Merge "Add documentation of Deploy FlexRAN 21.11 on StarlingX"
This commit is contained in:
Zuul
Gerrit Code Review
commit
0b803bfad1
|
|
@ -1,8 +1,8 @@
|
|||
.. _deploy-flexran-on-starlingx-c4efa00b1b98:
|
||||
.. _deploy-flexran-2107-on-starlingx-c4efa00b1b98:
|
||||
|
||||
===========================
|
||||
Deploy FlexRAN on StarlingX
|
||||
===========================
|
||||
=================================
|
||||
Deploy FlexRAN 21.07 on StarlingX
|
||||
=================================
|
||||
|
||||
.. contents::
|
||||
:local:
|
||||
|
|
@ -74,15 +74,15 @@ following hardware for FlexRAN applications.
|
|||
+---------------------------+--------------------------------------------------------------------------------+
|
||||
| Minimum network ports | OAM: 1x1GE, If only test timer mode, no other NIC required. |
|
||||
+---------------------------+--------------------------------------------------------------------------------+
|
||||
| BIOS settings | - Hyper-Threading technology: enabled; |
|
||||
| | - Virtualization technology: enabled; |
|
||||
| | - VT for directed I/O: enabled; |
|
||||
| | - CPU power and performance policy set to performance; |
|
||||
| | - CPU C state control: enabled; |
|
||||
| | - Plug & play BMC detection: disabled; |
|
||||
| | - Uncore Frequency Scaling : Disabled; |
|
||||
| | - Performance P-limit : Disabled; |
|
||||
| | - Enhanced Intel SpeedStep (R) Tech : Enabled; |
|
||||
| BIOS settings | - Hyper-Threading technology : Enabled |
|
||||
| | - Virtualization technology : Enabled |
|
||||
| | - VT for directed I/O : Enabled |
|
||||
| | - CPU Power and Performance Policy : Performance |
|
||||
| | - CPU C state control : Enabled |
|
||||
| | - Plug & play BMC detection : Disabled |
|
||||
| | - Uncore Frequency Scaling : Disabled |
|
||||
| | - Performance P-limit : Disabled |
|
||||
| | - Enhanced Intel SpeedStep (R) Tech : Enabled |
|
||||
| | - Intel(R) Turbo Boost Technology : Enabled |
|
||||
+---------------------------+--------------------------------------------------------------------------------+
|
||||
| Accelerator Card | Mt. Bryce ACC100 (Intel eASIC chip which can be mounted on third party card) |
|
||||
|
|
@ -344,7 +344,7 @@ The following steps provide a quick-start procedure for developers.
|
|||
flxr_install_dir=/opt/flexran/
|
||||
|
||||
# populate flexran related env var
|
||||
cd ${lxr_install_dir}
|
||||
cd ${flxr_install_dir}
|
||||
source set_env_var.sh -d
|
||||
|
||||
# prepare the FlexRAN binaries
|
||||
|
|
@ -563,14 +563,14 @@ Build FlexRAN in Pod
|
|||
.. code:: bash
|
||||
|
||||
mkdir -p /opt/scrach && cd /opt/scrach
|
||||
scp <options> flexran-21.07.tar.gz.part00 .
|
||||
scp <options> flexran-21.07.tar.gz.part01 .
|
||||
scp <options> FlexRAN-21.07.tar.gz.part00 .
|
||||
scp <options> FlexRAN-21.07.tar.gz.part01 .
|
||||
scp <options> dpdk_21.07.patch .
|
||||
scp <options> system_studio_2019_update_5_ultimate_edition.tar.gz .
|
||||
|
||||
cat flexran-21.07.tar.gz.part00 flexran-21.07.tar.gz.part01 > flexran-21.07.tar.gz
|
||||
rm flexran-21.07.tar.gz.part00
|
||||
rm flexran-21.07.tar.gz.part01
|
||||
cat FlexRAN-21.07.tar.gz.part00 FlexRAN-21.07.tar.gz.part01 > FlexRAN-21.07.tar.gz
|
||||
rm FlexRAN-21.07.tar.gz.part00
|
||||
rm FlexRAN-21.07.tar.gz.part01
|
||||
|
||||
#. Copy |DPDK| source code into the pod's |PVC|:
|
||||
|
||||
|
|
@ -0,0 +1,915 @@
|
|||
.. _deploy-flexran-2111-on-starlingx-ca139fa4e285:
|
||||
|
||||
=================================
|
||||
Deploy FlexRAN 21.11 on StarlingX
|
||||
=================================
|
||||
|
||||
.. contents::
|
||||
:local:
|
||||
:depth: 1
|
||||
|
||||
-----
|
||||
Scope
|
||||
-----
|
||||
|
||||
`FlexRAN <https://www.intel.com/content/www/us/en/developer/topic-technology/edge-5g/tools/flexran.html>`__
|
||||
is a vRAN reference implementation for virtualized cloud-enabled radio access
|
||||
networks. FlexRAN is not an open-source project. It is provided here as an
|
||||
example of a 5G application running on |prod|.
|
||||
|
||||
This document provides details on how to build FlexRAN software for |prod|,
|
||||
generate a containerized version of the prebuilt FlexRAN binaries, and deploy
|
||||
on |prod| solution.
|
||||
|
||||
.. note::
|
||||
|
||||
The steps in this guide are based on FlexRAN 21.11. The instructions are
|
||||
subject to change in future releases of FlexRAN.
