest_dir" "$download_url" "$SFILE"
dl_result=0
break
else
echo "Warning: $rpm_name not found"
SFILE="$(get_rpm_level_name $rpm_name $lvl)"
\rm -f "$SFILE"
fi
done
if [ $dl_result -eq 1 ]; then
echo "Error: $rpm_name not found"
echo "missing_srpm:$rpm_name" >> $LOG
echo $rpm_name >> $MISSING_SRPMS
rc=1
fi
else
echo "Already have $dest_dir/$rpm_name"
fi
return $rc
}
# Function to download different types of RPMs in different ways
download () {
local _file=$1
local _level=$2
local _list=""
local _from=""
local _arch=""
FOUND_ERRORS=0
_list=$(cat $_file)
_from=$(get_from $_file)
echo "now the rpm will come from: $_from"
for ff in $_list; do
# Free up a worker if none available
while [ $workers -ge $max_workers ]; do
reaper
reaped=$?
if [ $reaped -eq 0 ]; then
sleep 0.1
fi
done
# Allocate a worker. b=the worker index
workers=$((workers+1))
get_idle_dl_env
b=$?
if [ $b -ge 255 ]; then
echo "get_idle_dl_env failed to find a free slot"
exit 1
fi
PREFIX="b$b"
# Launch a thread in the background
( download_worker $b $ff $_level 2>&1 | sed "s#^#${PREFIX}: #" | tee $DL_MIRROR_LOG_DIR/$b; exit ${PIPESTATUS[0]} ) &
# Record the pid of background process
pp=$!
set_dl_env_pid $b $pp
done
# Wait for remaining workers to exit
while [ $workers -gt 0 ]; do
reaper
reaped=$?
if [ $reaped -eq 0 ]; then
sleep 0.1
fi
done
return $FOUND_ERRORS
}
# Init the pool of worker threads
init_dl_env
# Prime the cache
loop_count=0
max_loop_count=5
echo "${SUDO} yum ${YUMCONFOPT} ${RELEASEVER} makecache"
while ! ${SUDO} yum ${YUMCONFOPT} ${RELEASEVER} makecache fast ; do
# To protect against intermittent 404 errors, we'll retry
# a few times. The suspected issue is pulling repodata
# from multiple source that are temporarily inconsistent.
loop_count=$((loop_count + 1))
if [ $loop_count -gt $max_loop_count ]; then
break
fi
echo "makecache retry: $loop_count"
# Wipe the inconsistent data from the last try
echo "yum ${YUMCONFOPT} ${RELEASEVER} clean all"
yum ${YUMCONFOPT} ${RELEASEVER} clean all
done
# Download files
if [ -s "$rpms_list" ];then
echo "--> start searching $rpms_list"
download $rpms_list $match_level
if [ $? -ne 0 ]; then
dl_rc=1
fi
fi
echo "Done!"
exit $dl_rc

179
centos-mirror-tools/dl_rpms_from_url.sh
View File

@ -1,179 +0,0 @@
#!/bin/bash -e
#
# SPDX-License-Identifier: Apache-2.0
#
# download RPMs/SRPMs from a base url.
# this script was originated by Scott Little
set -o errexit
set -o nounset
# By default, we use "sudo" and we don't use a local yum.conf. These can
# be overridden via flags.
DL_RPMS_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
source $DL_RPMS_DIR/utils.sh
BASE_URL=""
usage() {
echo "$0 -u <base url> <rpms_list> "
echo ""
echo "Options:"
echo " -u: Use provided base url"
echo ""
echo "Returns: 0 = All files downloaded successfully"
echo " 1 = Some files could not be downloaded"
echo " 2 = Bad arguements or other error"
echo ""
}
CLEAN_LOGS_ONLY=0
dl_rc=0
distro="centos"
# Parse option flags
while getopts "u:h" o; do
case "${o}" in
u)
# Use an alternate yum.conf
BASE_URL="$OPTARG"
;;
h)
# Help
usage
exit 0
;;
*)
usage
exit 2
;;
esac
done
shift $((OPTIND-1))
if [ $# -lt 1 ]; then
usage
exit 2
fi
if [ "$1" == "" ]; then
echo "Need to supply the rpm file list"
exit 2;
else
rpms_list=$1
echo "using $rpms_list as the download name lists"
fi
if [ ! -f "${rpms_list}" ]; then
echo "Error: File not found: ${rpms_list}"
usage
exit 2
fi
timestamp=$(date +%F_%H%M)
echo $timestamp
export DL_MIRROR_LOG_DIR="${DL_MIRROR_LOG_DIR:-./logs}"
export DL_MIRROR_OUTPUT_DIR="${DL_MIRROR_OUTPUT_DIR:-./output/stx/CentOS}"
MDIR_SRC="${DL_MIRROR_OUTPUT_DIR}/Source"
mkdir -p "$MDIR_SRC"
MDIR_BIN="${DL_MIRROR_OUTPUT_DIR}/Binary"
mkdir -p "$MDIR_BIN"
LOGSDIR="${DL_MIRROR_LOG_DIR}"
from=$(get_from $rpms_list)
LOG="$LOGSDIR/L1_failmoved_url_${from}.log"
MISSING_SRPMS="$LOGSDIR/srpms_missing_${from}.log"
MISSING_RPMS="$LOGSDIR/rpms_missing_${from}.log"
FOUND_SRPMS="$LOGSDIR/srpms_found_${from}.log"
FOUND_RPMS="$LOGSDIR/rpms_found_${from}.log"
cat /dev/null > $LOG
cat /dev/null > $MISSING_SRPMS
cat /dev/null > $MISSING_RPMS
cat /dev/null > $FOUND_SRPMS
cat /dev/null > $FOUND_RPMS
if [ $CLEAN_LOGS_ONLY -eq 1 ];then
exit 0
fi
if [ "$BASE_URL" == "" ]; then
BASE_URL=file://$(readlink -f $(dirname ${rpms_list}))
fi
# Function to download different types of RPMs in different ways
download () {
local _file=$1
local _url=$2
local _list=""
local _from=""
local _arch=""
local rc=0
local download_cmd=""
local download_url=""
local rpm_name=""
local SFILE=""
local lvl
local dl_result
_list=$(cat $_file)
_from=$(get_from $_file)
echo "now the rpm will come from: $_from"
for ff in $_list; do
_arch=$(get_arch_from_rpm $ff)
rpm_name="$(get_rpm_name $ff)"
dest_dir="$(get_dest_directory $_arch)"
if [ ! -e $dest_dir/$rpm_name ]; then
dl_result=1
download_url="$_url/$rpm_name"
download_cmd="curl --silent --output $rpm_name ${download_url}"
echo "Looking for $rpm_name"
echo "--> run: $download_cmd"
if $download_cmd ; then
SFILE="$(get_rpm_level_name $rpm_name L1)"
process_result "$_arch" "$dest_dir" "$download_url" "$SFILE"
dl_result=0
else
echo "Warning: $rpm_name not found"
fi
if [ $dl_result -eq 1 ]; then
echo "Error: $rpm_name not found"
echo "missing_srpm:$rpm_name" >> $LOG
echo $rpm_name >> $MISSING_SRPMS
rc=1
fi
else
echo "Already have $dest_dir/$rpm_name"
fi
echo
done
return $rc
}
# Download files
if [ -s "$rpms_list" ];then
echo "--> start searching $rpms_list"
download $rpms_list $BASE_URL
if [ $? -ne 0 ]; then
dl_rc=1
fi
fi
echo "Done!"
exit $dl_rc

630
centos-mirror-tools/dl_tarball.sh
View File

@ -1,630 +0,0 @@
#!/usr/bin/env bash
#
# SPDX-License-Identifier: Apache-2.0
#
# Copyright (C) 2019 Intel Corporation
#
# The build of StarlingX relies, besides RPM Binaries and Sources, in this
# repository which is a collection of packages in the form of Tar Compressed
# files and 3 RPMs obtained from a Tar Compressed file. This script and a text
# file containing a list of packages enable their download and the creation
# of the repository based in common and specific requirements dictated
# by the StarlingX building system recipes.
# input files:
# The file tarball-dl.lst contains the list of packages and artifacts for
# building this sub-mirror.
tarball_file=""
set -x
DL_TARBALL_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
source $DL_TARBALL_DIR/url_utils.sh
source $DL_TARBALL_DIR/utils.sh
usage () {
echo "$0 [-D <distro>] [-s|-S|-u|-U] [-h] <path_to_tarball_dl.lst>"
}
# Permitted values of dl_source
dl_from_stx_mirror="stx_mirror"
dl_from_upstream="upstream"
dl_from_stx_then_upstream="$dl_from_stx_mirror $dl_from_upstream"
dl_from_upstream_then_stx="$dl_from_upstream $dl_from_stx_mirror"
# Download from what source?
# dl_from_stx_mirror = StarlingX mirror only
# dl_from_upstream = Original upstream source only
# dl_from_stx_then_upstream = Either source, STX prefered (default)"
# dl_from_upstream_then_stx = Either source, UPSTREAM prefered"
dl_source="$dl_from_stx_then_upstream"
dl_flag=""
distro="centos"
MULTIPLE_DL_FLAG_ERROR_MSG="Error: Please use only one of: -s,-S,-u,-U"
multiple_dl_flag_check () {
if [ "$dl_flag" != "" ]; then
echo "$MULTIPLE_DL_FLAG_ERROR_MSG"
usage
exit 1
fi
}
# Parse out optional arguments
while getopts "D:hsSuU" o; do
case "${o}" in
D)
distro="${OPTARG}"
;;
s)
# Download from StarlingX mirror only. Do not use upstream sources.
multiple_dl_flag_check
dl_source="$dl_from_stx_mirror"
dl_flag="-s"
;;
S)
# Download from StarlingX mirror only. Do not use upstream sources.
multiple_dl_flag_check
dl_source="$dl_from_stx_then_upstream"
dl_flag="-S"
;;
u)
# Download from upstream only. Do not use StarlingX mirror.
multiple_dl_flag_check
dl_source="$dl_from_upstream"
dl_flag="-u"
;;
U)
# Download from upstream only. Do not use StarlingX mirror.
multiple_dl_flag_check
dl_source="$dl_from_upstream_then_stx"
dl_flag="-U"
;;
h)
# Help
usage
exit 0
;;
*)
usage
exit 1
;;
esac
done
shift $((OPTIND-1))
tarball_file="${1}"
shift
if [ ! -e $tarball_file ]; then
echo "$tarball_file does not exist, please have a check!"
exit -1
fi
# The 2 categories we can divide the list of packages in the output directory:
# - General hosted under "downloads" output directory.
# - Puppet hosted under "downloads/puppet" output directory.
# to be populated under $MY_REPO/downloads/puppet
export DL_MIRROR_LOG_DIR="${DL_MIRROR_LOG_DIR:-./logs}"
export DL_MIRROR_OUTPUT_DIR="${DL_MIRROR_OUTPUT_DIR:-./output/stx/CentOS}"
logs_dir="${DL_MIRROR_LOG_DIR}"
output_log="$logs_dir/log_download_tarball_missing.txt"
output_path="${DL_MIRROR_OUTPUT_DIR}"
output_tarball=$output_path/downloads
output_puppet=$output_tarball/puppet
mkdir -p $output_tarball
mkdir -p $output_puppet
if [ ! -d "$logs_dir" ]; then
mkdir "$logs_dir"
fi
cat /dev/null > $output_log
is_tarball() {
local tarball_name="$1"
local mime_type
local types=("gzip" "x-bzip2" "x-rpm" "x-xz" "x-gzip" "x-tar")
local FOUND=1
mime_type=$(file --mime-type -b $tarball_name | cut -d "/" -f 2)
for t in "${types[@]}"; do
if [ "$mime_type" == "$t" ]; then
FOUND=0
break;
fi
done
return $FOUND
}
# Download function using curl or similar command
download_package() {
local tarball_name="$1"
local upstream_url="$2"
local stx_url=""
local url=""
local rc=1
stx_url="$(url_to_stx_mirror_url "$upstream_url" "$distro")"
for dl_src in $dl_source; do
case $dl_src in
$dl_from_stx_mirror)
url="$stx_url"
;;
$dl_from_upstream)
url="$upstream_url"
;;
*)
echo "Error: Unknown dl_source '$dl_src'"
continue
;;
esac
url_exists "$url"
if [ $? != 0 ]; then
echo "Warning: '$url' is broken"
else
download_file --quiet "$url" "$tarball_name"
if [ $? -eq 0 ]; then
if is_tarball "$tarball_name"; then
echo "Ok: $download_path"
rc=0
break
else
echo "Warning: File from '$url' is not a tarball"
\rm "$tarball_name"
rc=1
fi
else
echo "Warning: failed to download '$url'"
continue
fi
fi
done
if [ $rc != 0 ]; then
echo "Error: failed to download '$upstream_url'"
echo "$upstream_url" > "$output_log"
fi
return $rc
}
# This script will iterate over the tarball.lst text file and execute specific
# tasks based on the name of the package:
error_count=0;
for line in $(cat $tarball_file); do
# A line from the text file starting with "#" character is ignored
if [[ "$line" =~ ^'#' ]]; then
echo "Skip $line"
continue
fi
# The text file contains 3 columns separated by a character "#"
# - Column 1, name of package including extensions as it is referenced
# by the build system recipe, character "!" at the beginning of the name package
# denotes special handling is required tarball_name=`echo $line | cut -d"#" -f1-1`
# - Column 2, name of the directory path after it is decompressed as it is
# referenced in the build system recipe.
# - Column 3, the URL for the file or git to download
# - Column 4, download method, one of
# http - download a simple file
# http_filelist - download multiple files by appending a list of subpaths
# to the base url. Tar up the lot.
# http_script - download a simple file, run script whos output is a tarball
# git - download a git, checkout branch and tar it up
# git_script - download a git, checkout branch, run script whos output is a tarball
#
# - Column 5, utility field
# If method is git or git_script, this is a branch,tag,sha we need to checkout
# If method is http_filelist, this is the path to a file containing subpaths.
# Subpaths are appended to the urls and downloaded.
# Otherwise unused
# - Column 6, Path to script.
# Not yet supported.
# Intent is to run this script to produce the final tarball, replacing
# all the special case code currently embedded in this script.
tarball_name=$(echo $line | cut -d"#" -f1-1)
directory_name=$(echo $line | cut -d"#" -f2-2)
tarball_url=$(echo $line | cut -d"#" -f3-3)
method=$(echo $line | cut -d"#" -f4-4)
util=$(echo $line | cut -d"#" -f5-5)
script=$(echo $line | cut -d"#" -f6-6)
# Remove leading '!' if present
tarball_name="${tarball_name//!/}"
# - For the General category and the Puppet category:
# - Packages have a common process: download, decompressed,
# change the directory path and compressed.
if [[ "$line" =~ ^pupp* ]]; then
download_path=$output_puppet/$tarball_name
download_directory=$output_puppet
else
download_path=$output_tarball/$tarball_name
download_directory=$output_tarball
fi
if [ -e $download_path ]; then
echo "Already have $download_path"
continue
fi
# We have 6 packages from the text file starting with the character "!":
# they require special handling besides the common process: remove directory,
# remove text from some files, clone a git repository, etc.
if [[ "$line" =~ ^'!' ]]; then
echo $tarball_name
pushd $output_tarball > /dev/null
if [ "$tarball_name" = "mariadb-10.1.28.tar.gz" ]; then
download_package "$tarball_name" "$tarball_url"
if [ $? -ne 0 ]; then
error_count=$((error_count + 1))
popd > /dev/null # pushd $output_tarball
continue
fi
mkdir $directory_name
tar xf $tarball_name --strip-components 1 -C $directory_name
rm $tarball_name
pushd $directory_name > /dev/null
rm -rf storage/tokudb
rm ./man/tokuft_logdump.1 ./man/tokuftdump.1
sed -e s/tokuft_logdump.1//g -i man/CMakeLists.txt
sed -e s/tokuftdump.1//g -i man/CMakeLists.txt
popd > /dev/null
tar czvf $tarball_name $directory_name
rm -rf $directory_name
popd > /dev/null # pushd $directory_name
elif [[ "$tarball_name" = 'chartmuseum-v0.12.0-amd64' ]]; then
download_file --quiet "$tarball_url" "$tarball_name"
if [ $? -ne 0 ]; then
error_count=$((error_count + 1))
popd > /dev/null # pushd $output_tarball
continue
fi
elif [[ "$tarball_name" = "helm-2to3-0.10.0.tar.gz" ]]; then
download_file --quiet "$tarball_url" "$tarball_name"
if [ $? -ne 0 ]; then
error_count=$((error_count + 1))
popd > /dev/null # pushd $output_tarball
continue
fi
elif [[ "$tarball_name" = "helm-mapkubeapis_0.3.0.tar.gz" ]]; then
download_file --quiet "$tarball_url" "$tarball_name"
if [ $? -ne 0 ]; then
error_count=$((error_count + 1))
popd > /dev/null # pushd $output_tarball
continue
fi
elif [[ "$tarball_name" = 'OPAE_1.3.7-5_el7.zip' ]]; then
srpm_path="${directory_name}/source_code/"
download_file --quiet "$tarball_url" "$tarball_name"
if [ $? -ne 0 ]; then
error_count=$((error_count + 1))
popd > /dev/null # pushd $output_tarball
continue
fi
unzip "$tarball_name"
cp "${srpm_path}/opae-intel-fpga-driver-2.0.1-10.src.rpm" .
# Don't delete the original OPAE_1.3.7-5_el7.zip tarball.
# We don't use it, but it will prevent re-downloading this file.
# rm -f "$tarball_name"
rm -rf "$directory_name"
elif [[ "${tarball_name}" = 'ice_comms-1.3.35.0.zip' ]]; then
download_file --quiet "${tarball_url}" "${tarball_name}"
if [ $? -ne 0 ]; then
echo "Warning: failed to download '${tarball_url}'"
error_count=$((error_count + 1))
popd > /dev/null # pushd $output_tarball
continue
fi
elif [[ "$tarball_name" = 'MLNX_OFED_SRC-5.5-1.0.3.2.tgz' ]]; then
srpm_path="${directory_name}/SRPMS/"
download_package "$tarball_name" "$tarball_url"
if [ $? -ne 0 ]; then
error_count=$((error_count + 1))
popd > /dev/null # pushd $output_tarball
continue
fi
tar -xf "$tarball_name"
cp "${srpm_path}/mlnx-ofa_kernel-5.5-OFED.5.5.1.0.3.1.src.rpm" .
cp "${srpm_path}/rdma-core-55mlnx37-1.55103.src.rpm" .
cp "${srpm_path}/mlnx-tools-5.2.0-0.55103.src.rpm" .
cp "${srpm_path}/mstflint-4.16.0-1.55103.src.rpm" .
# Don't delete the original MLNX_OFED_LINUX tarball.
# We don't use it, but it will prevent re-downloading this file.
# rm -f "$tarball_name"
rm -rf "$directory_name"
elif [ "$tarball_name" = "qat1.7.l.4.5.0-00034.tar.gz" ]; then
download_package "$tarball_name" "$tarball_url"
if [ $? -ne 0 ]; then
error_count=$((error_count + 1))
popd > /dev/null # pushd $output_tarball
continue
fi
elif [ "$tarball_name" = "QAT1.7.L.4.14.0-00031.tar.gz" ]; then
download_package "$tarball_name" "$tarball_url"
if [ $? -ne 0 ]; then
error_count=$((error_count + 1))
popd > /dev/null # pushd $output_tarball
continue
fi
elif [ "$tarball_name" = "dpdk-kmods-2a9f0f72a2d926382634cf8f1de10e1acf57542b.tar.gz" ]; then
dest_dir=dpdk-kmods
git clone $tarball_url $dest_dir
if [ ! -d $dest_dir ]; then
echo "Error: Failed to git clone from '$tarball_url'"
echo "$tarball_url" > "$output_log"
error_count=$((error_count + 1))
popd > /dev/null # pushd $output_tarball
continue
fi
pushd $dest_dir > /dev/null
rev=$util
git checkout -b temp $rev
rm -rf .git
popd > /dev/null
mv dpdk-kmods $directory_name
tar czvf $tarball_name $directory_name
rm -rf $directory_name
elif [ "$tarball_name" = "tss2-930.tar.gz" ]; then
dest_dir=ibmtpm20tss-tss
for dl_src in $dl_source; do
case $dl_src in
$dl_from_stx_mirror)
url="$(url_to_stx_mirror_url "$tarball_url" "$distro")"
;;
$dl_from_upstream)
url="$tarball_url"
;;
*)
echo "Error: Unknown dl_source '$dl_src'"
continue
;;
esac
git clone $url $dest_dir
if [ $? -eq 0 ]; then
# Success
break
else
echo "Warning: Failed to git clone from '$url'"
continue
fi
done
if [ ! -d $dest_dir ]; then
echo "Error: Failed to git clone from '$tarball_url'"
echo "$tarball_url" > "$output_log"
error_count=$((error_count + 1))
popd > /dev/null # pushd $output_tarball
continue
fi
pushd $dest_dir > /dev/null
branch=$util
git checkout $branch
rm -rf .git
popd > /dev/null
mv ibmtpm20tss-tss $directory_name
tar czvf $tarball_name $directory_name
rm -rf $directory_name
popd > /dev/null # pushd $dest_dir
elif [[ "$tarball_name" =~ ^kernel-rt-.*[.]el.*[.]rpm ]]; then
local el_release=""
el_release=$(echo $tarball_name | rev | cut -d '.' -f 3 | rev)
local extra_clone_args=""
if [[ "$el_release" =~ ^el([0-9]*)[0-9_]*$ ]]; then
extra_clone_args="-b c${BASH_REMATCH[1]} --single-branch"
else
echo "error: $tarball_name is not a valid EPEL kernel"
error_count=$((error_count + 1))
continue
fi
if ! (git clone $extra_clone_args $tarball_url || \
git clone $tarball_url ); then
echo "error: failed to clone from $tarball_url"
error_count=$((error_count + 1))
continue
fi
pushd kernel-rt
(
rev=$util
if ! git checkout $rev; then
echo "failed to checkout $rev from $tarball_url"
exit 1
fi
# get the CentOS tools for building SRPMs
if ! git clone https://git.centos.org/centos-git-common; then
echo "error: failed to clone https://git.centos.org/centos-git-common"
exit 1
fi
chmod +x centos-git-common/get_sources.sh
# Create the SRPM using CentOS tools
# bracketed to contain the PATH change
if ! (PATH=$PATH:./centos-git-common into_srpm.sh -d .$el_release); then
echo "error: into_srpm.sh failed to build $tarball_name"
exit 1
fi
mv SRPMS/*.rpm ../${tarball_name}
) || error_count=$((error_count + 1))
popd > /dev/null # pushd kernel-rt
# Cleanup
rm -rf kernel-rt
elif [[ "$tarball_name" =~ ^rt-setup-*.*.rpm ]]; then
git clone -b c8 --single-branch $tarball_url
pushd rt-setup
rev=$util
git checkout -b spec $rev
# get the CentOS tools for building SRPMs
git clone https://git.centos.org/centos-git-common
chmod +x centos-git-common/get_sources.sh
# Create the SRPM using CentOS tools
# bracketed to contain the PATH change
(PATH=$PATH:./centos-git-common into_srpm.sh -d .el8)
mv SRPMS/*.rpm ..
popd > /dev/null # pushd rt-setup
# Cleanup
rm -rf rt-setup
elif [[ "$tarball_name" = "kdump-anaconda-addon-003-29-g4c517c5.tar.gz" ]]; then
mkdir -p "$directory_name"
pushd "$directory_name"
src_rpm_name="$(echo "$tarball_url" | rev | cut -d/ -f1 | rev)"
download_file --quiet "$tarball_url" "$src_rpm_name"
if [ $? -eq 0 ]; then
rpm2cpio "$src_rpm_name" | cpio --quiet -i "$tarball_name"
mv "$tarball_name" ..
else
echo "Error: Failed to download '$tarball_url'"
echo "$tarball_url" > "$output_log"
error_count=$((error_count + 1))
fi
popd >/dev/null # pushd "$directory_name"
rm -rf "$directory_name"
elif [ "${tarball_name}" = "bcm_220.0.83.0.tar.gz" ]; then
# "${util}" is the expected sha256sum of the downloaded tar archive.
#
# Check if the file is already downloaded and if its sha256sum is
# correct.
if [ -f "${tarball_name}" ] && \
! check_sha256sum "${tarball_name}" "${util}"; then
# Incorrect checksum. Maybe the previous download attempt
# failed? Remove the file and attempt to re-download.
rm -f "${tarball_name}"
fi
if ! [ -f "${tarball_name}" ]; then
download_file --quiet "${tarball_url}" "${tarball_name}"
if [ $? -ne 0 ]; then
echo "Warning: failed to download '${tarball_url}'"
error_count=$((error_count + 1))
popd > /dev/null # pushd $output_tarball
continue
fi
if ! check_sha256sum "${tarball_name}" "${util}"; then
echo "Warning: incorrect sha256sum for '${tarball_url}'"
error_count=$((error_count + 1))
popd > /dev/null # pushd $output_tarball
continue
fi
fi
rm -rf "${directory_name}"
if ! tar -xf "${tarball_name}" || \
! cp "${directory_name}/Linux/Linux_Driver/netxtreme-bnxt_en-1.10.2-220.0.13.0.tar.gz" . || \
! cp "${directory_name}/Linux/KMP-RoCE-Lib/KMP/Redhat/rhel7.9/libbnxt_re-220.0.5.0-rhel7u9.src.rpm" . ; then
# Extraction failed. Remove the tar archive to allow another
# attempt.
rm -f "${tarball_name}"
echo "Warning: Could not extract '${tarball_name}' or could not find expected files."
error_count=$((error_count + 1))
fi
rm -rf "${directory_name}"
# We do not delete the original tar archive we just extracted from,
# so that it will not need to be downloaded again.
# rm -f "${tarball_name}"
fi
popd > /dev/null # pushd $output_tarball
continue
fi
if [ -e $download_path ]; then
echo "Already have $download_path"
continue
fi
for dl_src in $dl_source; do
case $dl_src in
$dl_from_stx_mirror)
url="$(url_to_stx_mirror_url "$tarball_url" "$distro")"
;;
$dl_from_upstream)
url="$tarball_url"
;;
*)
echo "Error: Unknown dl_source '$dl_src'"
continue
;;
esac
download_file --quiet "$url" "$download_path"
if [[ $? -eq 0 ]] ; then
if ! is_tarball "$download_path"; then
echo "Warning: file from $url is not a tarball."
\rm "$download_path"
continue
fi
echo "Ok: $download_path"
pushd $download_directory > /dev/null
directory_name_original=$(tar -tf $tarball_name | head -1 | cut -f1 -d"/")
if [ "$directory_name" != "$directory_name_original" ]; then
mkdir -p $directory_name
tar xf $tarball_name --strip-components 1 -C $directory_name
tar -czf $tarball_name $directory_name
rm -r $directory_name
fi
popd > /dev/null
break
else
echo "Warning: Failed to download $url" 1>&2
continue
fi
done
if [ ! -e $download_path ]; then
echo "Error: Failed to download $tarball_url" 1>&2
echo "$tarball_url" > "$output_log"
error_count=$((error_count + 1))
fi
done
# End of file
if [ $error_count -ne 0 ]; then
echo ""
echo "Encountered $error_count errors"
exit 1
fi
exit 0

