# Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # # Copyright (C) 2019 Intel Corporation # FROM centos:7.8.2003 # Proxy configuration #ENV http_proxy "http://your.actual_http_proxy.com:your_port" #ENV https_proxy "https://your.actual_https_proxy.com:your_port" #ENV ftp_proxy "http://your.actual_ftp_proxy.com:your_port" #ENV no_proxy "localhost,127.0.0.1" #RUN echo "proxy=$http_proxy" >> /etc/yum.conf && \ # echo -e "export http_proxy=$http_proxy\nexport https_proxy=$https_proxy\n\ #export ftp_proxy=$ftp_proxy\nexport no_proxy=$no_proxy" >> /root/.bashrc # username you will docker exec into the container as. # It should NOT be your host username so you can easily tell # if you are in our out of the container. ARG MYUNAME=builder ARG MYUID=1000 # CentOS & EPEL URLs that match the base image # Override these with --build-arg if you have a mirror ARG CENTOS_7_8_URL=https://vault.centos.org/centos/7.8.2003 ARG CENTOS_7_9_URL=http://mirror.centos.org/centos-7/7.9.2009 ARG EPEL_7_8_URL=https://archives.fedoraproject.org/pub/archive/epel/7.2020-04-20 ARG MY_EMAIL= ENV container=docker # Lock down centos & epel repos RUN rm -f /etc/yum.repos.d/* COPY toCOPY/yum.repos.d/*.repo /etc/yum.repos.d/ COPY centos-mirror-tools/rpm-gpg-keys/RPM-GPG-KEY-EPEL-7 /etc/pki/rpm-gpg/ RUN rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY* && \ echo "http_caching=packages" >> /etc/yum.conf && \ echo "skip_missing_names_on_install=0" >>/etc/yum.conf && \ # yum variables must be in lower case ; \ echo "$CENTOS_7_8_URL" >/etc/yum/vars/centos_7_8_url && \ echo "$EPEL_7_8_URL" >/etc/yum/vars/epel_7_8_url && \ echo "$CENTOS_7_9_URL" >/etc/yum/vars/centos_7_9_url && \ # disable fastestmirror plugin because we are not using mirrors ; \ # FIXME: use a mirrorlist URL for centos/vault/epel archives. I couldn't find one. sed -i 's/enabled=1/enabled=0/' /etc/yum/pluginconf.d/fastestmirror.conf && \ echo "[main]" >> /etc/yum/pluginconf.d/subscription-manager.conf && \ echo "enabled=0" >> /etc/yum/pluginconf.d/subscription-manager.conf && \ yum clean all && \ yum makecache && \ yum install -y deltarpm # Without this, init won't start the enabled services and exec'ing and starting # them reports "Failed to get D-Bus connection: Operation not permitted". VOLUME /run /tmp # root CA cert expired on October 1st, 2021 RUN yum update -y --enablerepo=centos-7.9-updates ca-certificates # Download required dependencies by mirror/build processes. RUN yum install -y \ anaconda \ anaconda-runtime \ autoconf-archive \ autogen \ automake \ bc \ bind \ bind-utils \ bison \ cpanminus \ createrepo \ createrepo_c \ deltarpm \ docker-client \ expat-devel \ flex \ isomd5sum \ gcc \ gettext \ git \ libguestfs-tools \ libtool \ libxml2 \ lighttpd \ lighttpd-fastcgi \ lighttpd-mod_geoip \ net-tools \ mkisofs \ mongodb \ mongodb-server \ pax \ perl-CPAN \ python-deltarpm \ python-pep8 \ python-pip \ python-psutil \ python2-psutil \ python36-psutil \ python3-devel \ python-sphinx \ python-subunit \ python-virtualenv \ python-yaml \ python2-ruamel-yaml \ postgresql \ qemu-kvm \ quilt \ rpm-build \ rpm-sign \ rpm-python \ squashfs-tools \ sudo \ systemd \ syslinux \ udisks2 \ vim-enhanced \ wget # Finally install a locked down version of mock RUN groupadd -g 751 cgts && \ echo "mock:x:751:root" >> /etc/group && \ echo "mockbuild:x:9001:" >> /etc/group && \ yum install -y \ http://mirror.starlingx.cengn.ca/mirror/centos/epel/dl.fedoraproject.org/pub/epel/7/x86_64/Packages/m/mock-1.4.16-1.el7.noarch.rpm \ http://mirror.starlingx.cengn.ca/mirror/centos/epel/dl.fedoraproject.org/pub/epel/7/x86_64/Packages/m/mock-core-configs-31.6-1.el7.noarch.rpm # mock custumizations # forcing chroots since a couple of packages naughtily insist on network access and # we dont have nspawn and networks happy together. RUN useradd -s /sbin/nologin -u 9001 -g 9001 mockbuild && \ rmdir /var/lib/mock && \ ln -s /localdisk/loadbuild/mock /var/lib/mock && \ rmdir /var/cache/mock && \ ln -s /localdisk/loadbuild/mock-cache /var/cache/mock && \ echo "config_opts['use_nspawn'] = False" >> /etc/mock/site-defaults.cfg && \ echo "config_opts['rpmbuild_networking'] = True" >> /etc/mock/site-defaults.cfg && \ echo >> /etc/mock/site-defaults.cfg # cpan modules, installing with cpanminus to avoid stupid questions since cpan is whack RUN cpanm --notest Fatal && \ cpanm --notest XML::SAX && \ cpanm --notest XML::SAX::Expat && \ cpanm --notest XML::Parser && \ cpanm --notest XML::Simple # Install repo tool RUN curl https://storage.googleapis.com/git-repo-downloads/repo > /usr/local/bin/repo && \ chmod a+x /usr/local/bin/repo # installing go and setting paths ENV GOPATH="/usr/local/go" ENV PATH="${GOPATH}/bin:${PATH}" RUN yum install -y golang && \ mkdir -p ${GOPATH}/bin && \ curl https://raw.githubusercontent.com/golang/dep/master/install.sh | sh # Uprev git, repo RUN yum install -y dh-autoreconf curl-devel expat-devel gettext-devel openssl-devel perl-devel zlib-devel asciidoc xmlto docbook2X && \ cd /tmp && \ wget https://github.com/git/git/archive/v2.29.2.tar.gz -O git-2.29.2.tar.gz && \ tar xzvf git-2.29.2.tar.gz && \ cd git-2.29.2 && \ make configure && \ ./configure --prefix=/usr/local && \ make all doc && \ make install install-doc && \ cd /tmp && \ rm -rf git-2.29.2.tar.gz git-2.29.2 # Systemd Enablement RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in *; do [ $i == systemd-tmpfiles-setup.service ] || rm -f $i; done); \ rm -f /lib/systemd/system/multi-user.target.wants/*;\ rm -f /etc/systemd/system/*.wants/*;\ rm -f /lib/systemd/system/local-fs.target.wants/*; \ rm -f /lib/systemd/system/sockets.target.wants/*udev*; \ rm -f /lib/systemd/system/sockets.target.wants/*initctl*; \ rm -f /lib/systemd/system/basic.target.wants/*;\ rm -f /lib/systemd/system/anaconda.target.wants/* # pip installs COPY toCOPY/builder-constraints.txt /home/$MYUNAME/ # Install required python modules globally; versions are in the constraints file. # Be careful not to replace modules provided by RPMs as it may break # other system packages. Look for warnings similar to "Uninstalling a # distutils installed project has been deprecated" from pip. RUN pip install -c /home/$MYUNAME/builder-constraints.txt \ testrepository \ fixtures \ pbr \ git-review \ python-subunit \ junitxml \ testtools # Create a sane py27 virtualenv COPY toCOPY/builder-opt-py27-constraints.txt /home/$MYUNAME RUN virtualenv /opt/py27 && \ source /opt/py27/bin/activate && \ pip install -c /home/$MYUNAME/builder-opt-py27-constraints.txt \ tox \ && \ for prog in tox ; do \ ln -s /opt/py27/bin/$prog /usr/bin ; \ done # Inherited tools for mock stuff # we at least need the mock_cache_unlock tool # they install into /usr/bin COPY toCOPY/mock_overlay /opt/mock_overlay RUN cd /opt/mock_overlay && \ make && \ make install # This image requires a set of scripts and helpers # for working correctly, in this section they are # copied inside the image. COPY toCOPY/finishSetup.sh /usr/local/bin COPY toCOPY/populate_downloads.sh /usr/local/bin COPY toCOPY/generate-local-repo.sh /usr/local/bin COPY toCOPY/generate-centos-repo.sh /usr/local/bin COPY toCOPY/lst_utils.sh /usr/local/bin COPY toCOPY/.inputrc /home/$MYUNAME/ # Thes are included for backward compatibility, and # should be removed after a reasonable time. COPY toCOPY/generate-cgcs-tis-repo /usr/local/bin COPY toCOPY/generate-cgcs-centos-repo.sh /usr/local/bin # ENV setup RUN echo "# Load stx-builder configuration" >> /etc/profile.d/stx-builder-conf.sh && \ echo "if [[ -r \${HOME}/buildrc ]]; then" >> /etc/profile.d/stx-builder-conf.sh && \ echo " source \${HOME}/buildrc" >> /etc/profile.d/stx-builder-conf.sh && \ echo " export PROJECT SRC_BUILD_ENVIRONMENT MYPROJECTNAME MYUNAME" >> /etc/profile.d/stx-builder-conf.sh && \ echo " export MY_BUILD_CFG MY_BUILD_CFG_RT MY_BUILD_CFG_STD MY_BUILD_DIR MY_BUILD_ENVIRONMENT MY_BUILD_ENVIRONMENT_FILE MY_BUILD_ENVIRONMENT_FILE_RT MY_BUILD_ENVIRONMENT_FILE_STD MY_DEBUG_BUILD_CFG_RT MY_DEBUG_BUILD_CFG_STD MY_LOCAL_DISK MY_MOCK_ROOT MY_REPO MY_REPO_ROOT_DIR MY_SRC_RPM_BUILD_DIR MY_RELEASE MY_WORKSPACE LAYER" >> /etc/profile.d/stx-builder-conf.sh && \ echo "fi" >> /etc/profile.d/stx-builder-conf.sh && \ echo "export FORMAL_BUILD=0" >> /etc/profile.d/stx-builder-conf.sh && \ echo "export PATH=\$MY_REPO/build-tools:\$PATH" >> /etc/profile.d/stx-builder-conf.sh # centos locales are broken. this needs to be run after the last yum install/update RUN localedef -i en_US -f UTF-8 en_US.UTF-8 # setup RUN mkdir -p /www/run && \ mkdir -p /www/logs && \ mkdir -p /www/home && \ mkdir -p /www/root/htdocs/localdisk && \ chown -R $MYUID:cgts /www && \ ln -s /localdisk/loadbuild /www/root/htdocs/localdisk/loadbuild && \ ln -s /import/mirrors/CentOS /www/root/htdocs/CentOS && \ ln -s /import/mirrors/fedora /www/root/htdocs/fedora && \ ln -s /localdisk/designer /www/root/htdocs/localdisk/designer # lighthttpd setup # chmod for /var/log/lighttpd fixes a centos issue # in place sed for server root since it's expanded soon thereafter # echo "server.bind = \"localhost\"" >> /etc/lighttpd/lighttpd.conf && \ RUN echo "$MYUNAME ALL=(ALL:ALL) NOPASSWD:ALL" >> /etc/sudoers && \ mkdir -p /var/log/lighttpd && \ chmod a+rwx /var/log/lighttpd/ && \ sed -i 's%^var\.log_root.