|
||||
|
||||
-----------------
|
||||
Intended Audience
|
||||
-----------------
|
||||
|
||||
The intended audience for this document are software engineers and
|
||||
system architects who want to design and develop 5G systems using the
|
||||
O-RAN Specifications based on FlexRAN and |prod| OpenSource Edge
|
||||
computing platform.
|
||||
|
||||
------------------------
|
||||
AIO Simplex Installation
|
||||
------------------------
|
||||
|
||||
*************************************************
|
||||
Prepare USB stick with StarlingX Installation ISO
|
||||
*************************************************
|
||||
|
||||
#. Get StarlingX Installation ISO from following location:
|
||||
|
||||
http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/latest_build/outputs/iso/bootimage.iso
|
||||
|
||||
#. Burn the image to a USB stick:
|
||||
|
||||
.. note::
|
||||
|
||||
Be sure to use the correct USB device name when copying the image.
|
||||
|
||||
.. code::
|
||||
|
||||
dd if=bootimage.iso of=/dev/sdc bs=1M
|
||||
|
||||
*****************************
|
||||
Follow the installation guide
|
||||
*****************************
|
||||
|
||||
|
||||
In addition to the :ref:`aio_simplex_hardware_r6` for |prod|, you will need the
|
||||
following hardware for FlexRAN applications.
|
||||
|
||||
+---------------------------+--------------------------------------------------------------------------------+
|
||||
| Minimum Requirement | All-in-one Controller Node |
|
||||
+===========================+================================================================================+
|
||||
| Minimum processor class | Single-CPU Intel Xeon Cascade Lake (14 nm) or IceLake (10 nm) |
|
||||
+---------------------------+--------------------------------------------------------------------------------+
|
||||
| Minimum memory | 64 GB single socket |
|
||||
+---------------------------+--------------------------------------------------------------------------------+
|
||||
| Minimum network ports | OAM: 1x1GE, If only test timer mode, no other NIC required. |
|
||||
+---------------------------+--------------------------------------------------------------------------------+
|
||||
| BIOS settings | - Hyper-Threading technology: Enabled |
|
||||
| | - Virtualization technology: Enabled |
|
||||
| | - VT for directed I/O: Enabled |
|
||||
| | - CPU Power and Performance Policy: Performance |
|
||||
| | - CPU C state control: Enabled |
|
||||
| | - Plug & play BMC detection: Disabled |
|
||||
| | - Uncore Frequency Scaling: Disabled |
|
||||
| | - Performance P-limit: Disabled |
|
||||
| | - Enhanced Intel SpeedStep (R) Tech: Enabled |
|
||||
| | - Intel(R) Turbo Boost Technology: Enabled |
|
||||
| | - Processor C6: Enabled |
|
||||
| | - Package C-State: C0/C1 |
|
||||
| | - Hardware P-states: Disabled |
|
||||
| | - Memory Configuration: 8-way interleave |
|
||||
| | - AVX License Pre-Grant: Enabled |
|
||||
| | - AVX ICCP Pre-Grant Level: AVX-512 Heavy |
|
||||
+---------------------------+--------------------------------------------------------------------------------+
|
||||
| Accelerator Card | Mt. Bryce ACC100 (Intel eASIC chip which can be mounted on third party card) |
|
||||
+---------------------------+--------------------------------------------------------------------------------+
|
||||
|
||||
The FlexRAN application on |prod| has been tested on Intel Reference Hardware
|
||||
platform: **Coyote Pass** (housing ICX-SP).
|
||||
|
||||
.. note::
|
||||
|
||||
Some third-party platforms like SuperMicro / HPE / Dell / Quanta /
|
||||
and others can also be used depending on customer platform requirements,
|
||||
certain optimizations for low-latency and power savings mode by the
|
||||
platform vendors.
|
||||
|
||||
:ref:`aio_simplex_install_kubernetes_r6`:
|
||||
|
||||
#. In addition to required |prod| configuration, you must set up the Ceph
|
||||
backend for Kubernetes |PVC|, isolcpus and hugepages:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
source /etc/platform/openrc
|
||||
|
||||
NODE=controller-0
|
||||
OAM_IF=<OAM-PORT>
|
||||
|
||||
# if you use flat oam network
|
||||
system host-if-modify ${NODE} $OAM_IF -c platform
|
||||
system interface-network-assign ${NODE} $OAM_IF oam
|
||||
|
||||
# if you use vlan oam network
|
||||
VLANID=<VLAN-ID>
|
||||
system host-if-modify -n pltif -c platform $NODE $OAM_IF
|
||||
system host-if-add ${NODE} -V $VLANID -c platform oam0 vlan pltif
|
||||
system interface-network-assign ${NODE} oam0 oam
|
||||
|
||||
system host-label-assign $NODE sriovdp=enabled
|
||||
system host-label-assign $NODE kube-topology-mgr-policy=restricted
|
||||
|
||||
# Ceph backend for k8s pvc
|
||||
system storage-backend-add ceph --confirmed
|
||||
system host-disk-list ${NODE} | awk '/\/dev\/sdb/{print $2}' | xargs -i system host-stor-add ${NODE} {}
|
||||
|
||||
# isolate cpus depends on number of the physical core
|
||||
system host-cpu-modify -f application-isolated -p0 28 controller-0
|
||||
|
||||
# allocate/enable hugepages for DPDK usage
|
||||
system host-memory-modify $NODE -1G 10 0
|
||||
|
||||
system host-unlock $NODE
|
||||
|
||||
#. After the system has been unlocked and available for the first time,
|
||||
configure ACC100 / Mount Bryce:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