739
centos-mirror-tools/download_mirror.sh
View File

@ -1,739 +0,0 @@
#!/bin/bash
#
# SPDX-License-Identifier: Apache-2.0
#
DOWNLOAD_MIRROR_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
source $DOWNLOAD_MIRROR_DIR/../toCOPY/lst_utils.sh
export DL_MIRROR_LOG_DIR="${DL_MIRROR_LOG_DIR:-./logs}"
export DL_MIRROR_OUTPUT_DIR="${DL_MIRROR_OUTPUT_DIR:-./output/stx/CentOS}"
cleanup () {
if [ -e "${TMP_LST_DIR}" ]; then
\rm -rf ${TMP_LST_DIR}
fi
}
trap "cleanup ; exit 1" INT HUP TERM QUIT
trap "cleanup" EXIT
# Clear the error log before we begin
if [ -f $DL_MIRROR_LOG_DIR/errors ]; then
rm -f $DL_MIRROR_LOG_DIR/errors
fi
# A temporary compatability step to save download time
# during the shift to the new DL_MIRROR_OUTPUT_DIR location.
#
# Relocate downloaded rpms from the old location to the new.
pike_dir="./output/stx-r1/CentOS/pike"
if [ -d $pike_dir ] && [ ! -d $DL_MIRROR_OUTPUT_DIR ]; then
mkdir -p $(dirname $DL_MIRROR_OUTPUT_DIR)
mv $pike_dir $DL_MIRROR_OUTPUT_DIR
\rm -rf ./output/stx-r1
fi
usage() {
echo "$0 [options]"
echo
echo "Common Options:"
echo " -c <yum.conf>: Use an alternate yum.conf rather than the system file"
echo " Suggested valur is 'yum.conf.sample' in this directory."
echo " (option passed on to subscripts when appropriate)"
echo " -d <distro>: Download package to build designated distro. Default 'centos'"
echo " -g: Do not change group IDs of downloaded artifacts"
echo " -l <layer>: Download only packages required to build a given layer."
echo " Default: use the LAYER environmnet variable, or 'all'."
echo " -n: Do not use sudo when performing operations."
echo " (option passed on to subscripts when appropriate)"
echo
echo "Download Source Options: Only select one of these."
echo " -s: Download from StarlingX mirror only"
echo " -S: Download from StarlingX mirror, upstream as backup (default)"
echo " -u: Download from original upstream sources only"
echo " -U: Download from original upstream sources, StarlingX mirror as backup"
echo
echo "Layered Build Options: For use when building multiple layers locally."
echo " -C <config_dir>: Use an alternate config directory rather than the system"
echo " defined one"
echo " -I <lower_layer>,<build_type>,<url>:"
echo " Override the url for the image include file of a lower"
echo " layer's build type. Normally the url(s) is read from"
echo " <config_dir>/<distro>/<layer>/required_layer_iso_inc.cfg"
echo " This option can be used more than once."
echo " -L <lower_layer>,<build_type>,<url>:"
echo " Override the url for the package list of a lower"
echo " layer's build type. Normally the url(s) is read from"
echo " <config_dir>/<distro>/<layer>/required_layer_pkgs.cfg."
echo " This option can be used more than once."
echo " -W <lower_layer>,<stream>,<url>:"
echo " Override the url for the wheels.inc list of a lower"
echo " layer's build type. Normally the url(s) is read from"
echo " <config_dir>/<distro>/<layer>/required_layer_wheel_inc.cfg."
echo " This option can be used more than once."
echo
}
generate_log_name() {
filename=$1
level=$2
base=$(basename $filename .lst)
echo $LOGSDIR"/"$base"_download_"$level".log"
}
need_file(){
for f in $*; do
if [ ! -f $f ]; then
echo "ERROR: File $f does not exist."
exit 1
fi
done
}
make_if_needed_file(){
for f in $*; do
if [ ! -f $f ]; then
echo "Creating empty file '$f'"
touch $f
fi
done
}
need_dir(){
for d in $*; do
if [ ! -d $d ]; then
echo "ERROR: Directory $d does not exist."
exit 1
fi
done
}
# Downloader scripts
rpm_downloader="${DOWNLOAD_MIRROR_DIR}/dl_rpms.sh"
lower_layer_rpm_downloader="${DOWNLOAD_MIRROR_DIR}/dl_lower_layer_rpms.sh"
rpm_from_url_downloader="${DOWNLOAD_MIRROR_DIR}/dl_rpms_from_url.sh"
tarball_downloader="${DOWNLOAD_MIRROR_DIR}/dl_tarball.sh"
other_downloader="${DOWNLOAD_MIRROR_DIR}/dl_other_from_centos_repo.sh"
make_stx_mirror_yum_conf="${DOWNLOAD_MIRROR_DIR}/make_stx_mirror_yum_conf.sh"
# track optional arguments
change_group_ids=1
use_system_yum_conf=0
alternate_yum_conf="${DOWNLOAD_MIRROR_DIR}/yum.conf.sample"
alternate_repo_dir=""
rpm_downloader_extra_args=""
tarball_downloader_extra_args=""
make_stx_mirror_yum_conf_extra_args=""
# lst files to use as input
rpms_from_3rd_parties_template="rpms_3rdparties.lst"
rpms_from_centos_repo_template="rpms_centos.lst"
rpms_from_centos_3rd_parties_template="rpms_centos3rdparties.lst"
rpms_from_layer_build_dir=${DL_MIRROR_OUTPUT_DIR}/layer_pkg_lists
rpms_from_layer_repos_dir=${DL_MIRROR_OUTPUT_DIR}/layer_repos
image_inc_from_layer_build_dir=${DL_MIRROR_OUTPUT_DIR}/layer_image_inc
wheels_inc_from_layer_build_dir=${DL_MIRROR_OUTPUT_DIR}/layer_wheels_inc
build_info_from_layer_build_dir=${DL_MIRROR_OUTPUT_DIR}/layer_build_info
tarball_downloads_template="tarball-dl.lst"
other_downloads_template="other_downloads.lst"
# Overall success
success=1
SUDO=sudo
# Permitted values of dl_source
dl_from_stx_mirror="stx_mirror"
dl_from_upstream="upstream"
dl_from_stx_then_upstream="$dl_from_stx_mirror $dl_from_upstream"
dl_from_upstream_then_stx="$dl_from_upstream $dl_from_stx_mirror"
# Download from what source?
# dl_from_stx_mirror = StarlingX mirror only
# dl_from_upstream = Original upstream source only
# dl_from_stx_then_upstream = Either source, STX prefered (default)"
# dl_from_upstream_then_stx = Either source, UPSTREAM prefered"
dl_source="$dl_from_stx_then_upstream"
dl_flag=""
dl_from_stx () {
local re="\\b$dl_from_stx_mirror\\b"
[[ "$dl_source" =~ $re ]]
}
dl_from_upstream () {
local re="\\b$dl_from_upstream\\b"
[[ "$dl_source" =~ $re ]]
}
MULTIPLE_DL_FLAG_ERROR_MSG="Error: Please use only one of: -s,-S,-u,-U"
TEMP_DIR=""
TEMP_DIR_CLEANUP=""
multiple_dl_flag_check () {
if [ "$dl_flag" != "" ]; then
echo "$MULTIPLE_DL_FLAG_ERROR_MSG"
usage
exit 1
fi
}
# Parse out optional arguments
while getopts "c:Cd:ghI:sl:L:nt:ySuUW:" o; do
case "${o}" in
c)
# Pass -c ("use alternate yum.conf") to rpm downloader
use_system_yum_conf=0
alternate_yum_conf="${OPTARG}"
;;
C)
# Alternate config directory
set_and_validate_config_dir "${OPTARG}"
;;
d)
# Alternate distro
set_and_validate_distro "${OPTARG}"
;;
g)
# Do not attempt to change group IDs on downloaded packages
change_group_ids=0
;;
I)
set_layer_image_inc_urls "${OPTARG}"
;;
W)
set_layer_wheels_inc_urls "${OPTARG}"
;;
l)
# layer
set_and_validate_layer "${OPTARG}"
;;
L)
set_layer_pkg_urls "${OPTARG}"
;;
n)
# Pass -n ("no-sudo") to rpm downloader
rpm_downloader_extra_args="${rpm_downloader_extra_args} -n"
SUDO=""
;;
t)
# Set TEMP_DIR
TEMP_DIR="${OPTARG}"
;;
y)
# Use hosts /etc/yum.conf
use_system_yum_conf=1
alternate_yum_conf=""
;;
s)
# Download from StarlingX mirror only. Do not use upstream sources.
multiple_dl_flag_check
dl_source="$dl_from_stx_mirror"
dl_flag="-s"
;;
S)
# Download from StarlingX mirror first, only use upstream source as a fallback.
multiple_dl_flag_check
dl_source="$dl_from_stx_then_upstream"
dl_flag="-S"
;;
u)
# Download from upstream only. Do not use StarlingX mirror.
multiple_dl_flag_check
dl_source="$dl_from_upstream"
dl_flag="-u"
;;
U)
# Download from upstream first, only use StarlingX mirror as a fallback.
multiple_dl_flag_check
dl_source="$dl_from_upstream_then_stx"
dl_flag="-U"
;;
h)
# Help
usage
exit 0
;;
*)
usage
exit 1
;;
esac
done
shift $((OPTIND-1))
TMP_LST_DIR=$(mktemp -d /tmp/tmp_lst_dir_XXXXXX)
mkdir -p $TMP_LST_DIR
rpms_from_3rd_parties="$TMP_LST_DIR/${rpms_from_3rd_parties_template}"
rpms_from_centos_repo="$TMP_LST_DIR/${rpms_from_centos_repo_template}"
rpms_from_centos_3rd_parties="$TMP_LST_DIR/${rpms_from_centos_3rd_parties_template}"
tarball_downloads="$TMP_LST_DIR/${tarball_downloads_template}"
other_downloads="$TMP_LST_DIR/${other_downloads_template}"
merge_lst ${config_dir} ${distro} ${rpms_from_3rd_parties_template} > ${rpms_from_3rd_parties}
merge_lst ${config_dir} ${distro} ${rpms_from_centos_repo_template} > ${rpms_from_centos_repo}
merge_lst ${config_dir} ${distro} ${rpms_from_centos_3rd_parties_template} > ${rpms_from_centos_3rd_parties}
merge_lst ${config_dir} ${distro} ${tarball_downloads_template} > ${tarball_downloads}
merge_lst ${config_dir} ${distro} ${other_downloads_template} > ${other_downloads}
echo "--------------------------------------------------------------"
echo "WARNING: this script HAS TO access internet (http/https/ftp),"
echo "so please make sure your network working properly!!"
LOGSDIR="logs"
mkdir -p $LOGSDIR
# Check extistence of prerequisites files
need_file ${rpm_downloader} ${other_downloader} ${tarball_downloader}
make_if_needed_file ${rpms_from_3rd_parties}
make_if_needed_file ${rpms_from_centos_3rd_parties}
make_if_needed_file ${rpms_from_centos_repo}
make_if_needed_file ${other_downloads}
make_if_needed_file ${tarball_downloads}
#
# Dowlnoad package lst files, image inc files and build info files for lower layers.
#
# Also it may set up extra arguements for make_stx_mirror_yum_conf that
# will exploy yum repos co-resident with the lst file.
#
\rm -rf ${rpms_from_layer_build_dir}
mkdir -p ${rpms_from_layer_build_dir}
for key in "${!layer_pkg_urls[@]}"; do
lower_layer="${key%,*}"
build_type="${key#*,}"
url="${layer_pkg_urls[${key}]}"
name_from_url=$(url_to_file_name $url)
list="${rpms_from_layer_build_dir}/${name_from_url}"
curl --silent --fail ${url} > ${list} ||
if [ $? -ne 0 ]; then
echo "ERROR: Failed to download from url: ${url}"
exit 1
fi
#
# If the lst file is co-resident with a yum repodata directory,
# then add arguements for our call to make_stx_mirror_yum_conf
# so that we'll use that repo.
#
url_type=${url%%:*}
if [ "${url_type}" == "file" ]; then
base_url=$(dirname $url)
repomod_url=${base_url}/repodata/repomd.xml
curl --silent --fail --output /dev/null ${repomod_url} ||
if [ $? -ne 0 ]; then
echo "ERROR: Failed to download from url: ${url}"
exit 1
fi
make_stx_mirror_yum_conf_extra_args+=" -u ${lower_layer},${build_type},${base_url}"
fi
done
\rm -rf ${image_inc_from_layer_build_dir}
mkdir -p ${image_inc_from_layer_build_dir}
for key in "${!layer_image_inc_urls[@]}"; do
lower_layer="${key%,*}"
inc_type="${key#*,}"
url="${layer_image_inc_urls[${key}]}"
name_from_url=$(url_to_file_name $url)
list="${image_inc_from_layer_build_dir}/${name_from_url}"
curl --silent --fail ${url} > ${list} ||
if [ $? -ne 0 ]; then
echo "ERROR: Failed to download from url: ${url}"
exit 1
fi
done
\rm -rf ${wheels_inc_from_layer_build_dir}
mkdir -p ${wheels_inc_from_layer_build_dir}
for key in "${!layer_wheels_inc_urls[@]}"; do
lower_layer="${key%,*}"
stream="${key#*,}"
url="${layer_wheels_inc_urls[${key}]}"
name_from_url=$(url_to_file_name $url)
list="${wheels_inc_from_layer_build_dir}/${name_from_url}"
curl --silent --fail ${url} > ${list} ||
if [ $? -ne 0 ]; then
echo "ERROR: Failed to download from url: ${url}"
exit 1
fi
done
\rm -rf ${build_info_from_layer_build_dir}
mkdir -p ${build_info_from_layer_build_dir}
# Borrow std image.inc url as a proxy for the BUILD_INFO with a simple substitution
for key in "${!layer_image_inc_urls[@]}"; do
lower_layer="${key%,*}"
inc_type="${key#*,}"
if [ "${inc_type}" != "std" ]; then
continue
fi
if [ "$(basename ${layer_image_inc_urls[${key}]})" != "image.inc" ]; then
continue
fi
url=$( echo ${layer_image_inc_urls[${key}]} | sed 's#image.inc$#BUILD_INFO#' )
name_from_url=$(url_to_file_name $url)
dest="${build_info_from_layer_build_dir}/${name_from_url}"
curl --silent --fail ${url} > ${dest} ||
if [ $? -ne 0 ]; then
echo "ERROR: Failed to download from url: ${url}"
exit 1
fi
done
echo "step #0: Configuring yum repos ..."
if [ ${use_system_yum_conf} -ne 0 ]; then
# Restore StarlingX_3rd repos from backup
REPO_DIR=/etc/yum.repos.d
if [ $layer != "all" ]; then
if [ -d ${config_dir}/${distro}/${layer}/yum.repos.d ]; then
${SUDO} \cp -f -v ${config_dir}/${distro}/${layer}/yum.repos.d/*.repo $REPO_DIR/
fi
else
# copy all layers
${SUDO} \cp -f -v ${config_dir}/${distro}/*/yum.repos.d/*.repo $REPO_DIR/
fi
fi
if [ $use_system_yum_conf -eq 0 ]; then
need_file "${alternate_yum_conf}"
if [ "$alternate_repo_dir" == "" ]; then
alternate_repo_dir=$(grep '^reposdir=' "${alternate_yum_conf}" | cut -d '=' -f 2)
if [ "$alternate_repo_dir" == "" ]; then
alternate_repo_dir="$(dirname "${alternate_yum_conf}"/yum.repos.d)"
fi
if [[ $alternate_repo_dir != /* ]]; then
# Path is relative, so prefix with directory where yum.conf lives
alternate_repo_dir=$(dirname ${alternate_yum_conf})/${alternate_repo_dir}
fi
need_dir "${alternate_repo_dir}"
fi
fi
rpm_downloader_extra_args="${rpm_downloader_extra_args} -D $distro"
if [ "$dl_flag" != "" ]; then
# Pass dl_flag on to the rpm_downloader script
rpm_downloader_extra_args="${rpm_downloader_extra_args} $dl_flag"
fi
if ! dl_from_stx; then
# Not using stx mirror
if [ $use_system_yum_conf -eq 0 ]; then
# Use provided yum.conf unaltered.
rpm_downloader_extra_args="${rpm_downloader_extra_args} -c ${alternate_yum_conf}"
fi
else
# We want to use stx mirror, so we need to create a new, modified yum.conf and yum.repos.d.
# The modifications will add or substitute repos pointing to the StralingX mirror.
if [ "$TEMP_DIR" == "" ]; then
if [ "$MY_WORKSPACE" != "" ]; then
TEMP_DIR="$MY_WORKSPACE/tmp/yum"
else
TEMP_DIR=$(mktemp -d /tmp/stx_mirror_XXXXXX)
TEMP_DIR_CLEANUP="y"
fi
fi
if [ ! -d $TEMP_DIR ]; then
mkdir -p ${TEMP_DIR}
fi
TEMP_CONF="$TEMP_DIR/yum.conf"
need_file ${make_stx_mirror_yum_conf}
need_dir ${TEMP_DIR}
if [ $use_system_yum_conf -eq 0 ]; then
# Modify user provided yum.conf. We expect ir to have a 'reposdir=' entry to
# point to the repos that need to be modified as well.
if dl_from_upstream; then
# add
echo "${make_stx_mirror_yum_conf} -R -d $TEMP_DIR -y $alternate_yum_conf -r $alternate_repo_dir -D $distro -l $layer ${make_stx_mirror_yum_conf_extra_args}"
${make_stx_mirror_yum_conf} -R -d $TEMP_DIR -y $alternate_yum_conf -r $alternate_repo_dir -D $distro -l $layer ${make_stx_mirror_yum_conf_extra_args}
else
# substitute
echo "${make_stx_mirror_yum_conf} -d $TEMP_DIR -y $alternate_yum_conf -r $alternate_repo_dir -D $distro -l $layer ${make_stx_mirror_yum_conf_extra_args}"
${make_stx_mirror_yum_conf} -d $TEMP_DIR -y $alternate_yum_conf -r $alternate_repo_dir -D $distro -l $layer ${make_stx_mirror_yum_conf_extra_args}
fi
else
# Modify system yum.conf and yum.repos.d. Remember that we expect to run this
# inside a container, and the system yum.conf has like been modified else where
# in these scripts.
if dl_from_upstream; then
# add
echo "${make_stx_mirror_yum_conf} -R -d $TEMP_DIR -y /etc/yum.conf -r /etc/yum.repos.d -D $distro -l $layer ${make_stx_mirror_yum_conf_extra_args}"
${make_stx_mirror_yum_conf} -R -d $TEMP_DIR -y /etc/yum.conf -r /etc/yum.repos.d -D $distro -l $layer ${make_stx_mirror_yum_conf_extra_args}
else
# substitute
echo "${make_stx_mirror_yum_conf} -d $TEMP_DIR -y /etc/yum.conf -r /etc/yum.repos.d -D $distro -l $layer ${make_stx_mirror_yum_conf_extra_args}"
${make_stx_mirror_yum_conf} -d $TEMP_DIR -y /etc/yum.conf -r /etc/yum.repos.d -D $distro -l $layer ${make_stx_mirror_yum_conf_extra_args}
fi
fi
rpm_downloader_extra_args="${rpm_downloader_extra_args} -c $TEMP_CONF"
fi
#download RPMs/SRPMs from lower layer builds
echo "step #1: start downloading RPMs/SRPMs from lower layer builds..."
retcode=0
for key in "${!layer_pkg_urls[@]}"; do
lower_layer="${key%,*}"
build_type="${key#*,}"
url="${layer_pkg_urls[${key}]}"
name_from_url=$(url_to_file_name $url)
list="${rpms_from_layer_build_dir}/${name_from_url}"
url_type=${url%%:*}
if [ "${url_type}" == "file" ]; then
level=L1
logfile=$(generate_log_name $list level)
$rpm_from_url_downloader -u $(dirname $url) $list |& tee $logfile
local_retcode=${PIPESTATUS[0]}
else
#download RPMs/SRPMs from CentOS repos by "yumdownloader"
level=L1
logfile=$(generate_log_name $list $level)
if ! dl_from_stx; then
# Not using stx mirror
if [ $use_system_yum_conf -eq 0 ]; then
# Use provided yum.conf unaltered.
llrd_extra_args="-c ${alternate_yum_conf}"
fi
else
llrd_extra_args="-c ${TEMP_DIR}/yum.conf"
fi
echo "$lower_layer_rpm_downloader -l ${lower_layer} -b ${build_type} -r $(dirname $url) ${llrd_extra_args} ${list} ${level}"
$lower_layer_rpm_downloader -l ${lower_layer} -b ${build_type} -r $(dirname $url) ${llrd_extra_args} ${list} ${level} |& tee $logfile
local_retcode=${PIPESTATUS[0]}
fi
if [ $local_retcode -ne 0 ]; then
echo "ERROR: Something wrong with downloading files listed in $list."
echo " Please check the log at $(pwd)/$logfile !"
echo ""
success=0
retcode=$local_retcode
fi
done
if [ $retcode -eq 0 ];then
echo "step #1: done successfully"
else
echo "step #1: finished with errors"
fi
#download RPMs/SRPMs from 3rd_party websites (not CentOS repos) using curl
echo "step #2: start downloading RPMs/SRPMs from 3rd-party websites..."
list=${rpms_from_3rd_parties}
level=L1
logfile=$(generate_log_name $list $level)
$rpm_downloader ${rpm_downloader_extra_args} $list $level |& tee $logfile
retcode=${PIPESTATUS[0]}
if [ $retcode -ne 0 ];then
echo "ERROR: Something wrong with downloading files listed in $list."
echo " Please check the log at $(pwd)/$logfile !"
echo ""
success=0
fi
# download RPMs/SRPMs from 3rd_party repos by "yumdownloader"
list=${rpms_from_centos_3rd_parties}
level=L1
logfile=$(generate_log_name $list $level)
$rpm_downloader ${rpm_downloader_extra_args} $list $level |& tee $logfile
retcode=${PIPESTATUS[0]}
if [ $retcode -eq 0 ];then
echo "step #2: done successfully"
else
echo "step #2: finished with errors"
echo "ERROR: Something wrong with downloading files listed in $list."
echo " Please check the log at $(pwd)/$logfile !"
echo ""
echo "step #2: finished with errors"
success=0
fi
if [ ${use_system_yum_conf} -eq 1 ]; then
# deleting the StarlingX_3rd to avoid pull centos packages from the 3rd Repo.
# cengn references for backward compatibility if transitioning
# a pre-existing build environment.
${SUDO} \rm -f $REPO_DIR/StarlingX_3rd*.repo
${SUDO} \rm -f $REPO_DIR/StarlingX_cengn*.repo
${SUDO} \rm -f $REPO_DIR/StarlingX_mirror*.repo
if [ "$TEMP_DIR" != "" ]; then
${SUDO} \rm -f $TEMP_DIR/yum.repos.d/StarlingX_3rd*.repo
${SUDO} \rm -f $TEMP_DIR/yum.repos.d/StarlingX_cengn*.repo
${SUDO} \rm -f $TEMP_DIR/yum.repos.d/StarlingX_mirror*.repo
fi
fi
echo "step #3: start 1st round of downloading RPMs and SRPMs with L1 match criteria..."
#download RPMs/SRPMs from CentOS repos by "yumdownloader"
list=${rpms_from_centos_repo}
level=L1
logfile=$(generate_log_name $list $level)
$rpm_downloader ${rpm_downloader_extra_args} $list $level |& tee $logfile
retcode=${PIPESTATUS[0]}
K1_logfile=$(generate_log_name ${rpms_from_centos_repo} K1)
if [ $retcode -ne 1 ]; then
# K1 step not needed. Clear any K1 logs from previous download attempts.
$rpm_downloader -x $LOGSDIR/L1_rpms_missing_centos.log K1 |& tee $K1_logfile
fi
if [ $retcode -eq 0 ]; then
echo "finish 1st round of RPM downloading successfully!"
elif [ $retcode -eq 1 ]; then
echo "finish 1st round of RPM downloading with missing files!"
if [ -e "$LOGSDIR/L1_rpms_missing_centos.log" ]; then
echo "start 2nd round of downloading Binary RPMs with K1 match criteria..."
$rpm_downloader ${rpm_downloader_extra_args} $LOGSDIR/L1_rpms_missing_centos.log K1 centos |& tee $K1_logfile
retcode=${PIPESTATUS[0]}
if [ $retcode -eq 0 ]; then
echo "finish 2nd round of RPM downloading successfully!"
elif [ $retcode -eq 1 ]; then
echo "finish 2nd round of RPM downloading with missing files!"
if [ -e "$LOGSDIR/rpms_missing_K1.log" ]; then
echo "WARNING: missing RPMs listed in $LOGSDIR/centos_rpms_missing_K1.log !"
fi
fi
# Remove files found by K1 download from L1_rpms_missing_centos.txt to prevent
# false reporting of missing files.
grep -v -x -F -f $LOGSDIR/K1_rpms_found_centos.log $LOGSDIR/L1_rpms_missing_centos.log > $LOGSDIR/L1_rpms_missing_centos.tmp || true
mv -f $LOGSDIR/L1_rpms_missing_centos.tmp $LOGSDIR/L1_rpms_missing_centos.log
missing_num=`wc -l $LOGSDIR/K1_rpms_missing_centos.log | cut -d " " -f1-1`
if [ "$missing_num" != "0" ];then
echo "ERROR: -------RPMs missing: $missing_num ---------------"
retcode=1
fi
fi
if [ -e "$LOGSDIR/L1_srpms_missing_centos.log" ]; then
missing_num=`wc -l $LOGSDIR/L1_srpms_missing_centos.log | cut -d " " -f1-1`
if [ "$missing_num" != "0" ];then
echo "ERROR: --------- SRPMs missing: $missing_num ---------------"
retcode=1
fi
fi
fi
if [ $retcode -eq 0 ];then
echo "step #3: done successfully"
else
echo "ERROR: Something wrong with downloading files listed in ${rpms_from_centos_repo}."
echo " Please check the logs at $(pwd)/$logfile"
echo " and $(pwd)/logs/$K1_logfile !"
echo ""
echo "step #3: finished with errors"
success=0
fi
## verify all RPMs SRPMs we download for the GPG keys
find ./output -type f -name "*.rpm" | xargs rpm -K | grep -i "MISSING KEYS" > $LOGSDIR/rpm-gpg-key-missing.txt || true
# remove all i686.rpms to avoid pollute the chroot dep chain
find ./output -name "*.i686.rpm" | tee $LOGSDIR/all_i686.txt
find ./output -name "*.i686.rpm" | xargs rm -f
# Count unique rpms. Strip extra fields from 'rpms_from_3rd_partiesIgnore',
# commented out entries, and blank lines.
total_line=$(sed 's/#.*//' ${rpms_from_3rd_parties} \
${rpms_from_centos_repo} \
${rpms_from_centos_3rd_parties} \
| grep -v '^$' \
| sort --unique \
| wc -l)
echo "We expected to download $total_line RPMs."
num_of_downloaded_rpms=$(find ./output -type f -name "*.rpm" | wc -l | cut -d" " -f1-1)
echo "There are $num_of_downloaded_rpms RPMs in output directory."
if [ "$total_line" != "$num_of_downloaded_rpms" ]; then
echo "WARNING: Not the same number of RPMs in output as RPMs expected to be downloaded, need to check outputs and logs."
fi
if [ $change_group_ids -eq 1 ]; then
# change "./output" and sub-folders to 751 (cgcs) group
NEW_UID=$(id -u)
NEW_GID=751
${SUDO} chown ${NEW_UID}:${NEW_GID} -R ./output
fi
echo "step #4: start downloading other files ..."
logfile=$LOGSDIR"/otherfiles_centos_download.log"
${other_downloader} ${dl_flag} -D "$distro" ${other_downloads} ${DL_MIRROR_OUTPUT_DIR}/Binary/ |& tee $logfile
retcode=${PIPESTATUS[0]}
if [ $retcode -eq 0 ];then
echo "step #4: done successfully"
else
echo "step #4: finished with errors"
echo "ERROR: Something wrong with downloading from ${other_downloads}."
echo " Please check the log at $(pwd)/$logfile!"
echo ""
success=0
fi
# StarlingX requires a group of source code pakages, in this section
# they will be downloaded.
echo "step #5: start downloading tarball compressed files"
logfile=$LOGSDIR"/tarballs_download.log"
${tarball_downloader} ${dl_flag} -D "$distro" ${tarball_downloader_extra_args} ${tarball_downloads} |& tee $logfile
retcode=${PIPESTATUS[0]}
if [ $retcode -eq 0 ];then
echo "step #5: done successfully"
else
echo "step #5: finished with errors"
echo "ERROR: Something wrong with downloading tarballs."
echo " Please check the log at $(pwd)/$logfile !"
echo ""
success=0
fi
#
# Clean up the mktemp directory, if required.
#
if [ "$TEMP_DIR" != "" ] && [ "$TEMP_DIR_CLEANUP" == "y" ]; then
echo "${SUDO} rm -rf $TEMP_DIR"
${SUDO} \rm -rf "$TEMP_DIR"
fi
echo "IMPORTANT: The following 3 files are just bootstrap versions. Based"
echo "on them, the workable images for StarlingX could be generated by"
echo "running \"update-pxe-network-installer\" command after \"build-iso\""
echo " - ${DL_MIRROR_OUTPUT_DIR}/Binary/LiveOS/squashfs.img"
echo " - ${DL_MIRROR_OUTPUT_DIR}/Binary/images/pxeboot/initrd.img"
echo " - ${DL_MIRROR_OUTPUT_DIR}/Binary/images/pxeboot/vmlinuz"
echo ""
if [ $success -ne 1 ]; then
echo "Warning: Not all download steps succeeded. You are likely missing files."
exit 1
fi
echo "Success"
exit 0

