config/sysinv/sysinv
Lucas Ratusznei Fonseca ff3a5d2341 Update network interface puppet resource gen to support dual-stack
This change updates the puppet resource generation logic for network
interfaces to suport dual-stack.

Change summary
==============

- Aliases / labels
    Previously, each alias was associated to a specific network. Now,
    since more than one address can be associated to the same network,
    the aliases are also associated to addresses. The label name is
    now :<network_id>-<address_id>. The network_id is 0 if there's no
    network associated with the alias, that's the case for the base
    interface config or for the cases where the address is not
    associated to a network. The address_id is 0 if there's no address
    associated with the alias, which is the case for the base config
    and for when there's no static address associated to the network,
    i.e. the method is DHCP.

- Static addresses
    Previously, interfaces with more than one static addresses not
    associated with pools would be assigned just the first one. Now,
    an alias config is generated for each address.

- CentOS compatibility
    All the code related to CentOS was removed.

- Duplex-direct mode
    Duplex-direct systems must have DAD disabled for management and
    cluster-host interfaces. The disable DAD command is now generated
    only in the base interface config for all types of interfaces.

- Address pool names
    The change assumes a new standard for address pool names, they will
    be formed by the old names with the suffixes '-ipv4' or '-ipv6'.
    For example: management-ipv4, management-ipv6. Since other systems
    that rely on the previous standard are not yet upgraded to
    dual-stack, the constant DUAL_STACK_COMPATIBILITY_MODE was
    introduced to control resource generation and validation logic in a
    way that assures compatibility. The constant and the conditionals
    will be removed once the other modules are updated. The
    conditionals were implemented more as a way to highlight which
    parts of the code are affected and make the changes easier in the
    future.

- Tests / DB Base
    The base class for tests was updated to generate more consistent
    database states. Mixins for dual-stack cases were also created.

- Tests / Interface
    Most of the test functions in the class InterfaceTestCase caused
    unnecessary updates to the database and the context. The class
    was splitted in two, the first one containing the tests that only
    need the basic database setup (controller, one interface
    associated with the mgmt network), and the other one for the tests
    that need different setups.
    A new fixture was created to test multiple system configs (IPv4,
    IPv6, dual-stack), which inspects in detail the generated
    hieradata. The tests associated with the InterfaceHostV6TestCase
    were moved to the new fixture, and new ones were introduced.

Test plan
=========

Online setup tests
------------------

System: STANDARD (2 Controllers, 2 Storages, 1 Worker)

Stack setups:
  - Single stack IPv4
  - Single stack IPv6
  - Dual stack, primary IPv4
  - Dual stack, primary IPv6

[PASS] TC1 - Online setup, regular ethernet
    mgmt0 (Ethernet) -> PXEBOOT, MGMT, CLUSTER_HOST

[PASS] TC2 - Online setup, VLAN over ethernet
    pxe0 (Ethernet) -> PXEBOOT
    mgmt0 (VLAN over pxe0) -> MGMT, CLUSTER_HOST

[PASS] TC3 - Online setup, bondig
    mgmt0 (Bond) -> PXEBOOT, MGMT, CLUSTER_HOST

[PASS] TC4 - Online setup, VLAN over bonding
    pxe0 (Bond) -> PXEBOOT
    mgmt0 (VLAN over pxe0) -> MGMT, CLUSTER_HOST

Installation tests
------------------

Systems:
  - AIO-SX
  - AIO-DX
  - Standard (2 Controllers, 2 Storages, 1 Worker)

[PASS] TC5 - Regular installation on VirtualBox, IPv4

[PASS] TC6 - Regular installation on VirtualBox, IPv6

Data interface tests
--------------------

System: AIO-DX

Setup:
    data0 -> Ethernet, ipv4_mode=static, ipv6_mode=static
    data1 -> VLAN on top of data0, ipv4_mode=static, ipv6_mode=static

For both interfaces, the following was performed:

[PASS] TC7 - Add static IPv4 address
[PASS] TC8 - Add static IPv6 address
[PASS] TC9 - Add IPv4 route
[PASS] TC10 - Add IPv6 route
[PASS] TC11 - Remove IPv4 route
[PASS] TC12 - Remove IPv6 route
[PASS] TC13 - Remove static IPv4 address
[PASS] TC14 - Remove static IPv6 address

Story: 2011027
Task: 49815
Change-Id: Ib9603cbd444b21aefbcd417780a12c079f3d0b0f
Signed-off-by: Lucas Ratusznei Fonseca <lucas.ratuszneifonseca@windriver.com>
2024-04-16 16:23:15 -03:00
..
centos Merge sysinv_fpga_agent with sysinv_agent 2022-10-03 14:12:28 -04:00
debian Add IPsec certificates renewal cron job 2024-03-13 10:46:24 -04:00
opensuse Merge sysinv_fpga_agent with sysinv_agent 2022-10-03 14:12:28 -04:00
sysinv Update network interface puppet resource gen to support dual-stack 2024-04-16 16:23:15 -03:00
.gitignore StarlingX open source release updates 2018-05-31 07:35:52 -07:00
PKG-INFO StarlingX open source release updates 2018-05-31 07:35:52 -07:00