source /etc/platform/openrc
|
||||
|
||||
system host-lock $NODE
|
||||
|
||||
# get the device name of the Mount Bryce, we assume it is
|
||||
# pci_0000_85_00_0 here.
|
||||
system host-device-list controller-0
|
||||
|
||||
# Modify the Mount Bryce device to enable it, specify the base driver
|
||||
# and vf driver, and configure it for 1 VFs
|
||||
|
||||
# NOTE: If this is the initial install and have not unlocked, you will
|
||||
# get following error message.
|
||||
# Cannot configure device 73b13ddf-99be-44c8-8fbe-db85eb8d99ba until host
|
||||
# controller-0 is unlocked for the first time.
|
||||
system host-device-modify controller-0 pci_0000_85_00_0 -e true --driver igb_uio --vf-driver vfio -N 1
|
||||
|
||||
system host-unlock $NODE
|
||||
|
||||
------------------------------
|
||||
FlexRAN Software Prerequisites
|
||||
------------------------------
|
||||
|
||||
* FlexRAN 21.11 Release Package
|
||||
|
||||
FlexRAN Software Wireless Access Solutions is available from the following page:
|
||||
https://www.intel.com/content/www/us/en/developer/topic-technology/edge-5g/tools/flexran.html
|
||||
|
||||
* FlexRAN |DPDK| BBDEV v21.11 Patch
|
||||
|
||||
This patch file is also available in FlexRAN Software Wireless Access
|
||||
Solutions mentioned above.
|
||||
|
||||
* |DPDK| version 20.11.3
|
||||
|
||||
|DPDK| version 20.11.3 is available in http://static.dpdk.org/rel/dpdk-20.11.3.tar.xz
|
||||
|
||||
* Intel oneAPI Compiler
|
||||
|
||||
The Intel oneAPI Compiler is used to compile Intel |DPDK| and L1 software. The
|
||||
Intel oneAPI Compiler can be obtained using the following link:
|
||||
https://www.intel.com/content/www/us/en/developer/tools/oneapi/base-toolkit-download.html
|
||||
|
||||
-----------------------------
|
||||
Build, Deploy and Run FlexRAN
|
||||
-----------------------------
|
||||
|
||||
Generally speaking, the build and execution environments should not be the same.
|
||||
To facilitate building, deploying, and running the process on |prod|, a
|
||||
custom containerized build environment has been prepared and verified. Developers
|
||||
can use the instructions to build the customized Docker image themselves or use
|
||||
the prebuilt Docker image directly.
|
||||
|
||||
Using this method, developers can:
|
||||
|
||||
#. Start the build soon after |prod| is ready.
|
||||
#. Use the scripts provided to generate a Docker image with pre-built
|
||||
FlexRAN binaries.
|
||||
#. Launch the FlexRAN Pod using the image just generated.
|
||||
#. Execute L1 test cases.
|
||||
|
||||
The following procedures provide detailed instructions for completing the stages
|
||||
described above.
|
||||
|
||||
*************************
|
||||
FlexRAN build preparation
|
||||
*************************
|
||||
|
||||
For details, see:
|
||||
|
||||
https://www.intel.com/content/www/us/en/developer/topic-technology/edge-5g/tools/flexran.html
|
||||
|
||||
You can find build instructions in the Compilation Chapter of :title:`FlexRAN 5GNR Reference Solution 21.11`.
|
||||
|
||||
The following steps provide a quick-start procedure for developers.
|
||||
|
||||
#. Create a |PVC| for FlexRAN build storage:
|
||||
|
||||
.. note::
|
||||
|
||||
The |PVC| size should be larger than 70G.
|
||||
|
||||
.. code:: bash
|
||||
|
||||
cat > volume-ceph.yaml << 'EOF'
|
||||
kind: PersistentVolumeClaim
|
||||
apiVersion: v1
|
||||
metadata:
|
||||
name: flexran-storage
|
||||
spec:
|
||||
accessModes:
|
||||
- ReadWriteOnce
|
||||
resources:
|
||||
requests:
|
||||
storage: 80Gi
|
||||
storageClassName: general
|
||||
EOF
|
||||
|
||||
kubectl create -f volume-ceph.yaml
|
||||
|
||||
kubectl create -f volume-ceph.yaml
|
||||
persistentvolumeclaim/flexran-storage created
|
||||
controller-0:~$ kubectl get pvc
|
||||
NAME STATUS VOLUME CAPACITY ACCESS MODES STORAGECLASS AGE
|
||||
flexran-storage Bound pvc-43e50806-785f-440b-8ed2-85bb3c9e8f79 80Gi RWO general 9s
|
||||
|
||||
#. Launch the `quick start building Pod <https://hub.docker.com/r/wrsnfv/flexran-builder>`__
|
||||
attaching to the |PVC|:
|
||||
|
||||
.. note::
|
||||
|
||||
This pod is assumed to be assigned enough resources to launch quickly
|
||||
after FlexRAN is built. If you don't have isolated CPU, hugepage and
|
||||
accelerator resources configured as part of the system used for
|
||||
building, feel free to remove related content from the yaml spec
|
||||
file. Hugepages-1Gi and intel.com/intel_acc100_fec are not required to
|
||||
perform the build.