286
centos-mirror-tools/make_stx_mirror_yum_conf.sh
View File

@ -1,286 +0,0 @@
#!/bin/bash
#
# SPDX-License-Identifier: Apache-2.0
#
#
# Replicate a yum.conf and yum.repo.d under a temporary directory and
# then modify the files to point to equivalent repos in the StarlingX mirror.
# This script was originated by Scott Little
#
MAKE_STX_MIRROR_YUM_CONF_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
source "$MAKE_STX_MIRROR_YUM_CONF_DIR/utils.sh" || exit 1
DISTRO="centos"
SUDO=sudo
TEMP_DIR=""
SRC_REPO_DIR="$MAKE_STX_MIRROR_YUM_CONF_DIR/yum.repos.d"
SRC_YUM_CONF="$MAKE_STX_MIRROR_YUM_CONF_DIR/yum.conf.sample"
RETAIN_REPODIR=0
usage () {
echo ""
echo "$0 -d <dest_dir> [-D <distro>] [-y <src_yum_conf>] [-r <src_repos_dir>] [-R] [-l <layer>] [-u <lower-layer>,<repo_url>]"
echo ""
echo "Replicate a yum.conf and yum.repo.d under a new directory and"
echo "then modify the files to point to equivalent repos in the StarlingX"
echo "mirror."
echo ""
echo "-d <dest_dir> = Place modified yum.conf and yum.repo.d into this directory"
echo "-D <distro> = Target distro on StarlingX mirror. Default is 'centos'"
echo "-y <yum_conf> = Path to yum.conf file that we will modify. Default is"
echo " 'yum.conf.sample' in same directory as this script"
echo "-r <repos_dir> = Path to yum.repos.d that we will modify. Default is"
echo " 'yum.repos.d' in same directory as this script"
echo "-l <layer> = Download only packages required to build a given layer"
echo "-u <lower-layer>,<build-type>,<repo_url> = Add/change the repo baseurl for a lower layer"
echo "-n don't use sudo"
}
declare -A layer_urls
set_layer_urls () {
local option="${1}"
local layer_and_build_type="${option%,*}"
local layer="${layer_and_build_type%,*}"
local build_type="${layer_and_build_type#*,}"
local layer_url="${option##*,}"
# Enforce trailing '/'
if [ "${layer_url:${#layer_url}-1:1}" != "/" ]; then
layer_url+="/"
fi
layer_urls["${layer_and_build_type}"]="${layer_url}"
}
#
# option processing
#
while getopts "D:d:l:nRr:u:y:" o; do
case "${o}" in
D)
DISTRO="${OPTARG}"
;;
d)
TEMP_DIR="${OPTARG}"
;;
l)
LAYER="${OPTARG}"
;;
n)
SUDO=""
;;
r)
SRC_REPO_DIR="${OPTARG}"
;;
R)
RETAIN_REPODIR=1
;;
u)
set_layer_urls "${OPTARG}"
;;
y)
SRC_YUM_CONF="${OPTARG}"
;;
*)
usage
exit 1
;;
esac
done
#
# option validation
#
if [ ! -f $SRC_YUM_CONF ]; then
echo "Error: yum.conf not found at '$SRC_YUM_CONF'"
exit 1
fi
if [ ! -d $SRC_REPO_DIR ]; then
echo "Error: repo dir not found at '$SRC_REPO_DIR'"
exit 1
fi
if [ "$TEMP_DIR" == "" ]; then
echo "Error: working dir not provided"
usage
exit 1
fi
if [ ! -d $TEMP_DIR ]; then
echo "Error: working dir not found at '$TEMP_DIR'"
exit 1
fi
#
# Get the value of the $releasever variable.
#
# If the source yum.conf has a releasever= setting, we will honor
# that, even though yum will not.
#
# Otherwise use yum to query the host environment (Docker).
# This assumes the host environmnet has the same releasever
# as that which will be used inside StarlingX.
#
# NOTE: In other scripts we will read releasever= out of yum.conf
# and push it back into yum via --releasever=<#>.
#
get_releasever () {
if [ -f $SRC_YUM_CONF ] && grep -q '^releasever=' $SRC_YUM_CONF; then
grep '^releasever=' $SRC_YUM_CONF | cut -d '=' -f 2
else
${SUDO} yum version nogroups | grep Installed | cut -d ' ' -f 2 | cut -d '/' -f 1
fi
}
#
# Get the value of the $basearch variable.
#
# Just use yum to query the host environment (Docker) as we don't support
# cross compiling.
#
get_arch () {
${SUDO} yum version nogroups | grep Installed | cut -d ' ' -f 2 | cut -d '/' -f 2
}
#
# Global variables we will use later.
#
STX_MIRROR_REPOS_DIR="$TEMP_DIR/yum.repos.d"
STX_MIRROR_YUM_CONF="$TEMP_DIR/yum.conf"
STX_MIRROR_YUM_LOG="$TEMP_DIR/yum.log"
STX_MIRROR_YUM_CACHDIR="$TEMP_DIR/cache/yum/\$basearch/\$releasever"
RELEASEVER=$(get_releasever)
ARCH=$(get_arch)
#
# Copy as yet unmodified yum.conf and yum.repos.d from source to dest.
#
mkdir -p "$STX_MIRROR_REPOS_DIR"
echo "\cp -r '$SRC_REPO_DIR/*' '$STX_MIRROR_REPOS_DIR/'"
\cp -r "$SRC_REPO_DIR"/* "$STX_MIRROR_REPOS_DIR/"
echo "\cp '$SRC_YUM_CONF' '$STX_MIRROR_YUM_CONF'"
\cp "$SRC_YUM_CONF" "$STX_MIRROR_YUM_CONF"
if [ "$LAYER" != "all" ]; then
if [ -d ${MAKE_STX_MIRROR_YUM_CONF_DIR}/config/${DISTRO}/${LAYER}/yum.repos.d ]; then
\cp -f ${MAKE_STX_MIRROR_YUM_CONF_DIR}/config/${DISTRO}/${LAYER}/yum.repos.d/*.repo $STX_MIRROR_REPOS_DIR
fi
fi
#
# Add or modify reposdir= value in our new yum.conf
#
if grep -q '^reposdir=' $STX_MIRROR_YUM_CONF; then
# reposdir= already exists, modify it
if [ $RETAIN_REPODIR -eq 1 ]; then
# Append STX_MIRROR_REPOS_DIR
sed "s#^reposdir=\(.*\)\$#reposdir=\1 $STX_MIRROR_REPOS_DIR#" -i $STX_MIRROR_YUM_CONF
else
# replace with STX_MIRROR_REPOS_DIR
sed "s#^reposdir=.*\$#reposdir=$STX_MIRROR_REPOS_DIR#" -i $STX_MIRROR_YUM_CONF
fi
else
# reposdir= doeas not yet exist, add it
if [ $RETAIN_REPODIR -eq 1 ]; then
# Add both SRC_REPO_DIR and STX_MIRROR_REPOS_DIR
echo "reposdir=$SRC_REPO_DIR $STX_MIRROR_REPOS_DIR" >> $STX_MIRROR_YUM_CONF
else
# Add STX_MIRROR_REPOS_DIR only
echo "reposdir=$STX_MIRROR_REPOS_DIR" >> $STX_MIRROR_YUM_CONF
fi
fi
#
# modify or add logfile= value in our new yum.conf
#
if grep -q '^logfile=' $STX_MIRROR_YUM_CONF; then
sed "s#^logfile=.*\$#logfile=$STX_MIRROR_YUM_LOG#" -i $STX_MIRROR_YUM_CONF
else
echo "logfile=$STX_MIRROR_YUM_LOG" >> $STX_MIRROR_YUM_CONF
fi
#
# modify or add cachedir= value in our new yum.conf
#
if grep -q '^cachedir=' $STX_MIRROR_YUM_CONF; then
sed "s#^cachedir=.*\$#cachedir=$STX_MIRROR_YUM_CACHDIR#" -i $STX_MIRROR_YUM_CONF
else
echo "cachedir=$STX_MIRROR_YUM_CACHDIR" >> $STX_MIRROR_YUM_CONF
fi
#
# Modify all the repo files in our new yum.repos.d
#
for REPO in $(find "$STX_MIRROR_REPOS_DIR" -type f -name '*repo'); do
#
# Replace mirrorlist with baseurl if required
#
if grep -q '^mirrorlist=' "$REPO" ; then
sed '/^mirrorlist=/d' -i "$REPO"
sed 's%^#baseurl%baseurl%' -i "$REPO"
fi
#
# Substitute any $releasever or $basearch variables
#
sed "s#/[$]releasever/#/$RELEASEVER/#g" -i "$REPO"
sed "s#/[$]basearch/#/$ARCH/#g" -i "$REPO"
#
# Turn off gpgcheck for now.
# Must revisit this at a later date!
#
sed 's#^gpgcheck=1#gpgcheck=0#' -i "$REPO"
sed '/^gpgkey=/d' -i "$REPO"
#
# Convert baseurl(s) to StarlingX mirror equivalent
#
for URL in $(grep '^baseurl=' "$REPO" | sed 's#^baseurl=##'); do
STX_MIRROR_URL="$(url_to_stx_mirror_url "$URL" "$DISTRO")"
# Test STX_MIRROR url
url_exists --quiet "$STX_MIRROR_URL"
if [ $? -eq 0 ]; then
# OK, make substitution
sed "s#^baseurl=$URL\$#baseurl=$STX_MIRROR_URL#" -i "$REPO"
fi
done
#
# Prefix repoid and name with STX_MIRROR
#
sed "s#^name=\(.*\)#name=STX_MIRROR_\1#" -i "$REPO"
sed "s#^\[\([^]]*\)\]#[STX_MIRROR_\1]#" -i "$REPO"
done
for key in "${!layer_urls[@]}"; do
lower_layer="${key%,*}"
build_type="${key#*,}"
REPO="$STX_MIRROR_REPOS_DIR/StarlingX_mirror_${lower_layer}_layer.repo"
if [ -f "$REPO" ]; then
sed "s#^baseurl=.*/${lower_layer}/.*/${build_type}/\$#baseurl=${layer_urls[${key}]}#" -i "$REPO"
else
REPO="$STX_MIRROR_REPOS_DIR/StarlingX_local_${lower_layer}_${build_type}_layer.repo"
(
echo "[Starlingx-local_${lower_layer}_${build_type}_layer]"
echo "name=Starlingx-mirror_${lower_layer}_${build_type}_layer"
echo "baseurl=${layer_urls[${key}]}"
echo "enabled=1"
) > "$REPO"
fi
done
echo $TEMP_DIR

197
centos-mirror-tools/mirror-check.sh
View File

@ -1,197 +0,0 @@
#!/bin/bash
#
# SPDX-License-Identifier: Apache-2.0
#
# Copyright (C) 2019 Intel Corporation
#
# This script checks if the required packages in the .lst file list is
# actually downloadable. Sometimes, the release number in upstream is
# changed and that causes a mismatch in the build requirements.
# We can find this problems in an early stage without the need to
# download all the packages.
#
# The yum cache contains this information, more specific the primary_db
# files, so iterating over the content of .lst, parse the name of the
# package and get the information on what is available to download
# should be enough to know the status of the mirror.
#
# If a package is not found then the script will try to get the avai-
# lable version and log that into the error log. By this way we get
# notified on what changed in the external repositories.
#
# How to run:
# This script is intended to be run inside the downloader container.
# It needs that all the CentOS repositories are well setup.
#
# ./mirror-check.sh
#
# And you should see the checking in progress.
_print_msg() { echo -en "$(date -u +"%Y-%m-%d %H-%M-%S") ==> $1"; }
info() { _print_msg "INFO: $1\n"; }
info_c() { _print_msg "INFO: $1"; }
warning() { _print_msg "WARN: $1\n"; }
error() { _print_msg "ERROR: $1\n"; }
RPMS_CENTOS_LIST="rpms_centos.lst"
RPMS_3RD_PARTY_LIST="rpms_centos3rdparties.lst"
ERROR_LOG_FILE="mirror-check-failures.log"
truncate -s 0 $ERROR_LOG_FILE
retcode=0
extra_opts=""
layer="$LAYER"
valid_layers=('compiler' 'distro' 'flock')
# Cloned from cgcs-root/build-tools/pkg-manager-utils.sh
# Ideally this can still be used when tools is the only git
# that has been cloned.
# Yum vs DNF compatibility
YUM=$(which yum 2>> /dev/null)
DNF=$(which dnf 2>> /dev/null)
PKG_MANAGER=""
REPOQUERY=$(which repoquery 2>> /dev/null)
REPOQUERY_SUB_COMMAND=""
REPOQUERY_RESOLVE="--resolve"
REPOQUERY_WHATPROVIDES_DELIM=" "
if [ ! -z ${DNF} ]; then
PKG_MANAGER="dnf"
REPOQUERY=${DNF}
REPOQUERY_SUB_COMMAND="repoquery --disable-modular-filtering"
REPOQUERY_RESOLVE=""
REPOQUERY_WHATPROVIDES_DELIM=","
elif [ ! -z ${YUM} ]; then
PKG_MANAGER="yum"
else
>&2 echo "ERROR: Couldn't find a supported package manager"
exit 1
fi
usage() {
echo "$0 [-c <yum.conf>] [-l <layer>]"
echo ""
echo "Options:"
echo " -c: Use an alternate yum.conf rather than the system file (option passed"
echo " on to subscripts when appropriate)"
echo " -l: Check specific layer (one of 'all ${valid_layers[@]}')"
echo ""
}
get_rpm_name() {
_rpm_file_name=$1
rpm_name=$(echo "$_rpm_file_name" | rev | cut -d'-' -f3- | rev)
echo "$rpm_name"
}
get_rpm_full_name() {
_rpm_file_name=$1
rpm_name=$(echo "$_rpm_file_name" | rev | cut -d'.' -f2- | rev)
echo "$rpm_name"
}
get_rpm_arch() {
arch=$(echo "$1" | rev | cut -d'.' -f2 | rev)
echo "$arch"
}
get_repoquery_info() {
_arch=$1
_package_name=$2
if [ "$_arch" == "x86_64" ]; then
# To filter out the i686 packages
repoquery_opts="--archlist=x86_64"
elif [ "$_arch" == "src" ]; then
repoquery_opts="--archlist=src"
else
repoquery_opts=
fi
$REPOQUERY $REPOQUERY_SUB_COMMAND \
$extra_opts ${RELEASEVER} -C \
--qf '%{NAME}-%{VERSION}-%{RELEASE}.%{ARCH}' \
$repoquery_opts "$_package_name"
}
_check_rpms() {
p=$1
full_name=$(get_rpm_full_name "$p")
rpm_name=$(get_rpm_name "$p")
arch=$(get_rpm_arch "$p")
info_c "Checking $full_name... "
_repoquery=$(get_repoquery_info "$arch" "$full_name")
if [ -z "$_repoquery" ]; then
echo -e "FAILED!"
available_pkgs=$(get_repoquery_info "$arch" "$rpm_name")
echo -e "Package $full_name not found, available $available_pkgs" >> $ERROR_LOG_FILE
retcode=1
else
if [ "$full_name" == "$_repoquery" ]; then
echo -e "OK"
else
echo -e "FAILED!"
retcode=1
echo -e "Required $full_name but found $_repoquery" >> $ERROR_LOG_FILE
fi
fi
}
check_rpms() {
_rpms_list=$1
for p in $_rpms_list; do
_check_rpms "$p"
done
}
while getopts "c:l:" opt; do
case $opt in
c)
extra_opts="-c ${OPTARG}"
grep -q "releasever=" $OPTARG && RELEASEVER="--$(grep releasever= ${OPTARG})"
;;
l)
layer="${OPTARG}"
if [ "$layer" == "all" ]; then
layer=""
else
case " ${valid_layers[@]} " in
*" $layer "* ) echo "found layer $layer"
;;
*) echo "'$layer' is invalid"
usage
exit 1
;;
esac
fi
;;
\?)
echo "Invalid option: -$OPTARG" >&2
usage
exit 1
;;
esac
done
info "Getting yum cache"
if ! yum $extra_opts ${RELEASEVER} makecache; then
error "There was a problem getting yum cache"
exit 1
fi
for rpm_list in $(find config/centos/$layer -name "$RPMS_CENTOS_LIST" -o -name "$RPMS_3RD_PARTY_LIST"); do
info "Reading $rpm_list..."
for arch in "src" "noarch" "x86_64"; do
info "Getting info for $arch packages..."
rpms=$(echo "$(grep -v '^#' $rpm_list | grep -F "$arch.rpm")")
check_rpms "$rpms"
done
done
if [ $retcode -ne 0 ]; then
error "Failures found, error log:"
error "=========================="
cat $ERROR_LOG_FILE
fi
exit $retcode

28
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-CentOS-5
View File

@ -1,28 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1.2.6 (GNU/Linux)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=o/Mx
-----END PGP PUBLIC KEY BLOCK-----

30
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-CentOS-6
View File

@ -1,30 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1.4.5 (GNU/Linux)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=jrWY
-----END PGP PUBLIC KEY BLOCK-----

30
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-CentOS-7
View File

@ -1,30 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1.4.5 (GNU/Linux)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=OGYX
-----END PGP PUBLIC KEY BLOCK-----

30
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-CentOS-8
View File

@ -1,30 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v2.0.22 (GNU/Linux)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=kkH7
-----END PGP PUBLIC KEY BLOCK-----

30
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-CentOS-Debug-6
View File

@ -1,30 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1.4.5 (GNU/Linux)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=9b/M
-----END PGP PUBLIC KEY BLOCK-----

20
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-CentOS-SIG-OpsTools
View File

@ -1,20 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v2.0.22 (GNU/Linux)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=R48J
-----END PGP PUBLIC KEY BLOCK-----

20
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-CentOS-SIG-SCLo
View File

@ -1,20 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v2.0.22 (GNU/Linux)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=UtPD
-----END PGP PUBLIC KEY BLOCK-----

20
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-CentOS-SIG-Storage
View File

@ -1,20 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v2.0.22 (GNU/Linux)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=a0nM
-----END PGP PUBLIC KEY BLOCK-----

20
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-CentOS-SIG-Virtualization
View File

@ -1,20 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ZzP+
-----END PGP PUBLIC KEY BLOCK-----

30
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-CentOS-Security-6
View File

@ -1,30 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1.4.5 (GNU/Linux)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=yuja
-----END PGP PUBLIC KEY BLOCK-----

30
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-CentOS-Testing-6
View File

@ -1,30 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1.4.5 (GNU/Linux)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=NsO7
-----END PGP PUBLIC KEY BLOCK-----

19
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-Cloud-SIG
View File

@ -1,19 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: SKS 1.1.6
Comment: Hostname: keyserver.ntzwrk.org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=W6yF
-----END PGP PUBLIC KEY BLOCK-----

28
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-DOCKER
View File

@ -1,28 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----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=0Zqq
-----END PGP PUBLIC KEY BLOCK-----

31
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-EPEL-6
View File

@ -1,31 +0,0 @@
pub 4096R/0608B895 2010-04-23 EPEL (6) <epel@fedoraproject.org>
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1.4.5 (GNU/Linux)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=V/6I
-----END PGP PUBLIC KEY BLOCK-----

31
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-EPEL-7
View File

@ -1,31 +0,0 @@
pub 4096R/352C64E5 2013-12-16 Fedora EPEL (7) <epel@fedoraproject.org>
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: rpm-4.11.1 (NSS-3)
mQINBFKuaIQBEAC1UphXwMqCAarPUH/ZsOFslabeTVO2pDk5YnO96f+rgZB7xArB
OSeQk7B90iqSJ85/c72OAn4OXYvT63gfCeXpJs5M7emXkPsNQWWSju99lW+AqSNm
jYWhmRlLRGl0OO7gIwj776dIXvcMNFlzSPj00N2xAqjMbjlnV2n2abAE5gq6VpqP
vFXVyfrVa/ualogDVmf6h2t4Rdpifq8qTHsHFU3xpCz+T6/dGWKGQ42ZQfTaLnDM
jToAsmY0AyevkIbX6iZVtzGvanYpPcWW4X0RDPcpqfFNZk643xI4lsZ+Y2Er9Yu5
S/8x0ly+tmmIokaE0wwbdUu740YTZjCesroYWiRg5zuQ2xfKxJoV5E+Eh+tYwGDJ
n6HfWhRgnudRRwvuJ45ztYVtKulKw8QQpd2STWrcQQDJaRWmnMooX/PATTjCBExB
9dkz38Druvk7IkHMtsIqlkAOQMdsX1d3Tov6BE2XDjIG0zFxLduJGbVwc/6rIc95
T055j36Ez0HrjxdpTGOOHxRqMK5m9flFbaxxtDnS7w77WqzW7HjFrD0VeTx2vnjj
GqchHEQpfDpFOzb8LTFhgYidyRNUflQY35WLOzLNV+pV3eQ3Jg11UFwelSNLqfQf
uFRGc+zcwkNjHh5yPvm9odR1BIfqJ6sKGPGbtPNXo7ERMRypWyRz0zi0twARAQAB
tChGZWRvcmEgRVBFTCAoNykgPGVwZWxAZmVkb3JhcHJvamVjdC5vcmc+iQI4BBMB
AgAiBQJSrmiEAhsPBgsJCAcDAgYVCAIJCgsEFgIDAQIeAQIXgAAKCRBqL66iNSxk
5cfGD/4spqpsTjtDM7qpytKLHKruZtvuWiqt5RfvT9ww9GUUFMZ4ZZGX4nUXg49q
ixDLayWR8ddG/s5kyOi3C0uX/6inzaYyRg+Bh70brqKUK14F1BrrPi29eaKfG+Gu
MFtXdBG2a7OtPmw3yuKmq9Epv6B0mP6E5KSdvSRSqJWtGcA6wRS/wDzXJENHp5re
9Ism3CYydpy0GLRA5wo4fPB5uLdUhLEUDvh2KK//fMjja3o0L+SNz8N0aDZyn5Ax
CU9RB3EHcTecFgoy5umRj99BZrebR1NO+4gBrivIfdvD4fJNfNBHXwhSH9ACGCNv
HnXVjHQF9iHWApKkRIeh8Fr2n5dtfJEF7SEX8GbX7FbsWo29kXMrVgNqHNyDnfAB
VoPubgQdtJZJkVZAkaHrMu8AytwT62Q4eNqmJI1aWbZQNI5jWYqc6RKuCK6/F99q
thFT9gJO17+yRuL6Uv2/vgzVR1RGdwVLKwlUjGPAjYflpCQwWMAASxiv9uPyYPHc
ErSrbRG0wjIfAR3vus1OSOx3xZHZpXFfmQTsDP7zVROLzV98R3JwFAxJ4/xqeON4
vCPFU6OsT3lWQ8w7il5ohY95wmujfr6lk89kEzJdOTzcn7DBbUru33CQMGKZ3Evt
RjsC7FDbL017qxS+ZVA/HGkyfiu4cpgV8VUnbql5eAZ+1Ll6Dw==
=hdPa
-----END PGP PUBLIC KEY BLOCK-----

28
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-EPEL-8
View File

@ -1,28 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----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=84m8
-----END PGP PUBLIC KEY BLOCK-----

30
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-FC27
View File

@ -1,30 +0,0 @@
pub 4096R/F5282EE4 2017-02-21 Fedora 27 (27) <fedora-27@fedoraproject.org>
-----BEGIN PGP PUBLIC KEY BLOCK-----
mQINBFiskqMBEADTbsoAXpDPk+FtcwBEPZQVe0YQYdOqavfQQVD/RYAcHnJW/K1b
ZhQusBjUIec9SfGi3uBNNmbziAvpd/ycMKyWHuWQLmBgbImrqnPbBPMXmxeNGnZj
A1hjVDp0pzj2+gZQhqYWSf6kQy9u9A1mSU63Kl/tfw7+hX7Tc3I8feGAFCHcFQgE
SxUib8Mw/OOGR3Am9fKdA+K1kJeQIiZvXMcNFx+3CfoavhFdicuoT2KbcSuzRm76
duKNHlLaP6/IbZxNiDWh8SDVpFaFPlqR/R/+wibA6e9wMf6CZ4vfUY7NKYf4tYBs
0EYdkn3j/KhJJxdb+M46Q/xwq9ovZo7XIhLrIUPuMw91X9cbvkU/a9kE1ffdpNmF
1fDnUcEkuuEqOl+aMVsUBEbAQ86yrwpDfL4XT9vwnDIkggKZyvDTZ6q00XKg3Ger
KuZtQBl/YcHDXuBlB1fzpGl8a8hq/+GeT2sVxjlYwPXjrsKd1NeP6ctQsR6gHuP3
W5ohP4rArtM6ONN8rlTiodDLVGHBpUzIRdgr7RCL1AqB9vrdQ2MVZMasTcUnUvKo
0H4mps+x05jGao0b0Z0TJc6wr6ybHH38NVG06VX5rJZlfZchGwkWzmYxai55/7ln
1vJmk+kbdS7pK0jfmeVJ8A77XLCL36oJFCiCrYjV+ZGgvB+z08Jzwc7sgwARAQAB
tCxGZWRvcmEgMjcgKDI3KSA8ZmVkb3JhLTI3QGZlZG9yYXByb2plY3Qub3JnPokC
OAQTAQIAIgUCWKySowIbDwYLCQgHAwIGFQgCCQoLBBYCAwECHgECF4AACgkQ9V50
MPUoLuTcww/+LFPVEyVguMeU/QABEsE5FEN7kcDReZtdwq7p/aKC29mzCxeHggit
YOGlrINkJ26Aq6p+oW6w7JxBWJnKoTBYJDFzNIbp/6GbG4oKcEnWQZfTnRLTr5au
kVdWBFevzC0huraobKz3joYRIX826VUzS/A418zpnDVPtpo3x86V9f292rqi2tn9
Q5cQC5Ck3/cjQDEwkN9gHz4j/c1oa6zBOcHbKkaZdWA2dIs6XOxCIHg78i6VQwMM
s+vfm2vbV3ACCcOVnd3d6NxIQuDLEQwdtdB2zI8R74bjacosrcafK+F2DnkM7WrL
SCiTKLJBMRDx+X2nOjT5pLuts4FC/XYRO23SMtPAMzQ852Z1lkjsaVDsjzNqCasU
B0vDPHLQE8aj0zchNBSzuHoKpXNYTyJztekWL/QXkUsXu0x7N5WhBlZ+lni6LtZU
51l7BJd1n+ZKnQ4gmjQ1ffVLbgzb9Z1MNje0s61FdKmUJQGULYqh32W4GV+RLvtI
6AJV/EmFCUEfRJ3eA8tJiyKe512wiim/WDhvzFuuPBup2Z3TufiaJQOysLlN5+HU
QitTtcd7j8ZgpsIAIZtSWOMxbIAJWbzn8gjfIj4ZDeo0ZZXH0VgDkXtpv1g8R2aR
Az6ob5YYW5VnI2UEr53x1Z7lmUhv/TUZn26IeU16jCJ80k7pJvQSF8Y=
=xpp1
-----END PGP PUBLIC KEY BLOCK-----