*$%var.log_root = "/www/logs"%g' /etc/lighttpd/lighttpd.conf && \ sed -i 's%^var\.server_root.*$%var.server_root = "/www/root"%g' /etc/lighttpd/lighttpd.conf && \ sed -i 's%^var\.home_dir.*$%var.home_dir = "/www/home"%g' /etc/lighttpd/lighttpd.conf && \ sed -i 's%^var\.state_dir.*$%var.state_dir = "/www/run"%g' /etc/lighttpd/lighttpd.conf && \ sed -i "s/server.port/#server.port/g" /etc/lighttpd/lighttpd.conf && \ sed -i "s/server.use-ipv6/#server.use-ipv6/g" /etc/lighttpd/lighttpd.conf && \ sed -i "s/server.username/#server.username/g" /etc/lighttpd/lighttpd.conf && \ sed -i "s/server.groupname/#server.groupname/g" /etc/lighttpd/lighttpd.conf && \ sed -i "s/server.bind/#server.bind/g" /etc/lighttpd/lighttpd.conf && \ sed -i "s/server.document-root/#server.document-root/g" /etc/lighttpd/lighttpd.conf && \ sed -i "s/server.dirlisting/#server.dirlisting/g" /etc/lighttpd/lighttpd.conf && \ echo "server.port = 8088" >> /etc/lighttpd/lighttpd.conf && \ echo "server.use-ipv6 = \"disable\"" >> /etc/lighttpd/lighttpd.conf && \ echo "server.username = \"$MYUNAME\"" >> /etc/lighttpd/lighttpd.conf && \ echo "server.groupname = \"cgts\"" >> /etc/lighttpd/lighttpd.conf && \ echo "server.bind = \"localhost\"" >> /etc/lighttpd/lighttpd.conf && \ echo "server.document-root = \"/www/root/htdocs\"" >> /etc/lighttpd/lighttpd.conf && \ sed -i "s/dir-listing.activate/#dir-listing.activate/g" /etc/lighttpd/conf.d/dirlisting.conf && \ echo "dir-listing.activate = \"enable\"" >> /etc/lighttpd/conf.d/dirlisting.conf RUN useradd -r -u $MYUID -g cgts -m $MYUNAME && \ ln -s /home/$MYUNAME/.ssh /mySSH && \ rsync -av /etc/skel/ /home/$MYUNAME/ # now that we are doing systemd, make the startup script be in bashrc # also we need to SHADOW the udev centric mkefiboot script with a sudo centric one RUN echo "bash -C /usr/local/bin/finishSetup.sh" >> /home/$MYUNAME/.bashrc && \ echo "export PATH=/usr/local/bin:/localdisk/designer/$MYUNAME/bin:\$PATH" >> /home/$MYUNAME/.bashrc && \ chmod a+x /usr/local/bin/* # Genrate a git configuration file in order to save an extra step # for end users, this file is required by "repo" tool. RUN chown $MYUNAME /home/$MYUNAME && \ if [ -z $MY_EMAIL ]; then MY_EMAIL=$MYUNAME@opendev.org; fi && \ runuser -u $MYUNAME -- git config --global user.email $MY_EMAIL && \ runuser -u $MYUNAME -- git config --global user.name $MYUNAME && \ runuser -u $MYUNAME -- git config --global color.ui false # Customizations for mirror creation RUN rm /etc/yum.repos.d/* COPY centos-mirror-tools/yum.repos.d/* /etc/yum.repos.d/ COPY centos-mirror-tools/rpm-gpg-keys/* /etc/pki/rpm-gpg/ # Import GPG keys RUN rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY* # Try to continue a yum command even if a StarlingX repo is unavailable. RUN yum-config-manager --setopt=StarlingX\*.skip_if_unavailable=1 --save # When we run 'init' below, it will run systemd, and systemd requires RTMIN+3 # to exit cleanly. By default, docker stop uses SIGTERM, which systemd ignores. STOPSIGNAL RTMIN+3 # Don't know if it's possible to run services without starting this CMD /usr/sbin/init