|
||||
|
||||
.. code:: bash
|
||||
|
||||
cat > flexran-buildpod.yml << 'EOF'
|
||||
apiVersion: v1
|
||||
kind: Pod
|
||||
metadata:
|
||||
name: buildpod
|
||||
annotations:
|
||||
spec:
|
||||
restartPolicy: Never
|
||||
containers:
|
||||
- name: buildpod
|
||||
image: wrsnfv/flexran-builder:21.11
|
||||
imagePullPolicy: IfNotPresent
|
||||
volumeMounts:
|
||||
- name: usrsrc
|
||||
mountPath: /usr/src
|
||||
- mountPath: /hugepages
|
||||
name: hugepage
|
||||
- name: lib-modules
|
||||
mountPath: /lib/modules
|
||||
- name: pvc1
|
||||
mountPath: /opt/fb
|
||||
- name: docker-sock-volume
|
||||
mountPath: /var/run/docker.sock
|
||||
command: ["/bin/bash", "-ec", "sleep infinity"]
|
||||
securityContext:
|
||||
privileged: true
|
||||
capabilities:
|
||||
add:
|
||||
["IPC_LOCK", "SYS_ADMIN"]
|
||||
resources:
|
||||
requests:
|
||||
memory: 32Gi
|
||||
hugepages-1Gi: 10Gi
|
||||
intel.com/intel_acc100_fec: '1'
|
||||
limits:
|
||||
memory: 32Gi
|
||||
intel.com/intel_acc100_fec: '1'
|
||||
hugepages-1Gi: 10Gi
|
||||
volumes:
|
||||
- name: usrsrc
|
||||
hostPath:
|
||||
path: /usr/src
|
||||
- name: lib-modules
|
||||
hostPath:
|
||||
path: /lib/modules
|
||||
- name: hugepage
|
||||
emptyDir:
|
||||
medium: HugePages
|
||||
- name: docker-sock-volume
|
||||
hostPath:
|
||||
path: /var/run/docker.sock
|
||||
type: Socket
|
||||
- name: pvc1
|
||||
persistentVolumeClaim:
|
||||
claimName: flexran-storage
|
||||
EOF
|
||||
|
||||
kubectl create -f flexran-buildpod.yml
|
||||
|
||||
#. (Optional) Instructions for FlexRAN building image creation:
|
||||
|
||||
.. note::
|
||||
|
||||
You can use the following instructions to build the default image or a
|
||||
customized version to meet your needs.
|
||||
|
||||
.. code:: bash
|
||||
|
||||
mkdir dockerbuilder && cd dockerbuilder
|
||||
|
||||
# prepare the artifacts used for FlexRAN prebuilt binary Docker image
|
||||
mkdir docker-image-building
|
||||
cat > docker-image-building/readme << 'EOF'
|
||||
# Instructions of Docker image generation
|
||||
|
||||
# Following steps are supposed to be executed inside building Pod,
|
||||
# after building FlexRAN from source code
|
||||
|
||||
flxr_install_dir=/opt/fb/flexran/
|
||||
|
||||
# populate flexran related env var
|
||||
cd ${flxr_install_dir}
|
||||
source set_env_var.sh -d
|
||||
|
||||
# prepare the FlexRAN binaries
|
||||
./transport.sh
|
||||
|
||||
# build the Docker image
|
||||
docker build -t flr-run -f Dockerfile .
|
||||
|
||||
# tag and push
|
||||
orgname=somename
|
||||
docker tag flr-run ${orgname}/flr-run
|
||||
|
||||
EOF
|
||||
|
||||
cat > docker-image-building/transport.sh << 'EOF'
|
||||
#!/bin/bash
|
||||
|
||||
# ICXPATH=/opt/fb/intel/oneapi/
|
||||
|
||||
echo "Make sure source setvars.sh first.(located in ICX oneapi installation directory)"
|
||||
echo "Make sure source set_env_var.sh -d first.(located in FlexRAN installation directory)"
|
||||
|
||||
[[ -z "$MKLROOT" ]] && { echo "MKLROOT not set, exit..."; exit 1; }
|
||||
[[ -z "$IPPROOT" ]] && { echo "MKLROOT not set, exit..."; exit 1; }
|
||||
[[ -z "$CMPLR_ROOT" ]] && { echo "MKLROOT not set, exit..."; exit 1; }
|
||||
[[ -z "$DIR_WIRELESS_SDK_ROOT" ]] && { echo "DIR_WIRELESS_SDK_ROOT not set, exit..."; exit 1; }
|
||||
|
||||
FLXPATH=`echo $DIR_WIRELESS_SDK_ROOT| awk -F '/sdk' '{print $1}'`
|
||||
|
||||
[[ -d stuff ]] && { echo "Directory stuff exists, move it to old."; mv -f stuff stuff.old; }
|
||||
|
||||
mkdir stuff; cd stuff
|
||||
|
||||
mkdir libs
|
||||
cp -a $MKLROOT/lib/intel64/libmkl_intel_lp64.so* libs
|
||||
cp -a $MKLROOT/lib/intel64/libmkl_core.so* libs
|
||||
cp -a $MKLROOT/lib/intel64/libmkl_intel_thread.so* libs