32
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-FC27-primary
View File

@ -1,32 +0,0 @@
pub 4096R/64DAB85D 2016-09-09 Fedora 26 Primary (26) <fedora-26-primary@fedoraproject.org>
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1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=DGPs
-----END PGP PUBLIC KEY BLOCK-----

55
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-FC27-second
View File

@ -1,55 +0,0 @@
pub 4096R/3B921D09 2016-08-08 Fedora 26 Secondary (26) <fedora-26-secondary@fedoraproject.org>
sub 2048g/5F6EB130 2016-08-08
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1
mQINBFeocJYBEAD0YKTqzt0QVgmHkRO0G8HpwdsNEzPANkDWe4KC1YnKTDjl4ojv
BfGc4bzLb+jXM4364DWGxArW6QJFW0DWI9DsK8+5TO+Zi9xtLi5BXKImw2cYh7HK
bCdNtBxT3xI1UVUuAkL8qbschWTUKgLYC1ywwjiFmjY7fEUpr3jzQrhYxazqN0Nv
R/lq9k3VAetXTRfOEOhUrIhrTRQnsK58rspF4nWqZTj6D8jkSGcQqs9D3/btbsx6
9QkFKIIfxvfZxIHccaYfJhjgNU75b4Zl6NQvRm0jB8jpFqMTvG7zvwubRiCku0YS
T+jy5RiZyaL5Yue0RP8dW0xfsVdRE7zsNaTRuvwVOBfXIFuGj81q0JrO7G5HW2Km
o2byOeqidPyrlFtJv1PfByUFKIZ530HM4mnVH8193ZbravjJCpj1Ye07cq0yy0Nt
2rvEpi63EYCBOaOQ9SJaYf77SZlZj/r7W2Hnnn40RqfzRUS3EAIucx1KtqNly5B4
zm56J8I9rPmqf/zfj+0/kGj8YRm8MP2+F7Se836PGF5d3zjazamcf0ORQmG67dwq
ddB+a5JhAxWl8OlFNsNBdRnu4qY3i6jK8jhI4U6NwQYEcWmnEeK5rbU20lEKPKla
+1bK5OlU02JINuS0iXyCMEYyLdheCRQVGXGADVgXy790nTb/IpGVmDj7lQARAQAB
tEBGZWRvcmEgMjYgU2Vjb25kYXJ5ICgyNikgPGZlZG9yYS0yNi1zZWNvbmRhcnlA
ZmVkb3JhcHJvamVjdC5vcmc+iQI4BBMBAgAiBQJXqHCWAhsPBgsJCAcDAgYVCAIJ
CgsEFgIDAQIeAQIXgAAKCRBFYP1NO5IdCWGXD/wOG5fluN233GHQsZ1WQneDaq/z
i/GyyNelbR5TVJhmZ/ifi51EGx4/w6ZdWokmVQ6UejatdeQCQhlFlF1g9Ax/oYoE
bdJVmFRP7HzXqWcENXnCSXcpha3C1N8g12a1B3qew0gbuRbhwnnzcDUQSSrcefS1
XpnhRmDUt7WanbWOWQ6kktYdAkfVd2/k/Y5nHUZp25mnjsNPbsffev6xTdUB4dVk
irBR4quMYwDXzzKKLz5E7pZB94C8WUCAYPOKM5pCuJR3L4pAjHGjUyrSSxAaCepf
iwJcCOQHMJY7CpuRqmhc1o3BaV8nO1HWMzbI78RChYshKCDY38Czh6SoeMJzaKUD
Asvz7tNhOl816s0dbtVw43Ngou7G7tOxmnI47AMNHBuBbA/qKRg6et96lWcjmJiS
1xks4FZFSEoA9BzH2G9o5LgYKKTRZIRPVZ61nsKa+as4E5oyDbXnUmnbanrfUvAL
L+vOYTEeFCB7qif2Ek58ujIQBLczmU+2S74pdQlu7kSYnrqNkkRxFOgFWt5udiOw
5R2vnUO2VAISDlUnkgyHp2SUnHAE2Q4StccvR9JeZUH9IuVioN/nAwzYTTKyOiZX
zipkxwznSjukiS4WPqdnLrTCNQ7WPpyygQDS/Z1DLt/+Rdxz4wkX76JjNVL+8hBF
07H2vzBvtkCoZXEQ17kCDQRXqHCWEAgA6UwG6HiPE0EY3UpaAJDQSibtS5zaId0H
8SXhdAk3ZVtzbskmI8FVuAyi6+Phl9Ps2RjVR88p9Uk6dV2QnRp8DpXQFeGfjMkf
okl5TmnGu5txXWMGdGeiAs/VlMzRuUZI05fJR6eeA8gn4wpBPmuXBgFre/3tuMxu
ahBLIhrLuThMMKZrfV42zaYN9waddnN+upM96aKQziNbmU7CSVGXK1wKtvbSF51B
XeO7w7KdTspKedjVLMhWrlUEAKmdeZDj+9slw4QXpqWMP8vmmIxbrYXm94r6IgYF
KYk1eZ2t8JbNdjFfRKGLKsPI2W9uH8+fI9/Xqw+mSwFMGqruBpmxZwADBQf/R2o8
TOghFlNt90wrfP0XaumUP+aZLvb6ndjESTS7PaX1R1wsHtPaVDWnaTgfA66rrCp/
66vmKf6uHlPeUx0RREaIJ56uKP3n0x8HDn1ZBba83NoriWdVqar6f3+UBoZ0u1GB
K/F8vG70Xj3x0dJ2psFP62yrDg5z+/TCM+o7EnUl5KYOpa3R25W6UEHoEexUIqxZ
p9+4FGH7+aO2LKbslEL3AVgraUBiFknJl7ikH3ZxljiFVigjBq/JN2F5CrmeAhdA
ZedF3lE/epQ+LSQ+TTN7ukGt2l37aJDTRGNHqe6KCy9KqIBr8XAaz9mJ34QF4hB/
tDUSGQP5eg93ecG5PokCHwQYAQIACQUCV6hwlgIbDAAKCRBFYP1NO5IdCQHSEAC4
g0BMaQu5qzLHeh/bFXtxT4vFucXLAenyLH+oIEo43crSUpjQiXzBitUc9sWMX7/m
jj8EWOGbIQNYZO712Ei7fPO7u/auZ7qIlVUKlEHZ+du1ORC5+khKrimgjP/ZIhTY
KHiIJD3BLs2rEGXdx3TQCYRIgRm066KKZ2gQy3YHngqipmOzvz9j4ctpmD6NabgX
3eWjUCzxofd3m67c6sQVKxUNQzujCgtaLIClYQEMO0E7Xq9auq9LOvD+40dLE63j
fYKSIvsQ+3qUmT0CEfk5K3GDYC30xQU4cvqCybOreSTQR0L/f/wUbTYt7Iyj/8eZ
wfi9wh2zVY2MOoe2zT6XIW2oKJFD9ka7IZsezMR4PBhEGCg69uWbPXbwIP3har1p
zIrwR1Uto9qCosupnkz3+ILQOiGxY5vtKXUr/0ulQ3gjZiLNL12m5MvnAUg4aoms
0W76wYUQG/NnccBzKE9hUAlgSak8n0gZPSRbG0wjOIcbE/arSpQ2k8WkwxkcUuHf
OnBq/2ME1njWkNp+h+F/ifZcwcBiRNZ+S8Y/kV2kh36pjkic4mCc4JjoNLxMic3J
pbf15Q8X0mgDbp1RVPtm4QTagq3kXRGjFpVaUfJF6ZdzPBm5qJ6F7ZX9p/av2zCp
Aw7ZjY7u8pfCZttaiaHYd6KYgPX5LEQK5QSTxy/JNA==
=P9ev
-----END PGP PUBLIC KEY BLOCK-----

30
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-FC28
View File

@ -1,30 +0,0 @@
pub 4096R/9DB62FB1 2017-08-14 Fedora 28 (28) <fedora-28@fedoraproject.org>
-----BEGIN PGP PUBLIC KEY BLOCK-----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=fo1W
-----END PGP PUBLIC KEY BLOCK-----

30
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-FC29
View File

@ -1,30 +0,0 @@
pub 4096R/429476B4 2018-02-17 Fedora 29 (29) <fedora-29@fedoraproject.org>
-----BEGIN PGP PUBLIC KEY BLOCK-----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=QzSY
-----END PGP PUBLIC KEY BLOCK-----

21
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-PAAS-SIG
View File

@ -1,21 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v2.0.22 (GNU/Linux)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=CVSF
-----END PGP PUBLIC KEY BLOCK-----

28
centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-cern
View File

@ -1,28 +0,0 @@
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1.2.6 (GNU/Linux)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=IUD3
-----END PGP PUBLIC KEY BLOCK-----

20
centos-mirror-tools/show_imported_rpm_gpg_keys.sh
View File

@ -1,20 +0,0 @@
echo "!! This script dumps all GPG keys added by \"rpm --import\"."
echo "!! it also lists out all keys' fingerprints, so that you can "
echo "!! cross-check with info at \"https://www.centos.org/keys/\""
echo ""
echo "-------------------- Start ----------------------------"
all_imported_keys="./all_imported_keys.txt"
echo "dump imported keys into $all_imported_keys"
# dump all RPM GPG keys we've already imported.
rpm -qi gpg-pubkey-\* > $all_imported_keys
# list fingerprint for each of keys we've imported
all_keys="`find /etc/pki/rpm-gpg -type f -name "RPM-GPG-KEY*"`"
for key in $all_keys;do
gpg --quiet --with-fingerprint $key
done
echo "-------------------- Done ----------------------------"

400
centos-mirror-tools/starlingx_add_pkgs.sh
View File

@ -1,400 +0,0 @@
#!/bin/bash
#
# Copyright (c) 2018 Wind River Systems, Inc.
#
# SPDX-License-Identifier: Apache-2.0
#
# This utility is a workflow aid for designers adding packages to StarlingX.
# It will identify and download dependencies, as needed.
#
# See help text for more details (-h)
#
# Example usage:
#
# Downloading multiple missing pkgs (whose dependencies happen to be met already):
#
# $ time starlingx_add_pkgs.sh -d python-srpm-macros -d python-rpm-macros -d python2-rpm-macros -d cppcheck -d ima-evm-utils -d ima-evm-utils-devel
# Downloading https://dl.fedoraproject.org/pub/epel/testing/7/x86_64//Packages/p/python-srpm-macros-3-22.el7.noarch.rpm
# Downloading https://dl.fedoraproject.org/pub/epel/testing/7/x86_64//Packages/p/python-rpm-macros-3-22.el7.noarch.rpm
# Downloading https://dl.fedoraproject.org/pub/epel/testing/7/x86_64//Packages/p/python2-rpm-macros-3-22.el7.noarch.rpm
# Downloading https://dl.fedoraproject.org/pub/epel/7/x86_64//Packages/c/cppcheck-1.83-3.el7.x86_64.rpm
# Downloading http://mirror.centos.org/centos/7.5.1804/os/x86_64//Packages/ima-evm-utils-1.1-2.el7.x86_64.rpm
# Downloading http://mirror.centos.org/centos/7.5.1804/os/x86_64//Packages/ima-evm-utils-devel-1.1-2.el7.x86_64.rpm
#
# real 1m44.437s
# user 2m23.055s
# sys 0m13.158s
#
#
# Or an example of a package with dependencies to be downloaded:
# $ time starlingx_add_pkgs.sh -d corosync
# Downloading http://mirror.centos.org/centos/7.5.1804/updates/x86_64//Packages/corosync-2.4.3-2.el7_5.1.x86_64.rpm
# Downloading http://mirror.centos.org/centos/7.5.1804/updates/x86_64//Packages/net-snmp-libs-5.7.2-33.el7_5.2.x86_64.rpm
# Downloading http://mirror.centos.org/centos/7.5.1804/os/x86_64//Packages/libqb-1.0.1-6.el7.x86_64.rpm
#
# real 1m1.419s
# user 1m20.585s
# sys 0m7.662s
# $ cat downloaded.log
# corosync-0:2.4.3-2.el7_5.1.x86_64,Starlingx-C7.5.1804-updates,http://mirror.centos.org/centos/7.5.1804/updates/x86_64//Packages/corosync-2.4.3-2.el7_5.1.x86_64.rpm
# net-snmp-libs,Starlingx-C7.5.1804-updates,http://mirror.centos.org/centos/7.5.1804/updates/x86_64//Packages/net-snmp-libs-5.7.2-33.el7_5.2.x86_64.rpm
# libqb,Starlingx-C7.5.1804-os,http://mirror.centos.org/centos/7.5.1804/os/x86_64//Packages/libqb-1.0.1-6.el7.x86_64.rpm
#
#
# Or searching for the elusive “scapy” package (I added StarlingX_3rd.repo support):
# $ time starlingx_add_pkgs.sh -d scapy
# Downloading http://epel.blizoo.mk/epel/7Server/x86_64/s/scapy-2.2.0-2.el7.noarch.rpm
#
# real 0m16.112s
# user 0m22.000s
# sys 0m1.702s
# $ cat downloaded_3rd.log
# scapy-0:2.2.0-2.el7.noarch,Starlingx-epel.blizoo.mk_epel_7Server_x86_64,http://epel.blizoo.mk/epel/7Server/x86_64/s/scapy-2.2.0-2.el7.noarch.rpm
#
# Looking for a specific version?
# $ time starlingx_add_pkgs.sh -d scapy-2.3.1
# Failed to find a package providing scapy-2.3.1
# Could not find in repo: scapy-2.3.1
#
# real 0m2.003s
# user 0m1.736s
# sys 0m0.265s
# $ time starlingx_add_pkgs.sh -d scapy-2.2.0
# Failed to find a package providing scapy-2.2.0
# Downloading http://epel.blizoo.mk/epel/7Server/x86_64/s/scapy-2.2.0-2.el7.noarch.rpm
#
# real 0m15.748s
# user 0m21.834s
# sys 0m1.760s
#
# Note: It may seem odd to see “Failed to find a package providing scapy-2.2.0”,
# followed by a “Downloading”, but that’s because of the way the script and
# repoquery work. It first treats the specified string as a “feature” or “capability”
# and looks for the package that provides it (for resolving dependencies). It then
# looks for the pkg, if that mapping failed.
#
if [ -z "$MY_REPO" ]; then
echo "Required environment variable undefined: MY_REPO" >&2
exit 1
fi
if [ -z "$MY_REPO_ROOT_DIR" ]; then
echo "Required environment variable undefined: MY_REPO_ROOT_DIR" >&2
exit 1
fi
STARLINGX_ADD_PKGS_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
source $STARLINGX_ADD_PKGS_DIR/../toCOPY/lst_utils.sh || exit 1
source $STARLINGX_ADD_PKGS_DIR/utils.sh || exit 1
STXTOOLS=${MY_REPO_ROOT_DIR}/stx-tools
LOCALREPO_PATH=$MY_REPO/centos-repo/Binary
STDREPO_PATH=$MY_WORKSPACE/std/rpmbuild/RPMS
STDREPO_PATH_ARGS=
if [ -e $STDREPO_PATH/repodata/repomd.xml ]; then
STDREPO_PATH_ARGS="--repofrompath tis,$STDREPO_PATH"
fi
RESULTS_LOG=downloaded.log
RESULTS_3RD_LOG=downloaded_3rd.log
NOTFOUND_LOG=notfound.log
FAILED_LOG=failed.log
RPMLIST=
DOWNLOAD_LIST=
function cleanup {
rm -f $REPOCFG_STD_MERGED $REPOCFG_3RD_MERGED $REPOCFG_LOWER_LAYER_MERGED $REPOCFG_ALL_MERGED
}
trap cleanup EXIT
function show_usage {
cat >&2 <<EOF
Usage:
$(basename $0) [ -C <config_dir> ] [ -l <layer> ] [ -d <pkgname> ] ... [ <rpmfile> ] ...
This utility uses the centos-repo repo, and optionally the rpmbuild/RPMS
repo from \$MY_WORKSPACE/std, as a baseline, downloading packages required
to support the list provided at command-line. The -d option allows the user to
specify a package to download, or the user can specify a downloaded RPM file
that has dependencies that must be downloaded.
The downloaded RPMs will be written to the appropriate location under the
\$MY_REPO/centos-repo directory. The user should be able to differentiate
the downloaded files versus symlinks pointing to a downloaded or shared mirror.
In addition, this utility will record a list of downloaded RPMs in the $RESULTS_LOG
or $RESULTS_3RD_LOG files, with failures recorded in $FAILED_LOG or $NOTFOUND_LOG.
The resulting download list can then be added to the appropriate .lst file in
\$MY_REPO_ROOT_DIR/stx-tools/centos-mirror-tools/config/centos/flock/
Example:
$(basename $0) -d linuxptp -d zlib puppet-gnocchi-11.3.0-1.el7.src.rpm
Download packages linuxptp and zlib and their depdencies, as needed.
Download dependencies of puppet-gnocchi-11.3.0-1.el7.src.rpm, as needed.
EOF
exit 1
}
while getopts "C:d:l:h" opt; do
case $opt in
C)
# Alternate config directory
set_and_validate_config_dir "${OPTARG}"
;;
d)
DOWNLOAD_LIST="$DOWNLOAD_LIST $OPTARG"
;;
l)
# Set layer
set_and_validate_layer "${OPTARG}"
;;
h)
show_usage
;;
*)
echo "Unsupported option" >&2
show_usage
;;
esac
done
shift $((OPTIND-1))
RPMLIST="${RPMLIST} $@"
REPO_DIR=${STXTOOLS}/centos-mirror-tools/yum.repos.d
LAYER_REPO_DIR=${config_dir}/centos/${layer}/yum.repos.d
REPOCFG_STD_FILES=$(ls ${REPO_DIR}/StarlingX*.repo | grep -v StarlingX_3rd)
REPOCFG_3RD_FILES=${REPO_DIR}/StarlingX_3rd*.repo
REPOCFG_LOWER_LAYER_FILES=""
if [ -d ${LAYER_REPO_DIR} ]; then
REPOCFG_LOWER_LAYER_FILES=${LAYER_REPO_DIR}/StarlingX*.repo
fi
REPOCFG_STD_MERGED=$(mktemp /tmp/REPOCFG_STD_MERGED_XXXXXX)
cat $REPOCFG_STD_FILES > $REPOCFG_STD_MERGED
REPOCFG_3RD_MERGED=$(mktemp /tmp/REPOCFG_3RD_MERGED_XXXXXX)
cat $REPOCFG_3RD_FILES > $REPOCFG_3RD_MERGED
REPOCFG_LOWER_LAYER_MERGED=$(mktemp /tmp/REPOCFG_LOWER_LAYER_MERGED_XXXXXX)
if [ "$REPOCFG_LOWER_LAYER_FILES" != "" ]; then
cat $REPOCFG_LOWER_LAYER_FILES > $REPOCFG_LOWER_LAYER_MERGED
fi
REPOCFG_ALL_MERGED=$(mktemp /tmp/REPOCFG_ALL_MERGED_XXXXXX)
cat $REPOCFG_STD_FILES $REPOCFG_3RD_FILES $REPOCFG_LOWER_LAYER_FILES > $REPOCFG_ALL_MERGED
# It seems we have to manually disable the repos from /etc/yum.repos.d,
# even though we're specifying a config file
REPOQUERY_ARGS=$(grep -h '^\[' /etc/yum.repos.d/* | sed 's/[][]//g' | sed 's/^/--disablerepo=/')
REPOQUERY_CMD="repoquery --archlist=x86_64,noarch $REPOQUERY_ARGS"
REPOQUERY_STD_CMD="$REPOQUERY_CMD --quiet -c $REPOCFG_STD_MERGED"
REPOQUERY_3RD_CMD="$REPOQUERY_CMD --quiet -c $REPOCFG_3RD_MERGED"
REPOQUERY_LOWER_LAYER_CMD="$REPOQUERY_CMD --quiet -c $REPOCFG_LOWER_LAYER_MERGED"
REPOQUERY_ALL_CMD="$REPOQUERY_CMD --quiet -c $REPOCFG_ALL_MERGED"
REPOQUERY_LOCAL_CMD="$REPOQUERY_CMD --quiet --repofrompath local,$LOCALREPO_PATH $STDREPO_PATH_ARGS"
function rpmfile_requires {
#
# Map a specified rpm file to its dependency list
#
local rpmfile=$1
# Never process rpmlib(*) requirements.
# They are not regular requirements, but rather internal features of rpm.
rpm -qp --requires $rpmfile | grep -v '^rpmlib[(]'
}
function feature_to_pkg {
#
# Map a feature/capability to the package that provides it
#
local feature="$1"
local pkg=
pkg=$($REPOQUERY_LOCAL_CMD "$feature" | head -1)
if [ -z $pkg ]; then
pkg=$($REPOQUERY_LOCAL_CMD --qf='%{name}' --whatprovides "$feature" | head -1)
if [ -z $pkg ]; then
pkg=$($REPOQUERY_LOWER_LAYER_CMD "$feature" | head -1)
if [ -z $pkg ]; then
pkg=$($REPOQUERY_LOWER_LAYER_CMD --qf='%{name}' --whatprovides "$feature" | head -1)
if [ -z $pkg ]; then
pkg=$($REPOQUERY_STD_CMD "$feature" | head -1)
if [ -z $pkg ]; then
pkg=$($REPOQUERY_STD_CMD --qf='%{name}' --whatprovides "$feature" | head -1)
if [ -z $pkg ]; then
pkg=$($REPOQUERY_3RD_CMD "$feature" | head -1)
if [ -z $pkg ]; then
pkg=$($REPOQUERY_3RD_CMD --qf='%{name}' --whatprovides "$feature" | head -1)
if [ -z "$pkg" ]; then
echo "Could not find in repo: $feature" >&2
echo "Could not find in repo: $feature" >> $NOTFOUND_LOG
fi
fi
fi
fi
fi
fi
fi
fi
echo $pkg
}
function pkg_to_dependencies {
#
# Map a package to the list of packages it requires
#
local pkg=$1
$REPOQUERY_ALL_CMD --resolve --requires --qf='%{name}' $pkg
}
function simplified_pkg {
#
# drop the epoch
#
local pkg=$1
echo $pkg | sed 's/-[0-9]*:/-/'
}
function pkg_in_localrepo {
#
# Check whether the specified package is already in the downloaded (or built) repo
#
local pkg=$1
local results=
results=$($REPOQUERY_LOCAL_CMD --whatprovides $pkg)
if [ -n "$results" ]; then
results=$($REPOQUERY_LOCAL_CMD $(simplified_pkg $pkg))
if [ -n "$results" ]; then
return 0
fi
fi
local pkgname=
pkgname=$($REPOQUERY_ALL_CMD --quiet $REPOCFG_ARGS --qf='%{name}' --whatprovides $pkg | head -1)
if [ -z "$pkgname" ]; then
pkgname=$($REPOQUERY_ALL_CMD --quiet $REPOCFG_ARGS --qf='%{name}' $(simplified_pkg $pkg) | head -1)
if [ -z "$pkgname" ]; then
echo "Failed to find a package providing $pkg" >&2
return 1
fi
fi
results=$($REPOQUERY_LOCAL_CMD $pkgname)
test -n "$results"
}
function download_pkg {
#
# Download the specified package and its dependencies
#
local feature="$1"
local pkg=
pkg=$(feature_to_pkg "$feature")
if [ -z "$pkg" ]; then
# Error should already be to stderr
return 1
fi
local repoid=
local url=
local relativepath=
local arch=
local deps=
local rpm_path=
repoid=$($REPOQUERY_STD_CMD --qf='%{repoid}' $pkg | head -1)
if [ -n "$repoid" ]; then
url=$($REPOQUERY_STD_CMD --location $pkg | head -1)
relativepath=$($REPOQUERY_STD_CMD --qf='%{relativepath}' $pkg | head -1)
arch=$($REPOQUERY_STD_CMD --qf='%{arch}' $pkg | head -1)
LOG=$RESULTS_LOG
else
repoid=$($REPOQUERY_3RD_CMD --qf='%{repoid}' $pkg | head -1)
url=$($REPOQUERY_3RD_CMD --location $pkg | head -1)
relativepath=$($REPOQUERY_3RD_CMD --qf='%{relativepath}' $pkg | head -1)
arch=$($REPOQUERY_3RD_CMD --qf='%{arch}' $pkg | head -1)
LOG=$RESULTS_3RD_LOG
fi
echo "Downloading $url"
rpm_path=$LOCALREPO_PATH/$arch/$(basename $relativepath)
download_file --quiet "$url" "$rpm_path"
if [ $? -ne 0 ]; then
echo "Failed to download $url" >&2
echo "Failed to download $url" >>$FAILED_LOG
return 1
fi
# Update repo
pushd $LOCALREPO_PATH >/dev/null
createrepo -q -g comps.xml .
if [ $? -ne 0 ]; then
echo "createrepo failed... Aborting" >&2
exit 1
fi
popd >/dev/null
# Log it to appropriate file
echo "${pkg},${repoid},$url" >> $LOG
# Now check its dependencies
download_rpm_dependencies $rpm_path
}
function download_rpm_dependencies {
local rf=$1
rpmfile_requires $rf | while read feature; do
local pkg=
pkg=$(feature_to_pkg "$feature")
if [ -z "$pkg" ]; then
# Already msged to stderr
continue
fi
pkg_in_localrepo $pkg && continue
download_pkg $pkg
done || exit $?
}
if [ -n "$RPMLIST" ]; then
for rf in $RPMLIST; do
rpmfile_requires $rf | while read feature; do
pkg=$(feature_to_pkg "$feature")
if [ -z "$pkg" ]; then
# Already msged to stderr
continue
fi
pkg_in_localrepo $pkg && continue
download_pkg $pkg
done || exit $?
done
fi
if [ -n "$DOWNLOAD_LIST" ]; then
for df in $DOWNLOAD_LIST; do
pkg_in_localrepo $df && continue
download_pkg $df
done
fi

