Add NTP server monitoring as a collectd plugin

This update disables rmon NTP monitoring which is now done
as a collectd plugin with the following depends update.

Story: 2002823
Task: 22859

Depends-On: https://review.openstack.org/#/c/628685/
Change-Id: I736703542c8a6ba3dd9e9db2d6fb7ccbdc906643
Signed-off-by: Eric MacDonald <eric.macdonald@windriver.com>
This commit is contained in:
Eric MacDonald 2019-01-04 15:37:58 -05:00
parent 64c1d400b9
commit f7031cf5fb
4 changed files with 1 additions and 218 deletions

View File

@ -1,3 +1,3 @@
SRC_DIR="src"
TIS_PATCH_VER=144
TIS_PATCH_VER=145
BUILD_IS_SLOW=5

View File

@ -419,7 +419,6 @@ install -m 644 -p -D %{_buildsubdir}/rmon/scripts/nova_virtual_resource.conf %{b
install -m 644 -p -D %{_buildsubdir}/rmon/scripts/oam_resource.conf %{buildroot}%{_sysconfdir}/rmon_interfaces.d/oam_resource.conf
install -m 644 -p -D %{_buildsubdir}/rmon/scripts/management_resource.conf %{buildroot}%{_sysconfdir}/rmon_interfaces.d/management_resource.conf
install -m 644 -p -D %{_buildsubdir}/rmon/scripts/infrastructure_resource.conf %{buildroot}%{_sysconfdir}/rmon_interfaces.d/infrastructure_resource.conf
install -m 755 -p -D %{_buildsubdir}/rmon/scripts/query_ntp_servers.sh %{buildroot}%{_sysconfdir}/rmonfiles.d/query_ntp_servers.sh
install -m 755 -p -D %{_buildsubdir}/rmon/scripts/rmon_reload_on_cpe.sh %{buildroot}%{local_etc_goenabledd}/rmon_reload_on_cpe.sh
# log rotation
@ -467,7 +466,6 @@ install -m 755 -d %{buildroot}/var/run
%post -n mtce-rmon
/bin/systemctl enable rmon.service
###############################
# Maintenance RPM Files
###############################
@ -588,7 +586,6 @@ install -m 755 -d %{buildroot}/var/run
%{_sysconfdir}/rmon_interfaces.d/management_resource.conf
%{_sysconfdir}/rmon_interfaces.d/oam_resource.conf
%{_sysconfdir}/rmon_interfaces.d/infrastructure_resource.conf
%{_sysconfdir}/rmonfiles.d/query_ntp_servers.sh
%{_libdir}/librmonapi.so.1.0
%{_libdir}/librmonapi.so.1

View File

@ -4818,12 +4818,6 @@ void rmon_service (rmon_ctrl_type * ctrl_ptr)
_postPMs();
}
//We only monitor the NTP servers on the controller node
if ( is_controller() )
{
ntp_audit_handler ();
}
/* loop through all the resource timers waiting for a ring */
for ( int j = 0 ; j < ctrl_ptr->resources ; j++ )
{