|
||||
cp -a $MKLROOT/lib/intel64/libmkl_avx512.so.* libs
|
||||
cp -a $MKLROOT/lib/intel64/libmkl_avx2.so* libs
|
||||
cp -a $MKLROOT/lib/intel64/libmkl_avx.so* libs
|
||||
|
||||
cp -a $IPPROOT/lib/intel64/libipps.so* libs
|
||||
cp -a $IPPROOT/lib/intel64/libippe.so* libs
|
||||
cp -a $IPPROOT/lib/intel64/libippcore.so* libs
|
||||
cp -a $IPPROOT/lib/intel64/libippee9.so* libs
|
||||
cp -a $IPPROOT/lib/intel64/libippse9.so* libs
|
||||
|
||||
cp -a $CMPLR_ROOT/linux/compiler/lib/intel64_lin/libiomp5.so* libs
|
||||
cp -a $CMPLR_ROOT/linux/compiler/lib/intel64_lin/libirc.so* libs
|
||||
cp -a $CMPLR_ROOT/linux/compiler/lib/intel64_lin/libimf.so* libs
|
||||
cp -a $CMPLR_ROOT/linux/compiler/lib/intel64_lin/libsvml.so* libs
|
||||
cp -a $CMPLR_ROOT/linux/compiler/lib/intel64_lin/libintlc.so* libs
|
||||
cp -a $CMPLR_ROOT/linux/compiler/lib/intel64_lin/libirng.so* libs
|
||||
|
||||
cp -a $FLXPATH/libs/cpa/bin/libmmwcpadrv.so* libs
|
||||
cp -a $FLXPATH/wls_mod/libwls.so* libs
|
||||
|
||||
mkdir -p flexran/sdk/build-avx512-icx/
|
||||
cp -rf $FLXPATH/sdk/build-avx512-icx/source flexran/sdk/build-avx512-icx/
|
||||
cp -rf $FLXPATH/sdk/build-avx512-icx/install flexran/sdk/build-avx512-icx/
|
||||
cp -rf $FLXPATH/bin flexran/
|
||||
cp -rf $FLXPATH/set_env_var.sh flexran/
|
||||
|
||||
# testcase files
|
||||
mkdir -p tests/nr5g/
|
||||
cd tests/nr5g/
|
||||
for cfg in $FLXPATH/bin/nr5g/gnb/testmac/icelake-sp/*.cfg
|
||||
do
|
||||
cat $cfg | grep TEST_FD > /tmp/$$.testfile
|
||||
while IFS= read line
|
||||
do
|
||||
array=($(echo "$line" | sed 's/5GNR,/ /g'))
|
||||
for i in "${array[@]}"; do
|
||||
if [[ "$i" =~ \.cfg ]]; then
|
||||
casedir=`echo "$i"| cut -d / -f 1-3 | xargs`
|
||||
caseabsdir=$FLXPATH/tests/nr5g/$casedir
|
||||
[[ ! -d $casedir ]] && { mkdir -p $casedir; cp -rf $caseabsdir/* $casedir; }
|
||||
fi
|
||||
done
|
||||
done < /tmp/$$.testfile
|
||||
done
|
||||
|
||||
echo "Transportation Completed."
|
||||
EOF
|
||||
|
||||
chmod a+x docker-image-building/transport.sh
|
||||
|
||||
cat > docker-image-building/set-l1-env.sh << 'EOF'
|
||||
# source this script to l1 binary location
|
||||
|
||||
export WORKSPACE=/root/flexran
|
||||
export isa=avx512
|
||||
|
||||
cd $WORKSPACE
|
||||
source ./set_env_var.sh -i ${isa}
|
||||
|
||||
MODE=$1
|
||||
[[ -z "$MODE" ]] && read -p "Enter the MODE(LTE or 5G): " MODE
|
||||
|
||||
if [ $MODE = LTE ]; then
|
||||
cd $WORKSPACE/bin/lte/l1/
|
||||
fi
|
||||
if [ $MODE = 5G ]; then
|
||||
cd $WORKSPACE/bin/nr5g/gnb/l1
|
||||
fi
|
||||
EOF
|
||||
|
||||
cat > docker-image-building/set-l2-env.sh << 'EOF'
|
||||
# source this script to l2 binary location
|
||||
|
||||
export WORKSPACE=/root/flexran
|
||||
export isa=avx512
|
||||
|
||||
cd $WORKSPACE
|
||||
source ./set_env_var.sh -i ${isa}
|
||||
|
||||
MODE=$1
|
||||
[[ -z "$MODE" ]] && read -p "Enter the MODE(LTE or 5G): " MODE
|
||||
|
||||
if [ $MODE = LTE ]; then
|
||||
cd $WORKSPACE/bin/lte/testmac/
|
||||
fi
|
||||
if [ $MODE = 5G ]; then
|
||||
cd $WORKSPACE/bin/nr5g/gnb/testmac
|
||||
fi
|
||||
EOF
|
||||
|
||||
cat > docker-image-building/res-setup.sh << 'EOF'
|
||||
#!/bin/bash
|
||||
|
||||
[[ -z "$PCIDEVICE_INTEL_COM_INTEL_ACC100_FEC" ]] && { echo "ACC100 not used, sleep..."; sleep infinity; }
|
||||
|
||||
sed -i 's#.*dpdkBasebandFecMode.*# <dpdkBasebandFecMode\>1</dpdkBasebandFecMode>#' /root/flexran/bin/nr5g/gnb/l1/phycfg_timer.xml
|
||||
sed -i 's#.*dpdkBasebandDevice.*# <dpdkBasebandDevice\>'"$PCIDEVICE_INTEL_COM_INTEL_ACC100_FEC"'</dpdkBasebandDevice>#' /root/flexran/bin/nr5g/gnb/l1/phycfg_timer.xml
|
||||
|
||||
echo "Resource setup Completed, sleep..."