214
centos-mirror-tools/stx_mirror_scripts/dl_sync.sh
View File

@ -1,214 +0,0 @@
#!/bin/bash
#
# SPDX-License-Identifier: Apache-2.0
#
# Update script for mirror.starlingx.windriver.com covering
# tarballs and other files not downloaded from a yum repository.
# The list of files to download are pulled from the .lst files
# found in the stx-tools repo.
#
# IMPORTANT: This script is only to be run on the StarlingX mirror.
# It is not for use by the general StarlinX developer.
#
# This script was originated by Scott Little.
#
DAILY_DL_SYNC_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
LOGFILE=/export/log/daily_dl_sync.log
DOWNLOAD_PATH_ROOT=/export/mirror/centos
STX_TOOLS_BRANCH="master"
STX_TOOLS_BRANCH_ROOT_DIR="$HOME/stx-tools"
STX_TOOLS_OS_SUBDIR="centos-mirror-tools"
if [ -f "$DAILY_DL_SYNC_DIR/stx_tool_utils.sh" ]; then
source "$DAILY_DL_SYNC_DIR/stx_tool_utils.sh"
elif [ -f "$DAILY_DL_SYNC_DIR/../stx_tool_utils.sh" ]; then
source "$DAILY_DL_SYNC_DIR/../stx_tool_utils.sh"
else
echo "Error: Can't find 'stx_tool_utils.sh'"
exit 1
fi
usage () {
echo "$0 [-b <branch>] [-d <dir>]"
echo ""
echo "Options:"
echo " -b: Use an alternate branch of stx-tools. Default is 'master'."
echo " -d: Directory where we will clone stx-tools. Default is \$HOME."
echo ""
}
while getopts "b:d:h" opt; do
case "${opt}" in
b)
# branch
STX_TOOLS_BRANCH="${OPTARG}"
if [ $"STX_TOOLS_BRANCH" == "" ]; then
usage
exit 1
fi
;;
d)
# download directory for stx-tools
STX_TOOLS_BRANCH_ROOT_DIR="${OPTARG}"
if [ "$STX_TOOLS_BRANCH_ROOT_DIR" == "" ]; then
usage
exit 1
fi
;;
h)
# Help
usage
exit 0
;;
*)
usage
exit 1
;;
esac
done
STX_TOOLS_DL_ROOT_DIR="$STX_TOOLS_BRANCH_ROOT_DIR/$STX_TOOLS_BRANCH"
STX_TOOLS_DL_DIR="$STX_TOOLS_DL_ROOT_DIR/stx-tools"
LST_FILE_DIR="$STX_TOOLS_DL_DIR/$STX_TOOLS_OS_SUBDIR"
raw_dl_from_rpm_lst () {
local FILE="$1"
local RPM=""
local URL=""
local ERROR_COUNT=0
# Expected format <rpm>#<url>
grep -v '^#' $FILE | while IFS='#' read -r RPM URL; do
echo "Processing: RPM=$RPM URL=$URL"
dl_file_from_url "$URL"
ERR_COUNT=$((ERR_COUNT+$?))
done
return $ERR_COUNT
}
raw_dl_from_non_rpm_lst () {
local FILE="$1"
local TAR=""
local URL=""
local METHOD=""
local UTIL=""
local SCRIPT=""
local BRANCH=""
local SUBDIRS_FILE=""
local TARBALL_NAME=""
local ERROR_COUNT=0
# Expected format <tar-file>#<tar-dir>#<url>
# or !<tar-file>#<tar-dir>#<url>#<method>#[<util>]#[<script>]
grep -v '^#' $FILE | while IFS='#' read -r TAR DIR URL METHOD UTIL SCRIPT; do
if [ "$URL" == "" ]; then
continue
fi
echo "Processing: TAR=$TAR DIR=$DIR URL=$URL METHOD=$METHOD UTIL=$UTIL SCRIPT=$SCRIPT"
TARBALL_NAME="${TAR//!/}"
if [[ "$TAR" =~ ^'!' ]]; then
case $METHOD in
http|http_script)
dl_file_from_url "$URL"
if [ $? -ne 0 ]; then
echo "Error: Failed to download '$URL' while processing '$TARBALL_NAME'"
ERR_COUNT=$((ERR_COUNT+1))
fi
;;
http_filelist|http_filelist_script)
SUBDIRS_FILE="$LST_FILE_DIR/$UTIL"
if [ ! -f "$SUBDIRS_FILE" ]; then
echo "$SUBDIRS_FILE no found" 1>&2
ERR_COUNT=$((ERR_COUNT+1))
fi
grep -v '^#' "$SUBDIRS_FILE" | while read -r ARTF; do
if [ "$ARTF" == "" ]; then
continue
fi
dl_file_from_url "$URL/$ARTF"
if [ $? -ne 0 ]; then
echo "Error: Failed to download artifact '$ARTF' from list '$SUBDIRS_FILE' while processing '$TARBALL_NAME'"
ERR_COUNT=$((ERR_COUNT+1))
break
fi
done
;;
git|git_script)
BRANCH="$UTIL"
dl_bare_git_from_url "$URL" ""
if [ $? -ne 0 ]; then
echo "Error: Failed to download '$URL' while processing '$TARBALL_NAME'"
ERR_COUNT=$((ERR_COUNT+1))
fi
;;
*)
echo "Error: Unknown method '$METHOD' while processing '$TARBALL_NAME'"
ERR_COUNT=$((ERR_COUNT+1))
;;
esac
else
dl_file_from_url "$URL"
if [ $? -ne 0 ]; then
echo "Error: Failed to download '$URL' while processing '$TARBALL_NAME'"
ERR_COUNT=$((ERR_COUNT+1))
fi
fi
done
return $ERR_COUNT
}
if [ -f $LOGFILE ]; then
rm -f $LOGFILE
fi
(
ERR_COUNT=0
stx_tool_clone_or_update "$STX_TOOLS_BRANCH" "$STX_TOOLS_DL_ROOT_DIR"
if [ $? -ne 0 ]; then
echo "Error: Failed to update stx_tools. Can't continue."
exit 1
fi
# At time of writing, only expect rpms_3rdparties.lst
RPM_LST_FILES=$(grep -l '://' $LST_FILE_DIR/rpms*.lst)
# At time of writing, only expect tarball-dl.lst
NON_RPM_FILES=$(grep -l '://' $LST_FILE_DIR/*lst | grep -v '[/]rpms[^/]*$')
for RPM_LST_FILE in $RPM_LST_FILES; do
raw_dl_from_rpm_lst "$RPM_LST_FILE"
ERR_COUNT=$((ERR_COUNT+$?))
done
for NON_RPM_FILE in $NON_RPM_FILES; do
raw_dl_from_non_rpm_lst "$NON_RPM_FILE"
ERR_COUNT=$((ERR_COUNT+$?))
done
if [ $ERR_COUNT -ne 0 ]; then
echo "Error: Failed to download $ERR_COUNT files"
exit 1
fi
exit 0
) | tee $LOGFILE
exit ${PIPESTATUS[0]}

279
centos-mirror-tools/stx_mirror_scripts/dl_utils.sh
View File

@ -1,279 +0,0 @@
#
# SPDX-License-Identifier: Apache-2.0
#
# Utility function for the download of gits and tarballs.
#
# This script was originated by Scott Little.
#
DL_UTILS_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
if [ -f "$DL_UTILS_DIR/utils.sh" ]; then
source "$DL_UTILS_DIR/utils.sh"
elif [ -f "$DL_UTILS_DIR/../utils.sh" ]; then
source "$DL_UTILS_DIR/../utils.sh"
else
echo "Error: Can't find 'utils.sh'"
exit 1
fi
DOWNLOAD_PATH_ROOT=${DOWNLOAD_PATH_ROOT:-/export/mirror/centos}
#
# dl_git_from_url <git-url> <branch> <dir>
#
# Download a git from supplied url into directory,
# and checkout desired branch.
#
dl_git_from_url () {
local GIT_URL="$1"
local BRANCH="$2"
local DL_DIR="$3"
local DL_ROOT_DIR=""
local SAVE_DIR
local CMD=""
SAVE_DIR="$(pwd)"
if [ "$DL_DIR" == "" ]; then
DL_DIR="$DOWNLOAD_PATH_ROOT/$(repo_url_to_sub_path "$GIT_URL" | sed 's#[.]git$##')"
fi
echo "dl_git_from_url GIT_URL='$GIT_URL' BRANCH='$BRANCH' DL_DIR='$DL_DIR'"
DL_ROOT_DIR=$(dirname "$DL_DIR")
if [ ! -d "$DL_DIR" ]; then
if [ ! -d "$DL_ROOT_DIR" ]; then
CMD="mkdir -p '$DL_ROOT_DIR'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
fi
CMD="cd '$DL_ROOT_DIR'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
CMD="git clone '$GIT_URL' '$DL_DIR'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
fi
CMD="cd '$DL_DIR'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
CMD="git fetch"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
CMD="git checkout '$BRANCH'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
CMD="git pull"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
cd "$SAVE_DIR"
return 0
}
#
# dl_bare_git_from_url <git-url> <dir>
#
# Download a bare git from supplied url into desired directory.
#
dl_bare_git_from_url () {
local GIT_URL="$1"
local DL_DIR="$2"
local DL_ROOT_DIR=""
local SAVE_DIR
local CMD=""
SAVE_DIR="$(pwd)"
if [ "$DL_DIR" == "" ]; then
DL_DIR="$DOWNLOAD_PATH_ROOT/$(repo_url_to_sub_path "$GIT_URL" | sed 's#[.]git$##')"
fi
echo "dl_bare_git_from_url GIT_URL='$GIT_URL' DL_DIR='$DL_DIR'"
DL_ROOT_DIR=$(dirname "$DL_DIR")
if [ ! -d "$DL_DIR" ]; then
if [ ! -d "$DL_ROOT_DIR" ]; then
CMD="mkdir -p '$DL_ROOT_DIR'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
fi
CMD="cd '$DL_ROOT_DIR'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
CMD="git clone --bare '$GIT_URL' '$DL_DIR'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
CMD="cd '$DL_DIR'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
CMD="git --bare update-server-info"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
if [ -f hooks/post-update.sample ]; then
CMD="mv -f hooks/post-update.sample hooks/post-update"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
fi
fi
CMD="cd '$DL_DIR'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
CMD="git fetch"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
cd "$SAVE_DIR"
return 1
fi
cd "$SAVE_DIR"
return 0
}
#
# dl_file_from_url <url>
#
# Download a file to the current directory
#
dl_file_from_url () {
local URL="$1"
local DOWNLOAD_PATH=""
local DOWNLOAD_DIR=""
local PROTOCOL=""
local CMD=""
DOWNLOAD_PATH="$DOWNLOAD_PATH_ROOT/$(repo_url_to_sub_path "$URL")"
DOWNLOAD_DIR="$(dirname "$DOWNLOAD_PATH")"
PROTOCOL=$(url_protocol $URL)
echo "$PROTOCOL $URL $DOWNLOAD_PATH"
if [ -f "$DOWNLOAD_PATH" ]; then
echo "Already have '$DOWNLOAD_PATH'"
return 0
fi
case "$PROTOCOL" in
https|http)
if [ ! -d "$DOWNLOAD_DIR" ]; then
CMD="mkdir -p '$DOWNLOAD_DIR'"
echo "$CMD"
eval "$CMD"
if [ $? -ne 0 ]; then
echo "Error: $CMD"
return 1
fi
fi
CMD="$(get_download_file_command $URL $DOWNLOAD_PATH.dl_part)"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
\rm -f "$DOWNLOAD_PATH.dl_part"
echo "Error: $CMD"
return 1
fi
\mv -fT "$DOWNLOAD_PATH.dl_part" "$DOWNLOAD_PATH"
;;
*)
echo "Error: Unknown protocol '$PROTOCOL' for url '$URL'"
return 1
;;
esac
return 0
}

130
centos-mirror-tools/stx_mirror_scripts/repo_sync.sh
View File

@ -1,130 +0,0 @@
#!/bin/bash
#
# SPDX-License-Identifier: Apache-2.0
#
# Update script for mirror.starlingx.windriver.com covering
# rpms and src.rpms downloaded from a yum repository.
#
# IMPORTANT: This script is only to be run on the StarlingX mirror.
# It is not for use by the general StarlinX developer.
#
# Configuration files for repositories to be downloaded are currently
# stored at mirror.starlingx.windriver.com:/export/config/yum.repos.d.
# Those repos were derived from those found in
# stx-tools/centos-mirror-tools/yum.repos.d with some modifications.
#
# It is recommended that repo_update.sh be run prior to this script
# to ensure /export/config/yum.repos.d is kept current.
#
# This script was originated by Scott Little.
#
LOGFILE="/export/log/daily_repo_sync.log"
YUM_CONF_DIR="/export/config"
YUM_REPOS_DIR="$YUM_CONF_DIR/yum.repos.d"
DOWNLOAD_PATH_ROOT="/export/mirror/centos"
URL_UTILS="url_utils.sh"
DAILY_REPO_SYNC_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
if [ -f "$DAILY_REPO_SYNC_DIR/$URL_UTILS" ]; then
source "$DAILY_REPO_SYNC_DIR/$URL_UTILS"
elif [ -f "$DAILY_REPO_SYNC_DIR/../$URL_UTILS" ]; then
source "$DAILY_REPO_SYNC_DIR/../$URL_UTILS"
else
echo "Error: Can't find '$URL_UTILS'"
exit 1
fi
CREATEREPO=$(which createrepo_c)
if [ $? -ne 0 ]; then
CREATEREPO="createrepo"
fi
number_of_cpus () {
/usr/bin/nproc
}
if [ -f $LOGFILE ]; then
rm -f $LOGFILE
fi
ERR_COUNT=0
YUM_CONF="$YUM_CONF_DIR/yum.conf"
if [ ! -f "$YUM_CONF" ]; then
echo "Error: Missing yum.conf file at '$YUM_CONF'"
exit 1
fi
for REPO_ID in $(yum repolist --config="$YUM_CONF" --quiet | tail -n +2 | cut -d ' ' -f 1); do
REPO_URL=$(yum repoinfo --config="$YUM_CONF" --disablerepo="*" --enablerepo="$REPO_ID" | grep Repo-baseurl | cut -d ' ' -f 3)
DOWNLOAD_PATH="$DOWNLOAD_PATH_ROOT/$(repo_url_to_sub_path "$REPO_URL")"
echo "Processing: REPO_ID=$REPO_ID REPO_URL=$REPO_URL DOWNLOAD_PATH=$DOWNLOAD_PATH"
# Assume it's a repo of binary rpms unless repoid ends in
# some variation of 'source'.
SOURCE_FLAG=""
echo "$REPO_ID" | grep -q '[-_][Ss]ource$' && SOURCE_FLAG="--source"
echo "$REPO_ID" | grep -q '[-_][Ss]ources$' && SOURCE_FLAG="--source"
echo "$REPO_ID" | grep -q '[-_][Ss]ource[-_]' && SOURCE_FLAG="--source"
echo "$REPO_ID" | grep -q '[-_][Ss]ources[-_]' && SOURCE_FLAG="--source"
if [ ! -d "$DOWNLOAD_PATH" ]; then
CMD="mkdir -p '$DOWNLOAD_PATH'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
ERR_COUNT=$((ERR_COUNT+1))
continue
fi
fi
CMD="reposync --norepopath $SOURCE_FLAG -l --config=$YUM_CONF --repoid=$REPO_ID --download_path='$DOWNLOAD_PATH'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
ERR_COUNT=$((ERR_COUNT+1))
continue
fi
CMD="pushd '$DOWNLOAD_PATH'"
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
ERR_COUNT=$((ERR_COUNT+1))
continue
fi
OPTIONS="--workers $(number_of_cpus)"
if [ -f comps.xml ]; then
OPTIONS="$OPTIONS -g comps.xml"
fi
if [ -d repodata ]; then
OPTIONS="$OPTIONS --update"
fi
CMD="$CREATEREPO $OPTIONS ."
echo "$CMD"
eval $CMD
if [ $? -ne 0 ]; then
echo "Error: $CMD"
ERR_COUNT=$((ERR_COUNT+1))
popd
continue
fi
popd
done | tee $LOGFILE
echo ERR_COUNT=$ERR_COUNT
if [ $ERR_COUNT -ne 0 ]; then
exit 1
fi
exit 0

409
centos-mirror-tools/stx_mirror_scripts/repo_update.sh
View File

@ -1,409 +0,0 @@
#!/bin/bash
#
# SPDX-License-Identifier: Apache-2.0
#
# Update script for mirror.starlingx.windriver.com covering
# yum.repos.d.
#
# IMPORTANT: This script is only to be run on the StarlingX mirror.
# It is not for use by the general StarlinX developer.
#
# Configuration files for repositories to be downloaded are currently
# stored at mirror.starlingx.windriver.com:/export/config/yum.repos.d/
# and /export/config/rpm-gpg-keys. These configuration files need
# to be updated periodically to reflect changes made to
# stx-tools/centos-mirror-tools/yum.repos.d/ and
# stx-tools/centos-mirror-tools/rpm-gpg-keys/.
# The update are additive in nature, mirror.starlingx.windriver.com
# does not delete keys or repos. At worst we will rename a
# repo if it's url has changed.
#
# This script was originated by Scott Little.
#
LOGFILE="/export/log/repo_update.log"
YUM_CONF_DIR="/export/config"
# YUM_CONF_DIR="/tmp/config"
YUM_CONF="$YUM_CONF_DIR/yum.conf"
YUM_REPOS_DIR="$YUM_CONF_DIR/yum.repos.d"
GPG_KEYS_DIR="$YUM_CONF_DIR/rpm-gpg-keys"
DOWNLOAD_PATH_ROOT=/export/mirror/centos
STX_TOOLS_BRANCH="master"
STX_TOOLS_BRANCH_ROOT_DIR="$HOME/stx-tools"
STX_TOOLS_OS_SUBDIR="centos-mirror-tools"
DAILY_REPO_DIR_SYNC_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
if [ -f "$DAILY_REPO_DIR_SYNC_DIR/stx_tool_utils.sh" ]; then
source "$DAILY_REPO_DIR_SYNC_DIR/stx_tool_utils.sh"
elif [ -f "$DAILY_REPO_DIR_SYNC_DIR/../stx_tool_utils.sh" ]; then
source "$DAILY_REPO_DIR_SYNC_DIR/../stx_tool_utils.sh"
else
>&2 echo "Error: Can't find 'stx_tool_utils.sh'"
exit 1
fi
usage () {
echo "$0 [-b <branch>] [-d <dir>]"
echo ""
echo "Options:"
echo " -b: Use an alternate branch of stx-tools. Default is 'master'."
echo " -d: Directory where we will clone stx-tools. Default is \$HOME."
echo ""
}
while getopts "b:d:h" opt; do
case "${opt}" in
b)
# branch
STX_TOOLS_BRANCH="${OPTARG}"
if [ $"STX_TOOLS_BRANCH" == "" ]; then
usage
exit 1
fi
;;
d)
# download directory for stx-tools
STX_TOOLS_BRANCH_ROOT_DIR="${OPTARG}"
if [ "$STX_TOOLS_BRANCH_ROOT_DIR" == "" ]; then
usage
exit 1
fi
;;
h)
# Help
usage
exit 0
;;
*)
usage
exit 1
;;
esac
done
STX_TOOLS_DL_ROOT_DIR="$STX_TOOLS_BRANCH_ROOT_DIR/$STX_TOOLS_BRANCH"
STX_TOOLS_DL_DIR="$STX_TOOLS_DL_ROOT_DIR/stx-tools"
UPSTREAM_YUM_REPOS_DIR="$STX_TOOLS_DL_DIR/$STX_TOOLS_OS_SUBDIR/yum.repos.d"
UPSTREAM_YUM_CONF="$STX_TOOLS_DL_DIR/$STX_TOOLS_OS_SUBDIR/yum.conf.sample"
UPSTREAM_GPG_KEYS_DIR="$STX_TOOLS_DL_DIR/$STX_TOOLS_OS_SUBDIR/rpm-gpg-keys"
update_gpg_keys () {
local UPSTREAM_KEY=""
local KEY=""
local UPSTREAM_CHECKSUM=""
local CHECKSUM=""
for UPSTREAM_KEY in $(find $UPSTREAM_GPG_KEYS_DIR -type f | sort ); do
KEY=$GPG_KEYS_DIR/$(basename $UPSTREAM_KEY)
if [ ! -f "$KEY" ]; then
echo "Copy new key file '$UPSTREAM_KEY' to '$KEY'"
\cp "$UPSTREAM_KEY" "$KEY"
continue
fi
UPSTREAM_CHECKSUM=$(md5sum $UPSTREAM_KEY | cut -d ' ' -f 1)
CHECKSUM=$(md5sum $KEY | cut -d ' ' -f 1)
if [ "$UPSTREAM_CHECKSUM" == "$CHECKSUM" ]; then
echo "Already have '$UPSTREAM_KEY'"
continue
fi
# Key mismatch. What to do?
>&2 echo "Error: Key mismatch: '$UPSTREAM_KEY' vs '$KEY'"
ERR_COUNT=$((ERR_COUNT + 1))
done
return 0
}
get_repo_url () {
local YUM_CONF="$1"
local REPO_ID="$2"
local URL=""
URL=$(cd $(dirname $YUM_CONF);
yum repoinfo --config="$(basename $YUM_CONF)" --disablerepo="*" --enablerepo="$REPO_ID" | \
grep Repo-baseurl | \
cut -d ' ' -f 3;
exit ${PIPESTATUS[0]}
)
if [ $? != 0 ]; then
>&2 echo "ERROR: yum repoinfo --config='$YUM_CONF' --disablerepo='*' --enablerepo='$REPO_ID'"
return 1
fi
echo "$URL"
return 0
}
get_repo_name () {
local YUM_CONF="$1"
local REPO_ID="$2"
local NAME=""
NAME=$(cd $(dirname $YUM_CONF);
yum repoinfo --config="$(basename $YUM_CONF)" --disablerepo="*" --enablerepo="$REPO_ID" | \
grep Repo-name | \
cut -d ' ' -f 3;
exit ${PIPESTATUS[0]}
)
if [ $? != 0 ]; then
>&2 echo "ERROR: yum repoinfo --config='$YUM_CONF' --disablerepo='*' --enablerepo='$REPO_ID'"
return 1
fi
echo "$NAME"
return 0
}
archive_repo_id () {
local REPO_ID="$1"
local YUM_CONF="$2"
local REPO="$3"
local REPO_NAME=""
local TEMP=""
local EXTRA=""
if [ ! -f "$YUM_CONF" ]; then
>&2 echo "ERROR: invalid file YUM_CONF='$YUM_CONF'"
return 1
fi
if [ ! -f "$REPO" ]; then
>&2 echo "ERROR: invalid file REPO='$REPO'"
return 1
fi
REPO_NAME=$(get_repo_name "$YUM_CONF" "$REPO_ID")
if [ $? != 0 ]; then
return 1
fi
TEMP=$(mktemp '/tmp/repo_update_XXXXXX')
if [ "$TEMP" == "" ]; then
>&2 echo "ERROR: mktemp '/tmp/repo_update_XXXXXX'"
return 1
fi
EXTRA=$(echo $TEMP | sed 's#/tmp/repo_update_##')
\rm $TEMP
echo "Archive: '$REPO_ID' as '$REPO_ID-$EXTRA' in file '$REPO'"
sed -i "s#^[[]$REPO_ID[]]#[$REPO_ID-$EXTRA]#" "$REPO"
sed -i "s#^name=$REPO_NAME\$#name=$REPO_NAME-$EXTRA#" "$REPO"
return 0
}
copy_repo_id () {
local REPO_ID="$1"
local FORM_REPO="$2"
local TO_REPO="$3"
local TEMPDIR=""
local FRAGMENT=""
echo "Copy new repo id: '$REPO_ID' from '$FORM_REPO' into file '$TO_REPO'"
if [ ! -f "$FORM_REPO" ]; then
>&2 echo "ERROR: invalid file FORM_REPO='$FORM_REPO'"
return 1
fi
if [ ! -f "$TO_REPO" ]; then
>&2 echo "ERROR: invalid file TO_REPO='$TO_REPO'"
return 1
fi
TEMPDIR=$(mktemp -d '/tmp/repo_update_XXXXXX')
if [ "$TEMPDIR" == "" ]; then
>&2 echo "ERROR: mktemp -d '/tmp/repo_update_XXXXXX'"
return 1
fi
csplit --prefix=$TEMPDIR/xx --quiet "$FORM_REPO" '/^[[]/' '{*}' >> /dev/null
if [ $? -ne 0 ]; then
>&2 echo "ERROR: csplit --prefix=$TEMPDIR/xx '$FORM_REPO' '/^[[]/' '{*}'"
return 1
fi
FRAGMENT=$(grep -l "$REPO_ID" $TEMPDIR/* | head -n 1)
if [ "$TEMPDIR" == "" ]; then
>&2 echo "ERROR: grep -l '$REPO_ID' $TEMPDIR/* | head -n 1"
return 1
fi
echo >> $TO_REPO
cat $FRAGMENT | sed "s#/etc/pki/rpm-gpg#$GPG_KEYS_DIR#" >> $TO_REPO
\rm -rf $TEMPDIR
return 0
}
update_yum_repos_d () {
local UPSTREAM_REPO=""
local REPO=""
local UPSTREAM_REPO_ID=""
local REPO_ID=""
local UPSTREAM_REPO_URL=""
local REPO_URL=""
local UPSTREAM_REPO_NAME=""
local REPO_NAME=""
local UPSTREAM_DOWNLOAD_PATH=""
local DOWNLOAD_PATH=""
local TEMPDIR=""
for UPSTREAM_REPO in $(find $UPSTREAM_YUM_REPOS_DIR -name '*.repo' | sort ); do
REPO=$YUM_REPOS_DIR/$(basename $UPSTREAM_REPO)
if [ ! -f $REPO ]; then
# New repo file
echo "Copy new repo file '$UPSTREAM_REPO' to '$REPO'"
cat "$UPSTREAM_REPO" | sed "s#/etc/pki/rpm-gpg#$GPG_KEYS_DIR#" > "$REPO"
continue
fi
for UPSTREAM_REPO_ID in $(grep '^[[]' $UPSTREAM_REPO | sed 's#[][]##g'); do
UPSTREAM_REPO_URL=$(get_repo_url "$UPSTREAM_YUM_CONF" "$UPSTREAM_REPO_ID")
if [ $? != 0 ]; then
return 1
fi
UPSTREAM_REPO_NAME=$(get_repo_name "$UPSTREAM_YUM_CONF" "$UPSTREAM_REPO_ID")
if [ $? != 0 ]; then
return 1
fi
UPSTREAM_DOWNLOAD_PATH="$DOWNLOAD_PATH_ROOT/$(repo_url_to_sub_path "$UPSTREAM_REPO_URL")"
# echo "Processing: REPO=$UPSTREAM_REPO REPO_ID=$UPSTREAM_REPO_ID REPO_URL=$REPO_URL DOWNLOAD_PATH=$DOWNLOAD_PATH"
REPO_ID=$(grep "^[[]$UPSTREAM_REPO_ID[]]" $REPO | sed 's#[][]##g')
if [ "$REPO_ID" == "" ]; then
copy_repo_id "$UPSTREAM_REPO_ID" "$UPSTREAM_REPO" "$REPO"
if [ $? != 0 ]; then
>&2 echo "Error: copy_repo_id '$UPSTREAM_REPO_ID' '$UPSTREAM_REPO' '$REPO'"
return 1
fi
continue
fi
if [ "$REPO_ID" != "$UPSTREAM_REPO_ID" ]; then
>&2 echo "Error: bad grep? '$REPO_ID' != '$UPSTREAM_REPO_ID'"
return 1
fi
# REPO_URL=$(cd $(dirname $YUM_CONF);
# yum repoinfo --config="$(basename $YUM_CONF)" --disablerepo="*" --enablerepo="$REPO_ID" | \
# grep Repo-baseurl | \
# cut -d ' ' -f 3;
# exit ${PIPESTATUS[0]})
REPO_URL=$(get_repo_url "$YUM_CONF" "$REPO_ID")
if [ $? != 0 ]; then
# >&2 echo "ERROR: yum repoinfo --config='$YUM_CONF' --disablerepo='*' --enablerepo='$REPO_ID'"
return 1
fi
REPO_NAME=$(get_repo_name "$YUM_CONF" "$REPO_ID")
if [ $? != 0 ]; then
# >&2 echo "ERROR: yum repoinfo --config='$YUM_CONF' --disablerepo='*' --enablerepo='$REPO_ID'"
return 1
fi
REPO_URL=$(yum repoinfo --config="$YUM_CONF" --disablerepo="*" --enablerepo="$REPO_ID" | grep Repo-baseurl | cut -d ' ' -f 3)
DOWNLOAD_PATH="$DOWNLOAD_PATH_ROOT/$(repo_url_to_sub_path "$REPO_URL")"
# Check critical content is the same
if [ "$UPSTREAM_REPO_URL" == "$REPO_URL" ] && [ "$UPSTREAM_DOWNLOAD_PATH" == "$DOWNLOAD_PATH" ] && [ "$UPSTREAM_REPO_NAME" == "$REPO_NAME" ]; then
echo "Already have '$UPSTREAM_REPO_ID' from '$UPSTREAM_REPO'"
continue
fi
# Something has changed, log it
if [ "$UPSTREAM_REPO_URL" != "$REPO_URL" ]; then
>&2 echo "Warning: Existing repo has changed: file:$UPSTREAM_REPO, id:$UPSTREAM_REPO_ID, url:$REPO_URL -> $UPSTREAM_REPO_URL"
elif [ "$UPSTREAM_REPO_NAME" != "$REPO_NAME" ]; then
>&2 echo "Warning: Existing repo has changed: file:$UPSTREAM_REPO, id:$UPSTREAM_REPO_ID, name:$REPO_URL -> $UPSTREAM_REPO_URL"
elif [ "$UPSTREAM_DOWNLOAD_PATH" != "$DOWNLOAD_PATH" ]; then
>&2 echo "Warning: Existing download path has changed: file:$UPSTREAM_REPO, id:$UPSTREAM_REPO_ID, path:$UPSTREAM_DOWNLOAD_PATH -> $DOWNLOAD_PATH"
fi
archive_repo_id "$REPO_ID" "$YUM_CONF" "$REPO"
copy_repo_id "$UPSTREAM_REPO_ID" "$UPSTREAM_REPO" "$REPO"
if [ $? != 0 ]; then
>&2 echo "Error: copy_repo_id '$UPSTREAM_REPO_ID' '$UPSTREAM_REPO' '$REPO'"
return 1
fi
# # Create new repo id? Edit old one? Unclear what to do.
# ERR_COUNT=$((ERR_COUNT + 1))
done
done
return 0
}
if [ -f $LOGFILE ]; then
\rm -f $LOGFILE
fi
(
ERR_COUNT=0
mkdir -p "$YUM_CONF_DIR"
if [ $? -ne 0 ]; then
>&2 echo "Error: mkdir -p '$YUM_CONF_DIR'"
exit 1
fi
mkdir -p "$YUM_REPOS_DIR"
if [ $? -ne 0 ]; then
>&2 echo "Error: mkdir -p '$YUM_CONF_DIR'"
exit 1
fi
mkdir -p "$GPG_KEYS_DIR"
if [ $? -ne 0 ]; then
>&2 echo "Error: mkdir -p '$YUM_CONF_DIR'"
exit 1
fi
stx_tool_clone_or_update "$STX_TOOLS_BRANCH" "$STX_TOOLS_DL_ROOT_DIR"
if [ $? -ne 0 ]; then
>&2 echo "Error: Failed to update stx_tools. Can't continue."
exit 1
fi
if [ ! -f "$YUM_CONF" ]; then
echo "Copy yum.conf: '$UPSTREAM_YUM_CONF' -> '$YUM_CONF'"
cat $UPSTREAM_YUM_CONF | sed "s#=/tmp/#=$YUM_CONF_DIR/#" | \
sed "s#reposdir=yum.repos.d#reposdir=$YUM_CONF_DIR/yum.repos.d#" | \
sed 's#/etc/pki/rpm-gpg/#$GPG_KEYS_DIR/#' >> $YUM_CONF
fi
update_gpg_keys
if [ $? -ne 0 ]; then
>&2 echo "Error: Failed in update_gpg_keys Can't continue."
exit 1
fi
update_yum_repos_d
if [ $? -ne 0 ]; then
>&2 echo "Error: Failed in update_yum_repos_d. Can't continue."
exit 1
fi
if [ $ERR_COUNT -ne 0 ]; then
>&2 echo "Error: Failed to update $ERR_COUNT repo_id's"
exit 1
fi
exit 0
) | tee $LOGFILE
exit ${PIPESTATUS[0]}