View File

@ -1,208 +0,0 @@
#!/bin/bash
#
# Copyright (c) 2015-2018 Wind River Systems, Inc.
#
# SPDX-License-Identifier: Apache-2.0
#
# Return values;
# 0 - All NTP servers are reachable and one is selected
# 1 - No NTP servers are provisioned
# 2 - None of the NTP servers are reachable
# 3 - Some NTP servers reachable and one is selected
# 4 - Some NTP servers reachable but none is selected
#
# This script execute ntpq -np to determined which provisioned servers
# reachable. A server will be considered reachable only when the Tally Code
# is a * or a +. Also the controller node will not be considered a reachable
# server
#
# Here is an example of the ntpq command
# remote refid st t when poll reach delay offset jitter
# ==============================================================================
# +192.168.204.104 206.108.0.133 2 u 203 1024 377 0.226 -3.443 1.137
# +97.107.129.217 200.98.196.212 2 u 904 1024 377 21.677 5.577 0.624
# 192.95.27.155 24.150.203.150 2 u 226 1024 377 15.867 0.381 1.124
# -97.107.129.217 200.98.196.212 2 u 904 1024 377 21.677 5.577 0.624
# *182.95.27.155 24.150.203.150 2 u 226 1024 377 15.867 0.381 1.124
#
# The temporary file /tmp/ntpq_server_info" will look something like this.
# - The first line contains all the external NTP servers configured (it excludes the
# peer controller).
# - The second line lists all the unreachable external NTP servers. It also excludes
# the peer controller.
#
# more /tmp/ntpq_server_info
# 10.10.10.42;10.10.10.43;10.10.10.44;
# 10.10.10.43;
#
# This temporary file is re-created everytime the this script is run. It is used by
# caller of the script to get more detail regarding the NTP servers status.
#
# This script will only be run on the controller nodes.
#
# This script logs to user.log
NTP_OK=0
NTP_NOT_PROVISIONED=1
NTP_NONE_REACHABLE=2
NTP_SOME_REACHABLE=3
NTP_SOME_REACHABLE_NONE_SELECTED=4
# is it the ip address of a controller node
isController ()
{
host=$1
res=$(echo $(grep $host /etc/hosts) | grep controller)
if [[ "$res" != "" ]] ; then
logger -p info -t $0 "$host is a controller"
return 1
else
return 0
fi
}
# loop through all the ntpq servers listed as IPs and get the controller's
getControllerIP ()
{
servers=$1
# loop through all the ntpq servers
while read line
do
server=$(echo $line | awk '{print $1;}')
if [[ "$line" != " "* ]] ; then
# if the first char is not a space then remove it e.g +159.203.31.244
server=$(echo $server| cut -c 2-)
fi
res=$(echo $(grep $server /etc/hosts) | grep controller)
if [[ "$res" != "" ]] ; then
echo $server
return
fi
done < <(echo "$servers")
# should of found the controller exit script
logger -p err -t $0 "Could not find the Controller's IP address"
exit -1
}
# set up ouput file
ntpq_server_info="/tmp/ntpq_server_info"
rm -f $ntpq_server_info
# find out if there is any servers provisioned
server_count=$(cat /etc/ntp.conf | awk '{print $1;}' | grep -c '^server')
bad_server_count=0
# exit if there is no servers provisioned
if [ $server_count -eq 0 ]; then
logger -p info -t $0 "No NTP servers are provisioned (1)"
exit $NTP_NOT_PROVISIONED
fi
# query the ntp servers with ntpq
ntpres="$(ntpq -pn)"
echo -e "\n Results from 'ntpq -pn' command \n $ntpres \n" | logger -p info -t $0
# keep for debugging
# the first argument is a filename and used instead of using ntpq
#if [ "$1" ]; then
# ntpres=$(cat $1)
#fi
# keep for debugging hard code the filname istead of passing it as an argument
#ntpres=$(cat "/home/wrsroot/test")
#server_count=3
#
# remove the header lines
server_list=$( echo "$ntpres" | tail -n +3 )
# loop through and find non reachable servers
# a server is reachable with its prepended with a "*" or a "+"
SAVEIFS=$IFS
IFS=''
# list all provisioned servers and save the external ones in temp file
while read line
do
server=$(echo $line | awk '{print $1;}')
if [[ "$line" != " "* ]] ; then
# if the first char is not a space then remove it e.g +159.203.31.244
server=$(echo $server| cut -c 2-)
fi
# add provisioned ntp server to temp file if not the controller
isController $server
if [[ "$?" == 0 ]]; then
echo -n $server";" >> $ntpq_server_info
fi
done < <(echo "$server_list")
echo >> $ntpq_server_info
# remove the peer server (peer controller) from the server list
controller_host_ip=$(getControllerIP $server_list)
server_list=$(echo $server_list | grep -v $controller_host_ip)
# list all non reachable ntp servers and save in temp file
while read line
do
if [[ "$line" != "*"* ]] && [[ "$line" != "+"* ]] ;then
server=$(echo $line | awk '{print $1;}')
if [[ "$line" != " "* ]] ; then
# if the first char is not a space then remove it e.g +159.203.31.244
server=$(echo $server| cut -c 2-)
fi
# add the non reachable external ntp servers to temp file
((bad_server_count++))
echo -n $server";" >> $ntpq_server_info
fi
done < <(echo "$server_list")
IFS=$SAVEIFS
#
logger -p info -t $0 Total number of provisioned servers $server_count
logger -p info -t $0 Total number of unreachable servers $bad_server_count
#
# check if there is a "*" which represent a selected server
# there should be only one but handling multiple
selected=$(echo "$server_list" | grep -c '^*')
if [ "$bad_server_count" -eq 0 ];then
if [ $selected -eq 0 ]; then
logger -p info -t $0 "All external NTP servers are reachable but none is selected (4)"
exit $NTP_SOME_REACHABLE_NONE_SELECTED
else
logger -p info -t $0 "All external NTP servers are reachable and one is selected (0)"
exit $NTP_OK
fi
fi
# it does not matter if the peer controller is the server selected, if all the
# external NTP servers are not reachable then we return NTP_NONE_REACHABLE
if [ "$bad_server_count" -eq "$server_count" ];then
logger -p info -t $0 "None of the external NTP servers are reachable (2)"
exit $NTP_NONE_REACHABLE
fi
if [ "$bad_server_count" -lt "$server_count" ];then
if [ $selected -eq 0 ]; then
# this will happen if the peer controller is the selected server
logger -p info -t $0 "Some external NTP servers are reachable but none is selected (4)"
exit $NTP_SOME_REACHABLE_NONE_SELECTED
else
logger -p info -t $0 "Some external NTP servers are not reachable and one selected (3)"
exit $NTP_SOME_REACHABLE
fi
fi
logger -p err -t $0 "Should not exit here"
exit -1