|
||||
sleep infinity
|
||||
EOF
|
||||
|
||||
chmod a+x docker-image-building/res-setup.sh
|
||||
|
||||
mkdir docker-image-building/rootdir
|
||||
mv docker-image-building/res-setup.sh docker-image-building/rootdir
|
||||
mv docker-image-building/set-l1-env.sh docker-image-building/rootdir
|
||||
mv docker-image-building/set-l2-env.sh docker-image-building/rootdir
|
||||
|
||||
cat > docker-image-building/Dockerfile << 'EOF'
|
||||
FROM centos:7.9.2009
|
||||
|
||||
RUN [ -e /etc/yum.conf ] && sed -i '/tsflags=nodocs/d' /etc/yum.conf || true
|
||||
|
||||
RUN yum install -y libhugetlbfs* libstdc++* numa* gcc g++ iproute \
|
||||
module-init-tools kmod pciutils python libaio libaio-devel \
|
||||
numactl-devel nettools ethtool
|
||||
RUN yum clean all
|
||||
|
||||
COPY stuff/libs/* /usr/lib64/
|
||||
|
||||
WORKDIR /root/
|
||||
COPY stuff/flexran ./flexran
|
||||
COPY stuff/tests ./flexran/tests
|
||||
COPY rootdir/* ./
|
||||
|
||||
CMD ["/root/res-setup.sh"]
|
||||
EOF
|
||||
|
||||
cat > Dockerfile << 'EOF'
|
||||
FROM centos:7.9.2009
|
||||
|
||||
RUN [ -e /etc/yum.conf ] && sed -i '/tsflags=nodocs/d' /etc/yum.conf || true
|
||||
|
||||
RUN yum groupinstall -y 'Development Tools'
|
||||
|
||||
RUN yum install -y vim gcc-c++ libhugetlbfs* libstdc++* kernel-devel numa* gcc git mlocate \
|
||||
cmake wget ncurses-devel hmaccalc zlib-devel binutils-devel elfutils-libelf-devel \
|
||||
numactl-devel libhugetlbfs-devel bc patch git patch tar zip unzip python3 sudo docker
|
||||
|
||||
RUN yum install -y gtk3 mesa-libgbm at-spi2-core libdrm xdg-utils libxcb libnotify
|
||||
|
||||
RUN yum install -y centos-release-scl
|
||||
RUN yum install -y devtoolset-8
|
||||
|
||||
RUN yum clean all
|
||||
|
||||
RUN pip3 install meson && \
|
||||
pip3 install ninja pyelftools
|
||||
|
||||
# ENV HTTP_PROXY=""
|
||||
# ENV HTTPS_PROXY=""
|
||||
|
||||
WORKDIR /usr/src/
|
||||
RUN git clone https://github.com/pkgconf/pkgconf.git
|
||||
WORKDIR /usr/src/pkgconf
|
||||
RUN ./autogen.sh && ./configure && make && make install
|
||||
|
||||
WORKDIR /usr/src/
|
||||
RUN git clone git://git.kernel.org/pub/scm/utils/rt-tests/rt-tests.git
|
||||
WORKDIR /usr/src/rt-tests
|
||||
RUN git checkout stable/v1.0
|
||||
RUN make all && make install
|
||||
|
||||
COPY docker-image-building /root/docker-image-building
|
||||
|
||||
WORKDIR /opt
|
||||
|
||||
# Set default command
|
||||
CMD ["/usr/bin/bash"]
|
||||
EOF
|
||||
|
||||
# build the Docker image for FlexRAN building environment
|
||||
orgname=somename
|
||||
docker build -t flexran-builder .
|
||||
docker tag flexran-builder ${orgname}/flexran-builder:21.11
|
||||
docker login
|
||||
docker push ${orgname}/flexran-builder:21.11
|
||||
|
||||
********************
|
||||
Build FlexRAN in Pod
|
||||
********************
|
||||
|
||||
#. Use a shell inside Pod to build FlexRAN:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
kubectl exec -it buildpod -- bash
|
||||
|
||||
#. Use ``scp`` to copy the FlexRAN related files into the pod's |PVC|:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
mkdir -p /opt/fb/scratch && cd /opt/fb/scratch
|
||||
scp <options> FlexRAN-21.11.tar.gz.part00 .
|
||||
scp <options> FlexRAN-21.11.tar.gz.part01 .
|
||||
scp <options> dpdk_patch_21.11.patch .