55
centos-mirror-tools/stx_mirror_scripts/stx_tool_utils.sh
View File

@ -1,55 +0,0 @@
#
# SPDX-License-Identifier: Apache-2.0
#
# Utility functions to download stx-tools git
#
# This script was originated by Scott Little.
#
STX_TOOL_UTILS_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
if [ -f "$STX_TOOL_UTILS_DIR/dl_utils.sh" ]; then
source "$STX_TOOL_UTILS_DIR/dl_utils.sh"
elif [ -f "$STX_TOOL_UTILS_DIR/../dl_utils.sh" ]; then
source "$STX_TOOL_UTILS_DIR/../dl_utils.sh"
else
echo "Error: Can't find 'dl_utils.sh'"
exit 1
fi
STX_TOOLS_DEFAULT_BRANCH="master"
STX_TOOLS_DEFAULT_ROOT_DIR="$HOME/stx-tools"
STX_TOOLS_GIT_URL="https://git.starlingx.io/stx-tools.git"
#
# stx_tool_clone_or_update [<branch>] [<dir>]
#
# Clone stx-tools under the supplied directory,
# and checkout the desired branch.
#
stx_tool_clone_or_update () {
local BRANCH="$1"
local DL_ROOT_DIR="$2"
local CMD
if [ "$BRANCH" == "" ]; then
BRANCH="$STX_TOOLS_DEFAULT_BRANCH"
fi
if [ "$DL_ROOT_DIR" == "" ]; then
DL_ROOT_DIR="$STX_TOOLS_DEFAULT_ROOT_DIR/$BRANCH"
fi
local DL_DIR="$DL_ROOT_DIR/stx-tools"
dl_git_from_url "$STX_TOOLS_GIT_URL" "$BRANCH" "$DL_DIR"
if [ $? -ne 0 ]; then
echo "Error: Failed to download '$STX_TOOLS_GIT_URL'"
return 1;
fi
return 0
}

267
centos-mirror-tools/url_utils.sh
View File

@ -1,267 +0,0 @@
#
# SPDX-License-Identifier: Apache-2.0
#
# A set of bash utility functions to parse a URL.
# This script was originated by Scott Little
#
url_protocol () {
local URL="$1"
if [ "$URL" == "" ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): empty argument"
return 1
fi
if echo "$URL" | grep -q '[:][/][/]' ;then
echo "$URL" | sed 's#^\(.*\)://.*$#\1#'
else
echo "http"
fi
return 0
}
url_login () {
local URL="$1"
if [ "$URL" == "" ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): empty argument"
return 1
fi
echo "$URL" | sed 's#^.*://\([^/]*\)/.*$#\1#'
return 0
}
url_user () {
local URL="$1"
local LOGIN
if [ "$URL" == "" ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): empty argument"
return 1
fi
url_login "$URL" | sed -e '/@/! s#.*## ; s#\([^@]*\)@.*#\1#'
if [ ${PIPESTATUS[0]} -ne 0 ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): url_login failed"
return 1
fi
return 0
}
url_port () {
local URL="$1"
local LOGIN
if [ "$URL" == "" ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): empty argument"
return 1
fi
url_login "$URL" | sed -e '/:/! s#.*## ; s#[^:]*:\([^:]*\)#\1#'
if [ ${PIPESTATUS[0]} -ne 0 ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): url_login failed"
return 1
fi
return 0
}
url_server () {
local URL="$1"
local LOGIN
if [ "$URL" == "" ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): empty argument"
return 1
fi
url_login "$URL" | sed 's#^.*@## ; s#:.*$##'
if [ ${PIPESTATUS[0]} -ne 0 ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): url_login failed"
return 1
fi
return 0
}
url_path () {
local URL="$1"
if [ "$URL" == "" ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): empty argument"
return 1
fi
echo "$URL" | sed 's#^.*://[^/]*/\(.*\)$#\1#'
return 0
}
#
# url_path_to_fs_path:
#
# Convert url format path to file system format.
# e.g. replace %20 with ' '.
#
# Note: Does NOT test the output path to ensure there are
# no illegal file system characters.
#
url_path_to_fs_path () {
local INPUT_PATH="$1"
local TEMP
if [ "$INPUT_PATH" == "" ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): empty argument"
return 1
fi
# Deviate from URI spec by not substituding '+' with ' '.
# It would alias '%20' and we need unique mappings.
# TEMP="${INPUT_PATH//+/ }"
TEMP="$INPUT_PATH"
printf '%b' "${TEMP//%/\\x}"
return 0
}
#
# fs_path_to_url_path:
#
# Convert file system format path to url format.
# e.g. replace ' ' with %20.
#
fs_path_to_url_path () {
local INPUT_PATH="$1"
local LENGTH
local POS
local CHAR
if [ "$INPUT_PATH" == "" ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): empty argument"
return 1
fi
LENGTH="${#INPUT_PATH}"
for (( POS = 0; POS < LENGTH; POS++ )); do
CHAR="${1:POS:1}"
case $CHAR in
[/a-zA-Z0-9.~_-])
# Reference https://metacpan.org/pod/URI::Escape
printf "$CHAR"
;;
*)
printf '%%%02X' "'$CHAR"
;;
esac
done
return 0
}
#
# normalize_path:
#
# 1) replace // with /
# 2) replace /./ with /
# 3) Remove trailing /
# 4) Remove leading ./
#
normalize_path () {
local INPUT_PATH="$1"
if [ "$INPUT_PATH" == "" ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): empty argument"
return 1
fi
echo "$INPUT_PATH" | sed 's#[/]\+#/#g ; s#[/][.][/]#/#g ; s#/$## ; s#^[.]/##'
return 0
}
#
# repo_url_to_sub_path:
#
repo_url_to_sub_path () {
local URL="$1"
local FAMILY=""
local SERVER=""
local URL_PATH=""
local FS_PATH=""
if [ "$URL" == "" ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): empty argument"
return 1
fi
# set FAMILY from URL
echo $URL | grep -q 'centos[.]org' && FAMILY=centos
echo $URL | grep -q 'fedoraproject[.]org[/]pub[/]epel' && FAMILY=epel
SERVER=$(url_server "$URL")
if [ $? -ne 0 ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): url_server '$URL'"
return 1
fi
URL_PATH="$(url_path "$URL")"
if [ $? -ne 0 ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): url_path '$URL'"
return 1
fi
FS_PATH="$(url_path_to_fs_path "$URL_PATH")"
if [ $? -ne 0 ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): url_path_to_fs_path '$URL_PATH'"
return 1
fi
FS_PATH="$(normalize_path "$FS_PATH")"
if [ $? -ne 0 ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): normalize_path '$FS_PATH'"
return 1
fi
normalize_path "./$FAMILY/$SERVER/$FS_PATH"
if [ $? -ne 0 ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): normalize_path './$FAMILY/$SERVER/$FS_PATH'"
return 1
fi
return 0
}
STX_MIRROR_PROTOCOL="https"
STX_MIRROR_HOST="mirror.starlingx.windriver.com"
STX_MIRROR_PORT="443"
STX_MIRROR_URL_ROOT="mirror"
url_to_stx_mirror_url () {
local URL="$1"
local DISTRO="$2"
local URL_PATH=""
local FS_PATH=""
if [ "$URL" == "" ] || [ "$DISTRO" == "" ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): empty argument"
return 1
fi
FS_PATH="$(repo_url_to_sub_path "$URL")"
if [ $? -ne 0 ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): repo_url_to_sub_path '$URL'"
return 1
fi
URL_PATH=$(fs_path_to_url_path "$FS_PATH")
if [ $? -ne 0 ]; then
>&2 echo "Error: $FUNCNAME (${LINENO}): fs_path_to_url_path '$FS_PATH'"
return 1
fi
echo "$STX_MIRROR_PROTOCOL://$STX_MIRROR_HOST:$STX_MIRROR_PORT/$STX_MIRROR_URL_ROOT/$DISTRO/$URL_PATH"
return 0
}

288
centos-mirror-tools/utils.sh
View File

@ -1,288 +0,0 @@
#
# SPDX-License-Identifier: Apache-2.0
#
# Copyright (C) 2019 Intel Corporation
#
UTILS_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
: ${_CURL_OPTS="--fail --location --connect-timeout 15 --speed-time 15 --speed-limit 1 --retry 5"}
source $UTILS_DIR/url_utils.sh || exit 1
get_yum_command() {
local _file=$1
local _level=$2
local rpm_name=""
local arr=( $(split_filename $_file) )
local arch=${arr[3]}
local yumdownloader_extra_opts=""
rpm_name="$(get_rpm_level_name $_file $_level)"
if [ "$arch" == "src" ]; then
yumdownloader_extra_opts="--source"
else
yumdownloader_extra_opts="--exclude='*.i686' --archlist=noarch,x86_64"
fi
echo "${SUDO} yumdownloader -q -C ${YUMCONFOPT} ${RELEASEVER} $yumdownloader_extra_opts $rpm_name"
}
# Usage: get_download_file_command [--quiet] [--timestamps] URL [OUTPUT_FILE]
get_download_file_command() {
local _opts="$_CURL_OPTS"
while true ; do
case "$1" in
--quiet) _opts+=" --silent --show-error" ;;
--timestamps) _opts+=" --remote-time" ;;
-*)
echo >&2 "Unknown option $1"
return 1
;;
*)
break
esac
shift
done
local _name="$1"
local _ret=""
if [[ $# -gt 1 ]]; then
_opts+=" -o $2"
else
_opts+=" -O"
fi
if [[ "$_name" == http?(s)://* ]]; then
_ret="curl $_opts $_name"
else
_ret="curl $_opts $(koji_url $_name)"
fi
echo "$_ret"
}
# Usage: download_file [--quiet] [--timestamps] URL [OUTPUT_FILE]
download_file() {
local _opts="$_CURL_OPTS"
while true ; do
case "$1" in
--quiet) _opts+=" --silent --show-error" ;;
--timestamps) _opts+=" --remote-time" ;;
-*)
echo >&2 "Unknown option $1"
return 1
;;
*)
break
esac
shift
done
if [[ "$#" -gt 1 ]] ; then
local _dest_file="$2"
else
local _dest_file="$(basename "$1")"
fi
if curl $_opts -o "${_dest_file}.dl_part" "$1" ; then
\mv -fT "${_dest_file}.dl_part" "${_dest_file}"
return 0
fi
\rm -f "${_dest_file}.dl_part"
return 1
}
# Usage: url_exists [--quiet] URL
url_exists() {
local _opts
if [[ "$1" == "--quiet" ]] ; then
_opts+=" --quiet"
shift
fi
wget $_opts --spider "$1"
}
get_rpm_level_name() {
local _rpm_name=$1
local _level=$2
if [ $_level == "L1" ]; then
SFILE=`echo $_rpm_name | rev | cut -d'.' -f3- | rev`
elif [ $_level == "$dl_from_stx_mirror" ];then
# stx mirror uses L1 matches
SFILE=`echo $_rpm_name | rev | cut -d'.' -f3- | rev`
elif [ $_level == "L2" ];then
SFILE=`echo $_rpm_name | rev | cut -d'-' -f2- | rev`
else
SFILE=`echo $_rpm_name | rev | cut -d'-' -f3- | rev`
fi
echo "$SFILE"
}
get_url() {
local _name="$1"
local _level="$2"
local _ret=""
if [ "$_level" == "K1" ]; then
_ret="$(koji_url $_name)"
elif [[ "$_name" == *"#"* ]]; then
_ret="$(echo $_name | cut -d'#' -f2-2)"
if [ $_level == "stx_mirror" ]; then
_ret="$(url_to_stx_mirror_url $_ret $distro)"
fi
else
_url_cmd="$(get_yum_command $_name $_level) --url"
# When we add --url to the yum download command,
# --archlist is no longer enforced. Multiple
# url's might be returned. So use grep to
# filter urls for the desitered arch.
local arr=( $(split_filename $_name) )
local arch=${arr[3]}
_ret="$(${SUDO} $_url_cmd | grep "[.]$arch[.]rpm$" | head -n 1)"
fi
echo "$_ret"
}
# Function to split an rpm filename into parts.
#
# Returns a space seperated list containing:
# <NAME> <VERSION> <RELEASE> <ARCH> <EPOCH>
#
split_filename () {
local rpm_filename=$1
local RPM=""
local SFILE=""
local ARCH=""
local RELEASE=""
local VERSION=""
local NAME=""
local EPOCH=""
RPM=$(echo $rpm_filename | rev | cut -d'.' -f-1 | rev)
SFILE=$(echo $rpm_filename | rev | cut -d'.' -f2- | rev)
ARCH=$(echo $SFILE | rev | cut -d'.' -f-1 | rev)
SFILE=$(echo $SFILE | rev | cut -d'.' -f2- | rev)
RELEASE=$(echo $SFILE | rev | cut -d'-' -f-1 | rev)
SFILE=$(echo $SFILE | rev | cut -d'-' -f2- | rev)
VERSION=$(echo $SFILE | rev | cut -d'-' -f-1 | rev)
NAME=$(echo $SFILE | rev | cut -d'-' -f2- | rev)
if [[ $NAME = *":"* ]]; then
EPOCH=$(echo $NAME | cut -d':' -f-1)
NAME=$(echo $NAME | cut -d':' -f2-)
fi
echo "$NAME" "$VERSION" "$RELEASE" "$ARCH" "$EPOCH"
}
# Function to predict the URL where a rpm might be found.
# Assumes the rpm was compile for EPEL by fedora's koji.
koji_url () {
local rpm_filename=$1
local arr=( $(split_filename $rpm_filename) )
local n=${arr[0]}
local v=${arr[1]}
local r=${arr[2]}
local a=${arr[3]}
echo "https://kojipkgs.fedoraproject.org/packages/$n/$v/$r/$a/$n-$v-$r.$a.rpm"
}
get_dest_directory() {
local _type=$1
local _dest=""
if [ "$_type" == "src" ]; then
_dest="$MDIR_SRC"
else
_dest="$MDIR_BIN/$_type"
fi
echo "$_dest"
}
process_result() {
local _type="$1"
local dest_dir="$2"
local url="$3"
local sfile="$4"
if [ "$_type" != "src" ] && [ ! -d $dest_dir ]; then
mkdir -p $dest_dir
fi
echo "url_srpm:$url"
if ! mv -f $sfile* $dest_dir ; then
echo "FAILED to move $rpm_name"
echo "fail_move_srpm:$rpm_name" >> $LOG
return 1
fi
echo "found_srpm:$rpm_name"
echo $rpm_name >> $FOUND_SRPMS
return 0
}
get_download_cmd() {
local ff="$1"
local _level="$2"
# Decide if the list will be downloaded using yumdownloader or curl
if [[ $ff != *"#"* ]]; then
rpm_name=$ff
if [ $_level == "K1" ]; then
download_cmd="$(get_download_file_command --quiet $rpm_name)"
else
# yumdownloader with the appropriate flag for src, noarch or x86_64
# download_cmd="${SUDOCMD} $(get_yum_command $rpm_name $_level)"
download_cmd="$(get_yum_command $rpm_name $_level)"
fi
else
# Build the download command
rpm_url=$(get_url "$ff" "$_level")
download_cmd="$(get_download_file_command --quiet $rpm_url)"
fi
echo "$download_cmd"
}
get_rpm_name() {
local ret=""
if [[ "$1" != *"#"* ]]; then
ret="$1"
else
ret="$(echo $1 | cut -d"#" -f1-1)"
fi
echo "$ret"
}
get_arch_from_rpm() {
local _file=$1
local _split=()
local _arch=""
if [[ "$1" == *"#"* ]]; then
_file=$(echo $_file | cut -d"#" -f1-1)
fi
_split=( $(split_filename $_file) )
_arch=${_split[3]}
echo "$_arch"
}
get_from() {
list=$1
base=$(basename $list .lst) # removing lst extension
base=$(basename $base .log) # removing log extension
from=$(echo $base | rev | cut -d'_' -f1-1 | rev)
echo $from
}
check_sha256sum() {
local file="${1}"
local sha256sum="${2}"
sha256sum "${file}" | cut -d' ' -f1 | grep -q -F -x "${sha256sum}"
}

92
centos-mirror-tools/utils_tests.sh
View File

@ -1,92 +0,0 @@
#!/bin/bash
#
# SPDX-License-Identifier: Apache-2.0
#
# Copyright (C) 2019 Intel Corporation
#
# Set of unit tests for dl_rpms.sh
set -o errexit
set -o nounset
YUMCONFOPT=""
RELEASEVER="--releasever=7"
source utils.sh
check_result() {
local _res="$1"
local _expect="$2"
if [[ "$_res" != $_expect ]]; then
echo "Fail"
echo "expected $_expect"
echo "returned $_res"
exit 1
fi
echo "Success"
}
# get_download_file_command
res=$(get_download_file_command "https://libvirt.org/sources/python/libvirt-python-3.5.0-1.fc24.src.rpm")
expect="curl* https://libvirt.org/sources/python/libvirt-python-3.5.0-1.fc24.src.rpm"
check_result "$res" "$expect"
res=$(get_download_file_command --quiet "python2-httpbin-0.5.0-6.el7.noarch.rpm")
expect="curl*--silent* https://kojipkgs.fedoraproject.org/packages/python2-httpbin/0.5.0/6.el7/noarch/python2-httpbin-0.5.0-6.el7.noarch.rpm"
check_result "$res" "$expect"
# get_url
res=$(get_url "acpid-2.0.19-9.el7.x86_64.rpm" "L1")
expect="https://vault.centos.org/centos/7.4.1708/cr/x86_64/Packages/acpid-2.0.19-9.el7.x86_64.rpm"
check_result "$res" "$expect"
res=$(get_url "python2-httpbin-0.5.0-6.el7.noarch.rpm#http://cbs.centos.org/kojifiles/packages/python-httpbin/0.5.0/6.el7/noarch/python2-httpbin-0.5.0-6.el7.noarch.rpm" "L1")
expect="http://cbs.centos.org/kojifiles/packages/python-httpbin/0.5.0/6.el7/noarch/python2-httpbin-0.5.0-6.el7.noarch.rpm"
check_result "$res" "$expect"
res=$(get_url "python2-httpbin-0.5.0-6.el7.noarch.rpm" "K1")
expect="https://kojipkgs.fedoraproject.org/packages/python2-httpbin/0.5.0/6.el7/noarch/python2-httpbin-0.5.0-6.el7.noarch.rpm"
check_result "$res" "$expect"
# get_yum_command
res=$(get_yum_command "anaconda-21.48.22.147-1.el7.centos.src.rpm" "L1")
expect="yumdownloader -q -C --releasever=7 --source anaconda-21.48.22.147-1.el7.centos"
check_result "$res" "$expect"
res=$(get_yum_command "acpid-2.0.19-9.el7.x86_64.rpm" "L1")
expect="yumdownloader -q -C --releasever=7 --archlist=noarch,x86_64 acpid-2.0.19-9.el7"
check_result "$res" "$expect"
# get_rpm_level_name
res=$(get_rpm_level_name "acl-2.2.51-12.el7.x86_64.rpm" "L1")
expect="acl-2.2.51-12.el7"
check_result "$res" "$expect"
res=$(get_rpm_level_name "acl-2.2.51-12.el7.x86_64.rpm" "L3")
expect="acl"
check_result "$res" "$expect"
res=$(get_rpm_level_name "anaconda-21.48.22.147-1.el7.centos.src.rpm" "L2")
expect="anaconda-21.48.22.147"
check_result "$res" "$expect"
res=$(get_arch_from_rpm "acl-2.2.51-12.el7.x86_64.rpm")
expect="x86_64"
check_result "$res" "$expect"
res=$(get_arch_from_rpm "acl-2.2.51-12.el7.noarch.rpm")
expect="noarch"
check_result "$res" "$expect"
res=$(get_arch_from_rpm "acl-2.2.51-12.el7.src.rpm")
expect="src"
check_result "$res" "$expect"
res=$(get_arch_from_rpm "acl-2.2.51-12.el7.src.rpm#https://someurl.com/acl-2.2.51-12.el7.src.rpm")
expect="src"
check_result "$res" "$expect"

43
centos-mirror-tools/yum.conf.sample
View File

@ -1,43 +0,0 @@
[main]
releasever=7
cachedir=/tmp/cache/yum/$basearch/$releasever
keepcache=0
debuglevel=2
logfile=/tmp/log/yum.log
exactarch=1
obsoletes=1
gpgcheck=1
plugins=1
installonly_limit=5
bugtracker_url=http://bugs.centos.org/set_project.php?project_id=23&ref=http://bugs.centos.org/bug_report_page.php?category=yum
distroverpkg=centos-release
override_install_langs=en_US.utf8
tsflags=nodocs
http_caching=packages
reposdir=yum.repos.d
# This is the default, if you make this bigger yum won't see if the metadata
# is newer on the remote and so you'll "gain" the bandwidth of not having to
# download the new metadata and "pay" for it by yum not having correct
# information.
# It is esp. important, to have correct metadata, for distributions like
# Fedora which don't keep old packages around. If you don't like this checking
# interrupting your command line usage, it's much better to have something
# manually check the metadata once an hour (yum-updatesd will do this).
# metadata_expire=90m
# PUT YOUR REPOS HERE OR IN separate files named file.repo
# in /etc/yum.repos.d
#####
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#