|
||||
|
||||
cat FlexRAN-21.11.tar.gz.part00 FlexRAN-21.11.tar.gz.part01 > FlexRAN-21.11.tar.gz
|
||||
rm FlexRAN-21.11.tar.gz.part00
|
||||
rm FlexRAN-21.11.tar.gz.part01
|
||||
|
||||
#. Copy |DPDK| source code into the pod's |PVC|:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
cd /opt && wget http://static.dpdk.org/rel/dpdk-20.11.3.tar.xz
|
||||
tar xf dpdk-20.11.3.tar.xz
|
||||
mv dpdk-stable-20.11.3/ /opt/fb/dpdk-flxr-21.11
|
||||
cd /opt/fb/dpdk-flxr-21.11
|
||||
patch -p1 < /opt/fb/scratch/dpdk_patch_21.11.patch
|
||||
|
||||
#. Install oneAPI (ICX) Compiler:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
cd /opt/fb/scratch/
|
||||
|
||||
wget https://registrationcenterdownload.intel.com/akdlm/irc_nas/18236/l_BaseKit_p_2021.4.0.3422_offline.sh
|
||||
chmod a+x l_BaseKit_p_2021.4.0.3422_offline.sh
|
||||
|
||||
./l_BaseKit_p_2021.4.0.3422_offline.sh -a -s --eula accept --install-dir /opt/fb/intel/oneapi
|
||||
|
||||
#. Extract FlexRAN and populate the environment variables:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
cd /opt/fb/scrach/ && tar zxvf FlexRAN-21.11.tar.gz && ./extract.sh
|
||||
# input '/opt/fb/flexran' for Extract destination directory
|
||||
|
||||
cd /opt/fb/flexran/
|
||||
|
||||
# apply following patch to set_env_var.sh
|
||||
cat > set_env_icx.diff << 'EOF'
|
||||
|
||||
diff --git a/set_env_var.sh b/set_env_var.sh
|
||||
index 38ac4e4..6f475d3 100755
|
||||
--- a/set_env_var.sh
|
||||
+++ b/set_env_var.sh
|
||||
@@ -132,30 +132,6 @@ echo ""
|
||||
# Set ICC and DPDK environment
|
||||
if [ $set_dependencies -eq 1 ]; then
|
||||
if [ $continue_run -eq 1 ]; then
|
||||
- # ICC
|
||||
- if [ ! -f "$icc_file" ]
|
||||
- then
|
||||
- read -p 'Enter Intel SystemStudio / ParallelStudio Install Directory for icc, or just enter to set default ' val
|
||||
- if [ -z "$val" ]; then
|
||||
- val=$icc_default_path
|
||||
- fi
|
||||
- else
|
||||
- val=`cat $icc_file`
|
||||
- fi
|
||||
-
|
||||
- if [ -f "$val/bin/iccvars.sh" ]; then
|
||||
- icc_path=$val
|
||||
- echo "sourcing $icc_path/bin/iccvars.sh intel64 -platform linux"
|
||||
- source $icc_path/bin/iccvars.sh intel64 -platform linux
|
||||
- echo $icc_path > $icc_file
|
||||
- else
|
||||
- echo "ICC Directory $val is invalid"
|
||||
- rm -rf $icc_file
|
||||
- continue_run=0
|
||||
- fi
|
||||
- fi
|
||||
-
|
||||
- if [ $continue_run -eq 1 ]; then
|
||||
#DPDK
|
||||
if [ ! -f "$dpdk_file" ]
|
||||
then
|
||||
@@ -188,7 +164,7 @@ fi
|
||||
|
||||
# Validate ISA
|
||||
if [ $continue_run -eq 1 ]; then
|
||||
- export WIRELESS_SDK_TOOLCHAIN=icc
|
||||
+ export WIRELESS_SDK_TOOLCHAIN=icx
|
||||
case $target_isa in
|
||||
avx2)
|
||||
export WIRELESS_SDK_TARGET_ISA=avx2
|
||||
|
||||
EOF
|
||||
patch -p1 < set_env_icx.diff
|
||||
|
||||
source ./set_env_var.sh -d
|
||||
# When following promote message shows:
|
||||
# Enter DPDK Install Directory, or just enter to set default
|
||||
# input: /opt/fb/dpdk-flxr-21.11
|
||||
|
||||
# populate oneapi environment variables also
|
||||
source /opt/fb/intel/oneapi/setvars.sh
|
||||
|
||||
#. Switch to devtoolset-8 environment:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
scl enable devtoolset-8 bash
|
||||
|
||||
#. Build FlexRAN SDK:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
cd /opt/fb/flexran && ./flexran_build.sh -e -r 5gnr -m sdk
|
||||
|
||||
#. Build |DPDK| with the FlexRAN patch:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
cd /opt/fb/dpdk-flxr-21.11 && meson build
|
||||
cd /opt/fb/dpdk-flxr-21.11/build && meson configure -Dflexran_sdk=/opt/fb/flexran/sdk/build-avx512-icx/install && ninja
|
||||
|
||||
#. Build the FlexRAN applications:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
cd /opt/fb/flexran
|
||||
|
||||
# Linux 5.6 deprecated ioremap_nocache, need to change to use ioremap_cache instead
|
||||
sed -i 's#ioremap_nocache#ioremap_cache#g' ./libs/cpa/mmw/rec/drv/src/nr_dev.c
|
||||
|
||||
# compile all available modules for 5gnr
|
||||
./flexran_build.sh -e -r 5gnr
|
||||
|
||||
|
||||
*******************************************
|
||||
Generate Docker image with FlexRAN binaries
|
||||
*******************************************
|
||||
|
||||
.. note::
|
||||
|
||||
Since host path ``/var/run/docker.sock`` has been mounted into the building
|
||||
pod, you can build the Docker image using the FlexRAN binaries from the
|
||||
previous step inside the building pod. The artifacts used
|
||||
by :command:`docker build` have been integrated into the build image and
|
||||
are ready to use.