86
centos-mirror-tools/yum.repos.d/StarlingX-Centos-7.2.repo
View File

@ -1,86 +0,0 @@
#####
# Centos 7.2.1511
#
[Starlingx-C7.2.1511-cloud-newton]
name=Starlingx-CentOS-7.2.1511 - Cloud-newton
baseurl=https://vault.centos.org/7.2.1511/cloud/x86_64/openstack-newton/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.2.1511-cloud-newton-source]
name=Starlingx-CentOS-7.2.1511 - Cloud-newton-source
baseurl=https://vault.centos.org/7.2.1511/cloud/Source/openstack-newton/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.2.1511-extras]
name=StarlingX-CentOS-7.2.1511 - extras
baseurl=https://vault.centos.org/7.2.1511/extras/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.2.1511-extras-source]
name=Starlingx-CentOS-7.2.1511 - extras-source
baseurl=https://vault.centos.org/7.2.1511/extras/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.2.1511-os]
name=Starlingx-CentOS-7.2.1511 - os
baseurl=https://vault.centos.org/7.2.1511/os/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.2.1511-os-source]
name=Starlingx-CentOS-7.2.1511 - os-source
baseurl=https://vault.centos.org/7.2.1511/os/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.2.1511-updates]
name=Starlingx-CentOS-7.2.1511 - updates
baseurl=https://vault.centos.org/7.2.1511/updates/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.2.1511-updates-source]
name=Starlingx-CentOS-7.2.1511 - updates-source
baseurl=https://vault.centos.org/7.2.1511/updates/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.2.1511-virt-kvm]
name=Starlingx-CentOS-7.2.1511 - virt-kvm
baseurl=https://vault.centos.org/7.2.1511/virt/x86_64/kvm-common
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.2.1511-virt-kvm-source]
name=Starlingx-CentOS-7.2.1511 - virt-kvm-source
baseurl=https://vault.centos.org/7.2.1511/virt/Source/kvm-common
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.2.1511-cr]
name=Starlingx-CentOS-7.2.1511 - cr
baseurl=https://vault.centos.org/centos/7.2.1511/cr/x86_64
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.2.1511-cr-source]
name=Starlingx-CentOS-7.2.1511 - cr-source
baseurl=https://vault.centos.org/centos/7.2.1511/cr/Source
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1

131
centos-mirror-tools/yum.repos.d/StarlingX-Centos-7.3.repo
View File

@ -1,131 +0,0 @@
####
# Centos 7.3.1611
#
[Starlingx-C7.3.1611-cloud-newton]
name=Starlingx-CentOS-7.3.1611 - Cloud-newton
baseurl=https://vault.centos.org/7.3.1611/cloud/x86_64/openstack-newton/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-cloud-newton-source]
name=Starlingx-CentOS-7.3.1611 - Cloud-newton-source
baseurl=https://vault.centos.org/7.3.1611/cloud/Source/openstack-newton/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-cloud-pike]
name=Starlingx-CentOS-7.3.1611 - Cloud-pike
baseurl=https://vault.centos.org/7.3.1611/cloud/x86_64/openstack-pike/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-cloud-pike-source]
name=Starlingx-CentOS-7.3.1611 - Cloud-pike-source
baseurl=https://vault.centos.org/7.3.1611/cloud/Source/openstack-pike/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-extras]
name=Starlingx-CentOS-7.3.1611 - extras
baseurl=https://vault.centos.org/7.3.1611/extras/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-extras-source]
name=Starlingx-CentOS-7.3.1611 - extras-source
baseurl=https://vault.centos.org/7.3.1611/extras/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-os]
name=Starlingx-CentOS-7.3.1611 - os
baseurl=https://vault.centos.org/7.3.1611/os/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-os-source]
name=Starlingx-CentOS-7.3.1611 - os-source
baseurl=https://vault.centos.org/7.3.1611/os/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-rt]
name=Starlingx-CentOS-7.3.1611 - rt
baseurl=https://vault.centos.org/7.3.1611/rt/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-rt-source]
name=Starlingx-CentOS-7.3.1611 - rt-source
baseurl=https://vault.centos.org/7.3.1611/rt/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-updates]
name=Starlingx-CentOS-7.3.1611 - updates
baseurl=https://vault.centos.org/7.3.1611/updates/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-updates-source]
name=Starlingx-CentOS-7.3.1611 - updates-source
baseurl=https://vault.centos.org/7.3.1611/updates/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-virt-kvm]
name=Starlingx-CentOS-7.3.1611 - virt-kvm
baseurl=https://vault.centos.org/7.3.1611/virt/x86_64/kvm-common
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-virt-kvm-source]
name=Starlingx-CentOS-7.3.1611 - virt-kvm-source
baseurl=https://vault.centos.org/7.3.1611/virt/Source/kvm-common
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-virt-libvirt]
name=Starlingx-CentOS-7.3.1611 - virt-libvirt
baseurl=https://vault.centos.org/7.3.1611/virt/x86_64/libvirt-latest
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-virt-libvirt-source]
name=Starlingx-CentOS-7.3.1611 - virt-libvirt-source
baseurl=https://vault.centos.org/7.3.1611/virt/Source/libvirt-latest
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
# 7.3.1611-cr contains older versions of python and valgrind
[Starlingx-C7.3.1611-cr]
name=Starlingx-CentOS-7.3.1611 - cr
baseurl=https://vault.centos.org/centos/7.3.1611/cr/x86_64
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.3.1611-cr-source]
name=Starlingx-CentOS-7.3.1611 - cr-source
baseurl=https://vault.centos.org/centos/7.3.1611/cr/Source
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1

137
centos-mirror-tools/yum.repos.d/StarlingX-Centos-7.4.repo
View File

@ -1,137 +0,0 @@
####
# Centos 7.4.1708
#
[Starlingx-C7.4.1708-cloud-newton]
name=Starlingx-CentOS-7.4.1708 - Cloud-newton
baseurl=https://vault.centos.org/7.4.1708/cloud/x86_64/openstack-newton/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=0
[Starlingx-C7.4.1708-cloud-newton-source]
name=Starlingx-CentOS-7.4.1708 - Cloud-newton-source
baseurl=https://vault.centos.org/7.4.1708/cloud/Source/openstack-newton/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.4.1708-cloud-pike]
name=Starlingx-CentOS-7.4.1708 - Cloud-pike
baseurl=https://vault.centos.org/7.4.1708/cloud/x86_64/openstack-pike/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=0
[Starlingx-C7.4.1708-cloud-pike-source]
name=Starlingx-CentOS-7.4.1708 - Cloud-pike-source
baseurl=https://vault.centos.org/7.4.1708/cloud/Source/openstack-pike/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.4.1708-cloud-queens-source]
name=Starlingx-CentOS-7.4.1708 - Cloud-queens-source
baseurl=https://vault.centos.org/7.4.1708/cloud/Source/openstack-queens/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.4.1708-extras]
name=Starlingx-CentOS-7.4.1708 - extras
baseurl=https://vault.centos.org/7.4.1708/extras/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=0
[Starlingx-C7.4.1708-extras-source]
name=Starlingx-CentOS-7.4.1708 - extras-source
baseurl=https://vault.centos.org/7.4.1708/extras/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.4.1708-os]
name=Starlingx-CentOS-7.4.1708 - os
baseurl=https://vault.centos.org/7.4.1708/os/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=0
[Starlingx-C7.4.1708-os-source]
name=Starlingx-CentOS-7.4.1708 - os-source
baseurl=https://vault.centos.org/7.4.1708/os/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.4.1708-rt]
name=Starlingx-CentOS-7.4.1708 - rt
baseurl=https://vault.centos.org/7.4.1708/rt/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=0
[Starlingx-C7.4.1708-rt-source]
name=Starlingx-CentOS-7.4.1708 - rt-source
baseurl=https://vault.centos.org/7.4.1708/rt/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.4.1708-updates]
name=Starlingx-CentOS-7.4.1708 - updates
baseurl=https://vault.centos.org/7.4.1708/updates/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=0
[Starlingx-C7.4.1708-updates-source]
name=Starlingx-CentOS-7.4.1708 - updates-source
baseurl=https://vault.centos.org/7.4.1708/updates/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.4.1708-virt-kvm]
name=Starlingx-CentOS-7.4.1708 - virt-kvm
baseurl=https://vault.centos.org/7.4.1708/virt/x86_64/kvm-common
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=0
[Starlingx-C7.4.1708-virt-kvm-source]
name=Starlingx-CentOS-7.4.1708 - virt-kvm-source
baseurl=https://vault.centos.org/7.4.1708/virt/Source/kvm-common
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.4.1708-virt-libvirt]
name=Starlingx-CentOS-7.4.1708 - virt-libvirt
baseurl=https://vault.centos.org/7.4.1708/virt/x86_64/libvirt-latest
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=0
[Starlingx-C7.4.1708-virt-libvirt-source]
name=Starlingx-CentOS-7.4.1708 - virt-libvirt-source
baseurl=https://vault.centos.org/7.4.1708/virt/Source/libvirt-latest
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.4.1708-cr]
name=Starlingx-CentOS-7.4.1708 - cr
baseurl=https://vault.centos.org/centos/7.4.1708/cr/x86_64
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.4.1708-cr-source]
name=Starlingx-CentOS-7.4.1708 - cr-source
baseurl=https://vault.centos.org/centos/7.4.1708/cr/Source
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1

117
centos-mirror-tools/yum.repos.d/StarlingX-Centos-7.5.repo
View File

@ -1,117 +0,0 @@
########
# Centos 7.5.1804
#
[Starlingx-C7.5.1804-cloud-pike]
name=Starlingx-CentOS-7.5.1804 - Cloud-pike
baseurl=https://vault.centos.org/7.5.1804/cloud/x86_64/openstack-pike/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.5.1804-cloud-pike-source]
name=Starlingx-CentOS-7.5.1804 - Cloud-pike-source
baseurl=https://vault.centos.org/7.5.1804/cloud/Source/openstack-pike/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.5.1804-extras]
name=Starlingx-CentOS-7.5.1804 - extras
baseurl=https://vault.centos.org/7.5.1804/extras/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.5.1804-extras-source]
name=Starlingx-CentOS-7.5.1804 - extras-source
baseurl=https://vault.centos.org/7.5.1804/extras/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.5.1804-os]
name=Starlingx-CentOS-7.5.1804 - os
baseurl=https://vault.centos.org/7.5.1804/os/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.5.1804-os-source]
name=Starlingx-CentOS-7.5.1804 - os-source
baseurl=https://vault.centos.org/7.5.1804/os/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.5.1804-paas-openshift]
name=Starlingx-CentOS-7.5.1804 - pass-openshift
baseurl=https://vault.centos.org/7.5.1804/paas/x86_64/openshift-origin311/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.5.1804-rt]
name=Starlingx-CentOS-7.5.1804 - rt
baseurl=https://vault.centos.org/7.5.1804/rt/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
# not available, might be updated later
# [Starlingx-C7.5.1804-rt-source]
# name=Starlingx-CentOS-7.5.1804 - rt-source
# baseurl=https://vault.centos.org/7.5.1804/rt/Source/
# gpgcheck=1
# gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
# enabled=1
[Starlingx-C7.5.1804-updates]
name=Starlingx-CentOS-7.5.1804 - updates
baseurl=https://vault.centos.org/7.5.1804/updates/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.5.1804-updates-source]
name=Starlingx-CentOS-7.5.1804 - updates-source
baseurl=https://vault.centos.org/7.5.1804/updates/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.5.1804-virt-kvm]
name=Starlingx-CentOS-7.5.1804 - virt-kvm
baseurl=https://vault.centos.org/7.5.1804/virt/x86_64/kvm-common
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.5.1804-virt-kvm-source]
name=Starlingx-CentOS-7.5.1804 - virt-kvm-source
baseurl=https://vault.centos.org/7.5.1804/virt/Source/kvm-common
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.5.1804-virt-libvirt]
name=Starlingx-CentOS-7.5.1804 - virt-libvirt
baseurl=https://vault.centos.org/7.5.1804/virt/x86_64/libvirt-latest
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=0
[Starlingx-C7.5.1804-virt-libvirt-source]
name=Starlingx-CentOS-7.5.1804 - virt-libvirt-source
baseurl=https://vault.centos.org/7.5.1804/virt/Source/libvirt-latest
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-C7.5.1804-virt-kubernetes-source]
name=Starlingx-CentOS-7.5.1804 - virt-kubernetes-source
baseurl=https://vault.centos.org/7.5.1804/virt/Source/kubernetes110
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1

178
centos-mirror-tools/yum.repos.d/StarlingX-Centos-7.6.repo
View File

@ -1,178 +0,0 @@
########
# Centos 7.6.1810
#
[StarlingX-C7.6.1810-atomic]
name=StarlingX-CentOS-7.6.1810 - atomic
baseurl=https://vault.centos.org/centos/7.6.1810/atomic/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-centosplus]
name=StarlingX-CentOS-7.6.1810 - centosplus
baseurl=https://vault.centos.org/centos/7.6.1810/centosplus/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-centosplus-source]
name=StarlingX-CentOS-7.6.1810 - centosplus-source
baseurl=https://vault.centos.org/7.6.1810/centosplus/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-cloud-pike]
name=StarlingX-CentOS-7.6.1810 - Cloud-pike
baseurl=https://vault.centos.org/centos/7.6.1810/cloud/x86_64/openstack-pike/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-cloud-pike-source]
name=StarlingX-CentOS-7.6.1810 - cloud-pike-source
baseurl=https://vault.centos.org/7.6.1810/cloud/Source/openstack-pike/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-extras]
name=StarlingX-CentOS-7.6.1810 - extras
baseurl=https://vault.centos.org/centos/7.6.1810/extras/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-extras-source]
name=StarlingX-CentOS-7.6.1810 - extras-source
baseurl=https://vault.centos.org/7.6.1810/extras/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-nfv-fdio]
name=StarlingX-CentOS-7.6.1810 - nfv
baseurl=https://vault.centos.org/centos/7.6.1810/nfv/x86_64/fdio/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-opstools]
name=StarlingX-CentOS-7.6.1810 - opstools
baseurl=https://vault.centos.org/centos/7.6.1810/opstools/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-opstools-source]
name=StarlingX-CentOS-7.6.1810 - opstools-source
baseurl=https://vault.centos.org/7.6.1810/opstools/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-os]
name=StarlingX-CentOS-7.6.1810 - os
baseurl=https://vault.centos.org/centos/7.6.1810/os/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-os-source]
name=StarlingX-CentOS-7.6.1810 - os-source
baseurl=https://vault.centos.org/7.6.1810/os/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-paas-openshift-origin]
name=StarlingX-CentOS-7.6.1810 - paas-openshift-origin
baseurl=https://vault.centos.org/centos/7.6.1810/paas/x86_64/openshift-origin/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-paas-openshift-origin311]
name=StarlingX-CentOS-7.6.1810 - paas-openshift-origin311
baseurl=https://vault.centos.org/centos/7.6.1810/paas/x86_64/openshift-origin311/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-rt]
name=StarlingX-CentOS-7.6.1810 - rt
baseurl=https://vault.centos.org/centos/7.6.1810/rt/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-sclo-sclo]
name=StarlingX-CentOS-7.6.1810 - sclo-sclo
baseurl=https://vault.centos.org/centos/7.6.1810/sclo/x86_64/sclo/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-storage-ceph-jewel]
name=StarlingX-CentOS-7.6.1810 - storage-ceph-jewel
baseurl=https://vault.centos.org/centos/7.6.1810/storage/x86_64/ceph-jewel/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-storage-ceph-luminous]
name=StarlingX-CentOS-7.6.1810 - storage-ceph-luminous
baseurl=https://vault.centos.org/centos/7.6.1810/storage/x86_64/ceph-luminous/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-storage-ceph-nautilus]
name=StarlingX-CentOS-7.6.1810 - storage-ceph-nautilus
baseurl=https://vault.centos.org/centos/7.6.1810/storage/x86_64/ceph-nautilus/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-storage-gluster-5]
name=StarlingX-CentOS-7.6.1810 - storage-gluster-5
baseurl=https://vault.centos.org/centos/7.6.1810/storage/x86_64/gluster-5/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-updates]
name=StarlingX-CentOS-7.6.1810 - updates
baseurl=https://vault.centos.org/centos/7.6.1810/updates/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-updates-source]
name=StarlingX-CentOS-7.6.1810 - updates-source
baseurl=https://vault.centos.org/7.6.1810/updates/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-virt-kvm]
name=StarlingX-CentOS-7.6.1810 - virt-kvm
baseurl=https://vault.centos.org/centos/7.6.1810/virt/x86_64/kvm-common/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.6.1810-virt-libvirt]
name=StarlingX-CentOS-7.6.1810 - virt-libvirt
baseurl=https://vault.centos.org/centos/7.6.1810/virt/x86_64/libvirt-latest/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=0
[StarlingX-C7.6.1810-sclo-rh]
name=StarlingX-CentOS-7.6.1810 - sclo-rh
baseurl=https://vault.centos.org/centos/7.6.1810/sclo/x86_64/rh/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1

164
centos-mirror-tools/yum.repos.d/StarlingX-Centos-7.7.repo
View File

@ -1,164 +0,0 @@
########
# Centos 7.7.1908
#
[StarlingX-C7.7.1908-atomic]
name=StarlingX-CentOS-7.7.1908 - atomic
baseurl=https://vault.centos.org/7.7.1908/atomic/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-centosplus]
name=StarlingX-CentOS-7.7.1908 - centosplus
baseurl=https://vault.centos.org/7.7.1908/centosplus/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-centosplus-source]
name=StarlingX-CentOS-7.7.1908 - centosplus-source
baseurl=https://vault.centos.org/7.7.1908/centosplus/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-extras]
name=StarlingX-CentOS-7.7.1908 - extras
baseurl=https://vault.centos.org/7.7.1908/extras/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-extras-source]
name=StarlingX-CentOS-7.7.1908 - extras-source
baseurl=https://vault.centos.org/7.7.1908/extras/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-nfv-fdio]
name=StarlingX-CentOS-7.7.1908 - nfv
baseurl=https://vault.centos.org/7.7.1908/nfv/x86_64/fdio/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-opstools]
name=StarlingX-CentOS-7.7.1908 - opstools
baseurl=https://vault.centos.org/7.7.1908/opstools/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
# [StarlingX-C7.7.1908-opstools-source]
# name=StarlingX-CentOS-7.7.1908 - opstools-source
# baseurl=https://vault.centos.org/7.7.1908/opstools/Source/
# gpgcheck=1
# gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
# enabled=1
[StarlingX-C7.7.1908-os]
name=StarlingX-CentOS-7.7.1908 - os
baseurl=https://vault.centos.org/7.7.1908/os/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-os-source]
name=StarlingX-CentOS-7.7.1908 - os-source
baseurl=https://vault.centos.org/7.7.1908/os/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-paas-openshift-origin]
name=StarlingX-CentOS-7.7.1908 - paas-openshift-origin
baseurl=https://vault.centos.org/7.7.1908/paas/x86_64/openshift-origin/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-paas-openshift-origin311]
name=StarlingX-CentOS-7.7.1908 - paas-openshift-origin311
baseurl=https://vault.centos.org/7.7.1908/paas/x86_64/openshift-origin311/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-rt]
name=StarlingX-CentOS-7.7.1908 - rt
baseurl=https://vault.centos.org/7.7.1908/rt/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-sclo-sclo]
name=StarlingX-CentOS-7.7.1908 - sclo-sclo
baseurl=https://vault.centos.org/7.7.1908/sclo/x86_64/sclo/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-storage-ceph-jewel]
name=StarlingX-CentOS-7.7.1908 - storage-ceph-jewel
baseurl=https://vault.centos.org/7.7.1908/storage/x86_64/ceph-jewel/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-storage-ceph-luminous]
name=StarlingX-CentOS-7.7.1908 - storage-ceph-luminous
baseurl=https://vault.centos.org/7.7.1908/storage/x86_64/ceph-luminous/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-storage-ceph-nautilus]
name=StarlingX-CentOS-7.7.1908 - storage-ceph-nautilus
baseurl=https://vault.centos.org/7.7.1908/storage/x86_64/ceph-nautilus/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-storage-gluster-5]
name=StarlingX-CentOS-7.7.1908 - storage-gluster-5
baseurl=https://vault.centos.org/7.7.1908/storage/x86_64/gluster-5/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-updates]
name=StarlingX-CentOS-7.7.1908 - updates
baseurl=https://vault.centos.org/7.7.1908/updates/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-updates-source]
name=StarlingX-CentOS-7.7.1908 - updates-source
baseurl=https://vault.centos.org/7.7.1908/updates/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-virt-kvm]
name=StarlingX-CentOS-7.7.1908 - virt-kvm
baseurl=https://vault.centos.org/7.7.1908/virt/x86_64/kvm-common/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.7.1908-virt-libvirt]
name=StarlingX-CentOS-7.7.1908 - virt-libvirt
baseurl=https://vault.centos.org/7.7.1908/virt/x86_64/libvirt-latest/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=0
[StarlingX-C7.7.1908-sclo-rh]
name=StarlingX-CentOS-7.7.1908 - sclo-rh
baseurl=https://vault.centos.org/7.7.1908/sclo/x86_64/rh/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1

164
centos-mirror-tools/yum.repos.d/StarlingX-Centos-7.8.repo
View File

@ -1,164 +0,0 @@
########
# Centos 7.8.2003
#
[StarlingX-C7.8.2003-atomic]
name=StarlingX-CentOS-7.8.2003 - atomic
baseurl=https://vault.centos.org/centos/7.8.2003/atomic/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-centosplus]
name=StarlingX-CentOS-7.8.2003 - centosplus
baseurl=https://vault.centos.org/centos/7.8.2003/centosplus/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-centosplus-source]
name=StarlingX-CentOS-7.8.2003 - centosplus-source
baseurl=https://vault.centos.org/7.8.2003/centosplus/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-extras]
name=StarlingX-CentOS-7.8.2003 - extras
baseurl=https://vault.centos.org/centos/7.8.2003/extras/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-extras-source]
name=StarlingX-CentOS-7.8.2003 - extras-source
baseurl=https://vault.centos.org/7.8.2003/extras/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-nfv-fdio]
name=StarlingX-CentOS-7.8.2003 - nfv
baseurl=https://vault.centos.org/centos/7.8.2003/nfv/x86_64/fdio/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-opstools]
name=StarlingX-CentOS-7.8.2003 - opstools
baseurl=https://vault.centos.org/centos/7.8.2003/opstools/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
# [StarlingX-C7.8.2003-opstools-source]
# name=StarlingX-CentOS-7.8.2003 - opstools-source
# baseurl=https://vault.centos.org/7.8.2003/opstools/Source/
# gpgcheck=1
# gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
# enabled=1
[StarlingX-C7.8.2003-os]
name=StarlingX-CentOS-7.8.2003 - os
baseurl=https://vault.centos.org/centos/7.8.2003/os/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-os-source]
name=StarlingX-CentOS-7.8.2003 - os-source
baseurl=https://vault.centos.org/7.8.2003/os/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-paas-openshift-origin]
name=StarlingX-CentOS-7.8.2003 - paas-openshift-origin
baseurl=https://vault.centos.org/centos/7.8.2003/paas/x86_64/openshift-origin/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-paas-openshift-origin311]
name=StarlingX-CentOS-7.8.2003 - paas-openshift-origin311
baseurl=https://vault.centos.org/centos/7.8.2003/paas/x86_64/openshift-origin311/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-rt]
name=StarlingX-CentOS-7.8.2003 - rt
baseurl=https://vault.centos.org/centos/7.8.2003/rt/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-sclo-sclo]
name=StarlingX-CentOS-7.8.2003 - sclo-sclo
baseurl=https://vault.centos.org/centos/7.8.2003/sclo/x86_64/sclo/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-storage-ceph-jewel]
name=StarlingX-CentOS-7.8.2003 - storage-ceph-jewel
baseurl=https://vault.centos.org/centos/7.8.2003/storage/x86_64/ceph-jewel/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-storage-ceph-luminous]
name=StarlingX-CentOS-7.8.2003 - storage-ceph-luminous
baseurl=https://vault.centos.org/centos/7.8.2003/storage/x86_64/ceph-luminous/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-storage-ceph-nautilus]
name=StarlingX-CentOS-7.8.2003 - storage-ceph-nautilus
baseurl=https://vault.centos.org/centos/7.8.2003/storage/x86_64/ceph-nautilus/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-storage-gluster-5]
name=StarlingX-CentOS-7.8.2003 - storage-gluster-5
baseurl=https://vault.centos.org/centos/7.8.2003/storage/x86_64/gluster-5/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-updates]
name=StarlingX-CentOS-7.8.2003 - updates
baseurl=https://vault.centos.org/centos/7.8.2003/updates/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-updates-source]
name=StarlingX-CentOS-7.8.2003 - updates-source
baseurl=https://vault.centos.org/7.8.2003/updates/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-virt-kvm]
name=StarlingX-CentOS-7.8.2003 - virt-kvm
baseurl=https://vault.centos.org/centos/7.8.2003/virt/x86_64/kvm-common/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.8.2003-virt-libvirt]
name=StarlingX-CentOS-7.8.2003 - virt-libvirt
baseurl=https://vault.centos.org/centos/7.8.2003/virt/x86_64/libvirt-latest/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=0
[StarlingX-C7.8.2003-sclo-rh]
name=StarlingX-CentOS-7.8.2003 - sclo-rh
baseurl=https://vault.centos.org/centos/7.8.2003/sclo/x86_64/rh/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1

171
centos-mirror-tools/yum.repos.d/StarlingX-Centos-7.9.repo
View File

@ -1,171 +0,0 @@
########
# Centos 7.9.2009
#
[StarlingX-C7.9.2009-atomic]
name=StarlingX-CentOS-7.9.2009 - atomic
baseurl=http://mirror.centos.org/centos/7.9.2009/atomic/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-centosplus]
name=StarlingX-CentOS-7.9.2009 - centosplus
baseurl=http://mirror.centos.org/centos/7.9.2009/centosplus/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-centosplus-source]
name=StarlingX-CentOS-7.9.2009 - centosplus-source
baseurl=https://vault.centos.org/7.9.2009/centosplus/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-extras]
name=StarlingX-CentOS-7.9.2009 - extras
baseurl=http://mirror.centos.org/centos/7.9.2009/extras/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-extras-source]
name=StarlingX-CentOS-7.9.2009 - extras-source
baseurl=https://vault.centos.org/7.9.2009/extras/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-nfv-fdio]
name=StarlingX-CentOS-7.9.2009 - nfv
baseurl=http://mirror.centos.org/centos/7.9.2009/nfv/x86_64/fdio/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-opstools]
name=StarlingX-CentOS-7.9.2009 - opstools
baseurl=http://mirror.centos.org/centos/7.9.2009/opstools/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
# [StarlingX-C7.9.2009-opstools-source]
# name=StarlingX-CentOS-7.9.2009 - opstools-source
# baseurl=https://vault.centos.org/7.9.2009/opstools/Source/
# gpgcheck=1
# gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
# enabled=1
[StarlingX-C7.9.2009-os]
name=StarlingX-CentOS-7.9.2009 - os
baseurl=http://mirror.centos.org/centos/7.9.2009/os/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-os-source]
name=StarlingX-CentOS-7.9.2009 - os-source
baseurl=https://vault.centos.org/7.9.2009/os/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-paas-openshift-origin]
name=StarlingX-CentOS-7.9.2009 - paas-openshift-origin
baseurl=http://mirror.centos.org/centos/7.9.2009/paas/x86_64/openshift-origin/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-paas-openshift-origin311]
name=StarlingX-CentOS-7.9.2009 - paas-openshift-origin311
baseurl=http://mirror.centos.org/centos/7.9.2009/paas/x86_64/openshift-origin311/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-rt-source]
name=StarlingX-CentOS-7.9.2009 - rt-source
baseurl=https://vault.centos.org/centos/7.9.2009/rt/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-rt]
name=StarlingX-CentOS-7.9.2009 - rt
baseurl=http://mirror.centos.org/centos/7.9.2009/rt/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-sclo-sclo]
name=StarlingX-CentOS-7.9.2009 - sclo-sclo
baseurl=http://mirror.centos.org/centos/7.9.2009/sclo/x86_64/sclo/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-storage-ceph-jewel]
name=StarlingX-CentOS-7.9.2009 - storage-ceph-jewel
baseurl=http://mirror.centos.org/centos/7.9.2009/storage/x86_64/ceph-jewel/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-storage-ceph-luminous]
name=StarlingX-CentOS-7.9.2009 - storage-ceph-luminous
baseurl=http://mirror.centos.org/centos/7.9.2009/storage/x86_64/ceph-luminous/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-storage-ceph-nautilus]
name=StarlingX-CentOS-7.9.2009 - storage-ceph-nautilus
baseurl=http://mirror.centos.org/centos/7.9.2009/storage/x86_64/ceph-nautilus/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-storage-gluster-5]
name=StarlingX-CentOS-7.9.2009 - storage-gluster-5
baseurl=http://mirror.centos.org/centos/7.9.2009/storage/x86_64/gluster-5/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-updates]
name=StarlingX-CentOS-7.9.2009 - updates
baseurl=http://mirror.centos.org/centos/7.9.2009/updates/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-updates-source]
name=StarlingX-CentOS-7.9.2009 - updates-source
baseurl=https://vault.centos.org/7.9.2009/updates/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-virt-kvm]
name=StarlingX-CentOS-7.9.2009 - virt-kvm
baseurl=http://mirror.centos.org/centos/7.9.2009/virt/x86_64/kvm-common/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[StarlingX-C7.9.2009-virt-libvirt]
name=StarlingX-CentOS-7.9.2009 - virt-libvirt
baseurl=http://mirror.centos.org/centos/7.9.2009/virt/x86_64/libvirt-latest/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=0
[StarlingX-C7.9.2009-sclo-rh]
name=StarlingX-CentOS-7.9.2009 - sclo-rh
baseurl=http://mirror.centos.org/centos/7.9.2009/sclo/x86_64/rh/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1

76
centos-mirror-tools/yum.repos.d/StarlingX-Centos-8.0.repo
View File

@ -1,76 +0,0 @@
########
# Centos 8.0.1905
#
[StarlingX-C8.0.1905-BaseOS]
name=StarlingX-CentOS-8.0.1905 - BaseOS
baseurl=https://vault.centos.org/8.0.1905/BaseOS/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.0.1905-BaseOS-Source]
name=StarlingX-CentOS-8.0.1905 - BaseOS Source
baseurl=https://vault.centos.org/8.0.1905/BaseOS/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.0.1905-AppStream]
name=StarlingX-CentOS-8.0.1905 - AppStream
baseurl=https://vault.centos.org/8.0.1905/AppStream/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.0.1905-AppStream-Source]
name=StarlingX-CentOS-8.0.1905 - AppStream Source
baseurl=https://vault.centos.org/8.0.1905/AppStream/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.0.1905-PowerTools]
name=StarlingX-CentOS-8.0.1905 - PowerTools
baseurl=https://vault.centos.org/8.0.1905/PowerTools/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.0.1905-PowerTools-Source]
name=StarlingX-CentOS-8.0.1905 - PowerTools Source
baseurl=https://vault.centos.org/8.0.1905/PowerTools/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.0.1905-centosplus]
name=StarlingX-CentOS-8.0.1905 - centosplus
baseurl=https://vault.centos.org/8.0.1905/centosplus/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.0.1905-centosplus-Source]
name=StarlingX-CentOS-8.0.1905 - centosplus Source
baseurl=https://vault.centos.org/8.0.1905/centosplus/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.0.1905-extras]
name=StarlingX-CentOS-8.0.1905 - extras
baseurl=https://vault.centos.org/8.0.1905/extras/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.0.1905-extras-Source]
name=StarlingX-CentOS-8.0.1905 - extras Source
baseurl=https://vault.centos.org/8.0.1905/extras/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1

92
centos-mirror-tools/yum.repos.d/StarlingX-Centos-8.1.repo
View File

@ -1,92 +0,0 @@
########
# Centos 8.1.1911
#
[StarlingX-C8.1.1911-BaseOS]
name=StarlingX-CentOS-8.1.1911 - BaseOS
baseurl=https://vault.centos.org/8.1.1911/BaseOS/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.1.1911-BaseOS-Source]
name=StarlingX-CentOS-8.1.1911 - BaseOS Source
baseurl=https://vault.centos.org/8.1.1911/BaseOS/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.1.1911-AppStream]
name=StarlingX-CentOS-8.1.1911 - AppStream
baseurl=https://vault.centos.org/8.1.1911/AppStream/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.1.1911-AppStream-Source]
name=StarlingX-CentOS-8.1.1911 - AppStream Source
baseurl=https://vault.centos.org/8.1.1911/AppStream/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.1.1911-HighAvailability]
name=StarlingX-CentOS-8.1.1911 - HighAvailability
baseurl=https://vault.centos.org/8.1.1911/HighAvailability/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.1.1911-HighAvailability-Source]
name=StarlingX-CentOS-8.1.1911 - HighAvailability Source
baseurl=https://vault.centos.org/8.1.1911/HighAvailability/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.1.1911-PowerTools]
name=StarlingX-CentOS-8.1.1911 - PowerTools
baseurl=https://vault.centos.org/8.1.1911/PowerTools/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.1.1911-PowerTools-Source]
name=StarlingX-CentOS-8.1.1911 - PowerTools Source
baseurl=https://vault.centos.org/8.1.1911/PowerTools/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.1.1911-centosplus]
name=StarlingX-CentOS-8.1.1911 - centosplus
baseurl=https://vault.centos.org/8.1.1911/centosplus/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.1.1911-centosplus-Source]
name=StarlingX-CentOS-8.1.1911 - centosplus Source
baseurl=https://vault.centos.org/8.1.1911/centosplus/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.1.1911-extras]
name=StarlingX-CentOS-8.1.1911 - extras
baseurl=https://vault.centos.org/8.1.1911/extras/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.1.1911-extras-Source]
name=StarlingX-CentOS-8.1.1911 - extras Source
baseurl=https://vault.centos.org/8.1.1911/extras/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1

92
centos-mirror-tools/yum.repos.d/StarlingX-Centos-8.2.repo
View File

@ -1,92 +0,0 @@
########
# Centos 8.2.2004
#
[StarlingX-C8.2.2004-BaseOS]
name=StarlingX-CentOS-8.2.2004 - BaseOS
baseurl=https://vault.centos.org/centos/8.2.2004/BaseOS/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.2.2004-BaseOS-Source]
name=StarlingX-CentOS-8.2.2004 - BaseOS Source
baseurl=https://vault.centos.org/8.2.2004/BaseOS/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.2.2004-AppStream]
name=StarlingX-CentOS-8.2.2004 - AppStream
baseurl=https://vault.centos.org/centos/8.2.2004/AppStream/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.2.2004-AppStream-Source]
name=StarlingX-CentOS-8.2.2004 - AppStream Source
baseurl=https://vault.centos.org/8.2.2004/AppStream/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.2.2004-HighAvailability]
name=StarlingX-CentOS-8.2.2004 - HighAvailability
baseurl=https://vault.centos.org/centos/8.2.2004/HighAvailability/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.2.2004-HighAvailability-Source]
name=StarlingX-CentOS-8.2.2004 - HighAvailability Source
baseurl=https://vault.centos.org/8.2.2004/HighAvailability/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.2.2004-PowerTools]
name=StarlingX-CentOS-8.2.2004 - PowerTools
baseurl=https://vault.centos.org/centos/8.2.2004/PowerTools/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.2.2004-PowerTools-Source]
name=StarlingX-CentOS-8.2.2004 - PowerTools Source
baseurl=https://vault.centos.org/8.2.2004/PowerTools/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.2.2004-centosplus]
name=StarlingX-CentOS-8.2.2004 - centosplus
baseurl=https://vault.centos.org/centos/8.2.2004/centosplus/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.2.2004-centosplus-Source]
name=StarlingX-CentOS-8.2.2004 - centosplus Source
baseurl=https://vault.centos.org/8.2.2004/centosplus/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.2.2004-extras]
name=StarlingX-CentOS-8.2.2004 - extras
baseurl=https://vault.centos.org/centos/8.2.2004/extras/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.2.2004-extras-Source]
name=StarlingX-CentOS-8.2.2004 - extras Source
baseurl=https://vault.centos.org/8.2.2004/extras/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1

92
centos-mirror-tools/yum.repos.d/StarlingX-Centos-8.3.repo
View File

@ -1,92 +0,0 @@
########
# Centos 8.3.2011
#
[StarlingX-C8.3.2011-BaseOS]
name=StarlingX-CentOS-8.3.2011 - BaseOS
baseurl=https://vault.centos.org/8.3.2011/BaseOS/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.3.2011-BaseOS-Source]
name=StarlingX-CentOS-8.3.2011 - BaseOS Source
baseurl=https://vault.centos.org/8.3.2011/BaseOS/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.3.2011-AppStream]
name=StarlingX-CentOS-8.3.2011 - AppStream
baseurl=https://vault.centos.org/8.3.2011/AppStream/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.3.2011-AppStream-Source]
name=StarlingX-CentOS-8.3.2011 - AppStream Source
baseurl=https://vault.centos.org/8.3.2011/AppStream/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.3.2011-HighAvailability]
name=StarlingX-CentOS-8.3.2011 - HighAvailability
baseurl=https://vault.centos.org/8.3.2011/HighAvailability/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.3.2011-HighAvailability-Source]
name=StarlingX-CentOS-8.3.2011 - HighAvailability Source
baseurl=https://vault.centos.org/8.3.2011/HighAvailability/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.3.2011-PowerTools]
name=StarlingX-CentOS-8.3.2011 - PowerTools
baseurl=https://vault.centos.org/8.3.2011/PowerTools/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.3.2011-PowerTools-Source]
name=StarlingX-CentOS-8.3.2011 - PowerTools Source
baseurl=https://vault.centos.org/8.3.2011/PowerTools/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.3.2011-centosplus]
name=StarlingX-CentOS-8.3.2011 - centosplus
baseurl=https://vault.centos.org/8.3.2011/centosplus/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.3.2011-centosplus-Source]
name=StarlingX-CentOS-8.3.2011 - centosplus Source
baseurl=https://vault.centos.org/8.3.2011/centosplus/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.3.2011-extras]
name=StarlingX-CentOS-8.3.2011 - extras
baseurl=https://vault.centos.org/8.3.2011/extras/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.3.2011-extras-Source]
name=StarlingX-CentOS-8.3.2011 - extras Source
baseurl=https://vault.centos.org/8.3.2011/extras/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1

92
centos-mirror-tools/yum.repos.d/StarlingX-Centos-8.4.repo
View File

@ -1,92 +0,0 @@
########
# Centos 8.4.2105
#
[StarlingX-C8.4.2105-BaseOS]
name=StarlingX-CentOS-8.4.2105 - BaseOS
baseurl=https://vault.centos.org/8.4.2105/BaseOS/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.4.2105-BaseOS-Source]
name=StarlingX-CentOS-8.4.2105 - BaseOS Source
baseurl=https://vault.centos.org/8.4.2105/BaseOS/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.4.2105-AppStream]
name=StarlingX-CentOS-8.4.2105 - AppStream
baseurl=https://vault.centos.org/8.4.2105/AppStream/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.4.2105-AppStream-Source]
name=StarlingX-CentOS-8.4.2105 - AppStream Source
baseurl=https://vault.centos.org/8.4.2105/AppStream/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.4.2105-HighAvailability]
name=StarlingX-CentOS-8.4.2105 - HighAvailability
baseurl=https://vault.centos.org/8.4.2105/HighAvailability/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.4.2105-HighAvailability-Source]
name=StarlingX-CentOS-8.4.2105 - HighAvailability Source
baseurl=https://vault.centos.org/8.4.2105/HighAvailability/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.4.2105-PowerTools]
name=StarlingX-CentOS-8.4.2105 - PowerTools
baseurl=https://vault.centos.org/8.4.2105/PowerTools/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.4.2105-PowerTools-Source]
name=StarlingX-CentOS-8.4.2105 - PowerTools Source
baseurl=https://vault.centos.org/8.4.2105/PowerTools/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.4.2105-centosplus]
name=StarlingX-CentOS-8.4.2105 - centosplus
baseurl=https://vault.centos.org/8.4.2105/centosplus/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.4.2105-centosplus-Source]
name=StarlingX-CentOS-8.4.2105 - centosplus Source
baseurl=https://vault.centos.org/8.4.2105/centosplus/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.4.2105-extras]
name=StarlingX-CentOS-8.4.2105 - extras
baseurl=https://vault.centos.org/8.4.2105/extras/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.4.2105-extras-Source]
name=StarlingX-CentOS-8.4.2105 - extras Source
baseurl=https://vault.centos.org/8.4.2105/extras/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1

92
centos-mirror-tools/yum.repos.d/StarlingX-Centos-8.5.repo
View File

@ -1,92 +0,0 @@
########
# Centos 8.5.2111
#
[StarlingX-C8.5.2111-BaseOS]
name=StarlingX-CentOS-8.5.2111 - BaseOS
baseurl=https://vault.centos.org/8.5.2111/BaseOS/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.5.2111-BaseOS-Source]
name=StarlingX-CentOS-8.5.2111 - BaseOS Source
baseurl=https://vault.centos.org/8.5.2111/BaseOS/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.5.2111-AppStream]
name=StarlingX-CentOS-8.5.2111 - AppStream
baseurl=https://vault.centos.org/8.5.2111/AppStream/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.5.2111-AppStream-Source]
name=StarlingX-CentOS-8.5.2111 - AppStream Source
baseurl=https://vault.centos.org/8.5.2111/AppStream/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.5.2111-HighAvailability]
name=StarlingX-CentOS-8.5.2111 - HighAvailability
baseurl=https://vault.centos.org/8.5.2111/HighAvailability/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.5.2111-HighAvailability-Source]
name=StarlingX-CentOS-8.5.2111 - HighAvailability Source
baseurl=https://vault.centos.org/8.5.2111/HighAvailability/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.5.2111-PowerTools]
name=StarlingX-CentOS-8.5.2111 - PowerTools
baseurl=https://vault.centos.org/8.5.2111/PowerTools/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.5.2111-PowerTools-Source]
name=StarlingX-CentOS-8.5.2111 - PowerTools Source
baseurl=https://vault.centos.org/8.5.2111/PowerTools/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.5.2111-centosplus]
name=StarlingX-CentOS-8.5.2111 - centosplus
baseurl=https://vault.centos.org/8.5.2111/centosplus/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.5.2111-centosplus-Source]
name=StarlingX-CentOS-8.5.2111 - centosplus Source
baseurl=https://vault.centos.org/8.5.2111/centosplus/Source/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
[StarlingX-C8.5.2111-extras]
name=StarlingX-CentOS-8.5.2111 - extras
baseurl=https://vault.centos.org/8.5.2111/extras/x86_64/os/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
enabled=1
# [StarlingX-C8.5.2111-extras-Source]
# name=StarlingX-CentOS-8.5.2111 - extras Source
# baseurl=https://vault.centos.org/8.5.2111/extras/Source/
# gpgcheck=1
# gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-8
# enabled=1

48
centos-mirror-tools/yum.repos.d/StarlingX-EPEL-7.repo
View File

@ -1,48 +0,0 @@
########
#### EPEL 7
[Starlingx-epel-7]
name=Starlingx-Epel-7
baseurl=https://dl.fedoraproject.org/pub/epel/7/x86_64/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7
enabled=1
[Starlingx-epel-7-debug]
name=Starlingx-Epel-7-debug
baseurl=https://dl.fedoraproject.org/pub/epel/7/x86_64/debug
gpgcheck=0
#gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-epel-7-source]
name=Starlingx-Epel-7-source
baseurl=https://dl.fedoraproject.org/pub/epel/7/source/tree/
gpgcheck=0
#gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-epel-7-testing]
name=Starlingx-Epel-7-testing
baseurl=https://dl.fedoraproject.org/pub/epel/testing/7/x86_64/
gpgcheck=0
#gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-epel-7-testing-debug]
name=Starlingx-Epel-7-testing-debug
baseurl=https://dl.fedoraproject.org/pub/epel/testing/7/x86_64/debug/
gpgcheck=0
#gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[Starlingx-epel-7-testing-source]
name=Starlingx-Epel-7-testing-source
baseurl=https://dl.fedoraproject.org/pub/epel/testing/7/source/tree/
gpgcheck=0
#gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1

18
centos-mirror-tools/yum.repos.d/StarlingX-EPEL-8.repo
View File

@ -1,18 +0,0 @@
########
#### EPEL 8
[Starlingx-epel-8-Everything]
name=Starlingx-Epel-8
baseurl=https://dl.fedoraproject.org/pub/epel/8/Everything/x86_64/
gpgcheck=1
gpgkey=file:///export/config/rpm-gpg-keys/RPM-GPG-KEY-EPEL-8
enabled=1
[Starlingx-epel-8-Everything-source]
name=Starlingx-Epel-8-Everything-source
baseurl=https://dl.fedoraproject.org/pub/epel/8/Everything/source/tree/
gpgcheck=0
#gpgkey=file:///export/config/rpm-gpg-keys/RPM-GPG-KEY-EPEL-8
enabled=1

7
centos-mirror-tools/yum.repos.d/StarlingX_3rd_buildlogs-seed_centos_org.repo
View File

@ -1,7 +0,0 @@
#####
# buildlogs-seed.centos.org
[Starlingx-buildlogs-seed.centos.org_c7.1708.00]
name=Starlingx-buildlogs-seed.centos.org_c7.1708.00 - buildlogs-seed.centos.org_c7.1708.00
baseurl=http://buildlogs-seed.centos.org/c7.1708.00
enabled=1

7
centos-mirror-tools/yum.repos.d/StarlingX_3rd_buildlogs_centos_org.repo
View File

@ -1,7 +0,0 @@
#####
# buildlogs.centos.org
[Starlingx-buildlogs.centos.org_c7.1708.u.i386]
name=Starlingx-buildlogs.centos.org_c7.1708.u.i386 - buildlogs.centos.org_c7.1708.u.i386
baseurl=https://buildlogs.centos.org/c7.1708.u.i386
enabled=1

16
centos-mirror-tools/yum.repos.d/StarlingX_3rd_download_docker_com.repo
View File

@ -1,16 +0,0 @@
#####
# download.docker.com
[Starlingx-download.docker.com_linux_centos_7_source_stable]
name=Starlingx-download.docker.com_linux_centos_7_source_stable - download.docker.com_linux_centos_7_source_stable
baseurl=https://download.docker.com/linux/centos/7/source/stable
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-DOCKER
enabled=1
[Starlingx-download.docker.com_linux_centos_7_x86_64_stable]
name=Starlingx-download.docker.com_linux_centos_7_x86_64_stable - download.docker.com_linux_centos_7_x86_64_stable
baseurl=https://download.docker.com/linux/centos/7/x86_64/stable
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-DOCKER
enabled=1

7
centos-mirror-tools/yum.repos.d/StarlingX_3rd_ftp_iij_ad_jp.repo
View File

@ -1,7 +0,0 @@
####
# ftp.iij.ad.jp
[Starlingx-ftp.iij.ad.jp_pub_linux_centos_7_rt_x86_64]
name=Starlingx-ftp.iij.ad.jp_pub_linux_centos_7_rt_x86_64 - ftp.iij.ad.jp_pub_linux_centos_7_rt_x86_64
baseurl=http://ftp.iij.ad.jp/pub/linux/centos/7/rt/x86_64
enabled=1

15
centos-mirror-tools/yum.repos.d/StarlingX_3rd_katacontainer.repo
View File

@ -1,15 +0,0 @@
[home_katacontainers_releases_x86_64_stable-1.11]
name=Branch project for Kata Containers branch stable-1.11 (CentOS_7)
type=rpm-md
baseurl=http://download.opensuse.org/repositories/home:/katacontainers:/releases:/x86_64:/stable-1.11/CentOS_7/
gpgcheck=1
gpgkey=http://download.opensuse.org/repositories/home:/katacontainers:/releases:/x86_64:/stable-1.11/CentOS_7/repodata/repomd.xml.key
enabled=0
[STX_MIRROR_katacontainers_releases_x86_64_stable-1.11]
name=Branch project for Kata Containers branch stable-1.11 (CentOS_7) STX_MIRROR
type=rpm-md
baseurl=https://mirror.starlingx.windriver.com/mirror/centos/download.opensuse.org/repositories/home:/katacontainers:/releases:/x86_64:/stable-1.11/CentOS_7/
gpgcheck=0
enabled=1

7
centos-mirror-tools/yum.repos.d/StarlingX_3rd_linuxsoft_cern_ch.repo
View File

@ -1,7 +0,0 @@
#####
# linuxsoft.cern.ch
[Starlingx-linuxsoft.cern.ch_cern_centos_7.5_rt_Sources]
name=Starlingx-linuxsoft.cern.ch_cern_centos_7.5_rt_Sources - linuxsoft.cern.ch_cern_centos_7.5_rt_Sources
baseurl=http://linuxsoft.cern.ch/cern/centos/7.5/rt/Sources/
enabled=0

7
centos-mirror-tools/yum.repos.d/StarlingX_3rd_www_rpmfind_net.repo
View File

@ -1,7 +0,0 @@
#####
# www.rpmfind.net
[Starlingx-www.rpmfind.net_linux_epel_7_x86_64]
name=Starlingx-www.rpmfind.net_linux_epel_7_x86_64 - www.rpmfind.net_linux_epel_7_x86_64
baseurl=https://www.rpmfind.net/linux/epel/7/x86_64
enabled=1

41
centos-mirror-tools/yum.repos.d/StarlingX_CentOS-OpenStack-queens.repo
View File

@ -1,41 +0,0 @@
# CentOS-OpenStack-queens.repo
#
# Please see http://wiki.centos.org/SpecialInterestGroup/Cloud for more
# information
[centos-openstack-queens]
name=CentOS-7 - OpenStack queens
baseurl=http://mirror.centos.org/centos/7/cloud/x86_64/openstack-queens/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud
exclude=sip,PyQt4
[centos-openstack-queens-test]
name=CentOS-7 - OpenStack queens Testing
baseurl=https://buildlogs.centos.org/centos/7/cloud/x86_64/openstack-queens/
gpgcheck=0
enabled=0
exclude=sip,PyQt4
[centos-openstack-queens-debuginfo]
name=CentOS-7 - OpenStack queens - Debug
baseurl=http://debuginfo.centos.org/centos/7/cloud/x86_64/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud
exclude=sip,PyQt4
[centos-openstack-Queens-source]
name=CentOS-7 - OpenStack Queens - Source
baseurl=https://vault.centos.org/centos/7.5.1804/cloud/Source/openstack-queens/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud
exclude=sip,PyQt4
[rdo-trunk-queens-tested]
name=OpenStack queens Trunk Tested
baseurl=https://trunk.rdoproject.org/centos7-queens/current-passed-ci/
gpgcheck=0
enabled=0

41
centos-mirror-tools/yum.repos.d/StarlingX_CentOS-OpenStack-rocky.repo
View File

@ -1,41 +0,0 @@
# CentOS-OpenStack-queens.repo
#
# Please see http://wiki.centos.org/SpecialInterestGroup/Cloud for more
# information
[centos-openstack-rocky]
name=CentOS-7 - OpenStack rocky
baseurl=http://mirror.centos.org/centos/7/cloud/x86_64/openstack-rocky/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud
exclude=sip,PyQt4
[centos-openstack-rocky-test]
name=CentOS-7 - OpenStack rocky Testing
baseurl=https://buildlogs.centos.org/centos/7/cloud/x86_64/openstack-rocky/
gpgcheck=0
enabled=0
exclude=sip,PyQt4
[centos-openstack-rocky-debuginfo]
name=CentOS-7 - OpenStack rocky - Debug
baseurl=http://debuginfo.centos.org/centos/7/cloud/x86_64/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud
exclude=sip,PyQt4
[centos-openstack-Rocky-source]
name=CentOS-7 - OpenStack Rocky - Source
baseurl=https://vault.centos.org/centos/7.5.1804/cloud/Source/openstack-rocky/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud
exclude=sip,PyQt4
[rdo-trunk-rocky-tested]
name=OpenStack rocky Trunk Tested
baseurl=https://trunk.rdoproject.org/centos7-rocky/current-passed-ci/
gpgcheck=0
enabled=0

41
centos-mirror-tools/yum.repos.d/StarlingX_CentOS-OpenStack-stein.repo
View File

@ -1,41 +0,0 @@
# CentOS-OpenStack-stein.repo
#
# Please see http://wiki.centos.org/SpecialInterestGroup/Cloud for more
# information
[centos-openstack-stein]
name=CentOS-7 - OpenStack stein
baseurl=http://mirror.centos.org/centos/7/cloud/x86_64/openstack-stein/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud
exclude=sip,PyQt4
[centos-openstack-stein-test]
name=CentOS-7 - OpenStack stein Testing
baseurl=https://buildlogs.centos.org/centos/7/cloud/x86_64/openstack-stein/
gpgcheck=0
enabled=0
exclude=sip,PyQt4
[centos-openstack-stein-debuginfo]
name=CentOS-7 - OpenStack stein - Debug
baseurl=http://debuginfo.centos.org/centos/7/cloud/x86_64/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud
exclude=sip,PyQt4
[centos-openstack-Stein-source]
name=CentOS-7 - OpenStack Stein - Source
baseurl=https://vault.centos.org/centos/7.6.1810/cloud/Source/openstack-stein/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud
exclude=sip,PyQt4
[rdo-trunk-stein-tested]
name=OpenStack stein Trunk Tested
baseurl=https://trunk.rdoproject.org/centos7-stein/current-passed-ci/
gpgcheck=0
enabled=0

41
centos-mirror-tools/yum.repos.d/StarlingX_CentOS-OpenStack-train.repo
View File

@ -1,41 +0,0 @@
# CentOS-OpenStack-train.repo
#
# Please see http://wiki.centos.org/SpecialInterestGroup/Cloud for more
# information
[centos-openstack-train]
name=CentOS-7 - OpenStack train
baseurl=http://mirror.centos.org/centos/7/cloud/x86_64/openstack-train/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud
exclude=sip,PyQt4
[centos-openstack-train-test]
name=CentOS-7 - OpenStack train Testing
baseurl=https://buildlogs.centos.org/centos/7/cloud/x86_64/openstack-train/
gpgcheck=0
enabled=0
exclude=sip,PyQt4
[centos-openstack-train-debuginfo]
name=CentOS-7 - OpenStack train - Debug
baseurl=http://debuginfo.centos.org/centos/7/cloud/x86_64/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud
exclude=sip,PyQt4
[centos-openstack-train-source]
name=CentOS-7 - OpenStack train - Source
baseurl=https://vault.centos.org/centos/7.7.1908/cloud/Source/openstack-train/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud
exclude=sip,PyQt4
[rdo-trunk-train-tested]
name=OpenStack train Trunk Tested
baseurl=https://trunk.rdoproject.org/centos7-train/current-passed-ci/
gpgcheck=0
enabled=0

Some files were not shown because too many files have changed in this diff Show More