|
||||
|
||||
#. Prepare the env var for the script in ``/root/docker-image-building/transport.sh``:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
source /opt/fb/intel/oneapi/setvars.sh
|
||||
cd /opt/fb/flexran && source ./set_env_var.sh -d
|
||||
|
||||
#. Prepare binaries and scripts for Docker build:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
cd /root/docker-image-building
|
||||
./transport.sh
|
||||
|
||||
#. Build Docker image which will be saved in local host:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
docker build -t flr-run -f Dockerfile .
|
||||
|
||||
|
||||
*********************************
|
||||
Run the FlexRAN Test cases in Pod
|
||||
*********************************
|
||||
|
||||
After the build and Docker image generation steps above, you can launch the
|
||||
FlexRAN execution pod from the host.
|
||||
|
||||
#. Push the Docker image to a registry, for example, `dockerhub.io <https://hub.docker.com/>`__:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
docker login
|
||||
orgname=somename
|
||||
docker tag flr-run ${orgname}/flr-run:v1
|
||||
docker push ${orgname}/flr-run:v1
|
||||
|
||||
#. Launch the FlexRAN Pod.
|
||||
|
||||
Adjust the CPU and memory for your configuration.
|
||||
Memory should be more than 32Gi for the test case pass rate.
|
||||
|
||||
.. note::
|
||||
|
||||
``command`` should not be used in the spec, otherwise it will overwrite
|
||||
the default container command which does accelerator |PCI| address
|
||||
filling for L1.
|
||||
|
||||
.. code:: bash
|
||||
|
||||
cat > runpod-flxr.yml << 'EOF'
|
||||
apiVersion: v1
|
||||
kind: Pod
|
||||
metadata:
|
||||
name: runpod
|
||||
annotations:
|
||||
spec:
|
||||
restartPolicy: Never
|
||||
containers:
|
||||
- name: runpod
|
||||
image: somename/flr-run:v1
|
||||
imagePullPolicy: IfNotPresent
|
||||
volumeMounts:
|
||||
- mountPath: /hugepages
|
||||
name: hugepage
|
||||
securityContext:
|
||||
privileged: false
|
||||
capabilities:
|
||||
add:
|
||||
["IPC_LOCK", "SYS_ADMIN", "SYS_NICE"]
|
||||
resources:
|
||||
requests:
|
||||
memory: 32Gi
|
||||
hugepages-1Gi: 6Gi
|
||||
intel.com/intel_acc100_fec: '1'
|
||||
limits:
|
||||
memory: 32Gi
|
||||
hugepages-1Gi: 6Gi
|
||||
intel.com/intel_acc100_fec: '1'
|
||||
volumes:
|
||||
- name: hugepage
|
||||
emptyDir:
|
||||
medium: HugePages
|
||||
EOF
|
||||
|
||||
kubectl create -f runpod-flxr.yml
|
||||
|
||||
#. Execute L1.
|
||||
|
||||
#. Enter the L1 directory inside Pod:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
kubectl exec -it runpod -- bash
|
||||
source set-l1-env.sh 5G
|
||||
|
||||
|
||||
#. Edit L1 configuration file:
|
||||
|
||||
.. note::
|
||||
|
||||
``phycfg_timer.xml`` has been modified by entry script to use the FEC
|
||||
accelerator: ``<dpdkBasebandFecMode>1</dpdkBasebandFecMode>``
|
||||
``<dpdkBasebandDevice>0000:8b:00.0</dpdkBasebandDevice>``
|
||||
|
||||
This configuration is scripted and runs automatically, no manual
|
||||
configuration is needed. You can use :command:`printenv
|
||||
PCIDEVICE_INTEL_COM_INTEL_ACC100_FEC` to check dpdkBasebandDevice.
|
||||
|
||||
.. code:: console
|
||||
|
||||
# change default CPU binding in section of <Threads> in phycfg_timer.xml
|
||||
# use the first 3 assigned CPUs for the Applications threads
|
||||
|
||||
<!-- CPU Binding to Application Threads -->
|
||||
<Threads>
|
||||
<!-- System Threads (Single core id value): Core, priority, Policy [0: SCHED_FIFO 1: SCHED_RR] -->
|
||||
<systemThread>2, 0, 0</systemThread>
|
||||
|
||||
<!-- Timer Thread (Single core id value): Core, priority, Policy [0: SCHED_FIFO 1: SCHED_RR] -->
|
||||
<timerThread>3, 96, 0</timerThread>
|
||||
|
||||
<!-- FPGA for LDPC Thread (Single core id value): Core, priority, Policy [0: SCHED_FIFO 1: SCHED_RR] -->
|
||||
<FpgaDriverCpuInfo>4, 96, 0</FpgaDriverCpuInfo>
|
||||
|
||||
<!-- FPGA for Front Haul (FFT / IFFT) Thread (Single core id value): Core, priority, Policy [0: SCHED_FIFO 1: SCHED_RR] -->
|
||||
<!-- This thread should be created for timer mode and hence can be same core as LDPC polling core -->
|
||||
<FrontHaulCpuInfo>4, 96, 0</FrontHaulCpuInfo>
|
||||
|
||||
<!-- DPDK Radio Master Thread (Single core id value): Core, priority, Policy [0: SCHED_FIFO 1: SCHED_RR] -->
|
||||
<radioDpdkMaster>2, 99, 0</radioDpdkMaster>
|
||||
</Threads>
|
||||
|
||||
|
||||
#. Run L1 application:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
# launch L1app
|
||||
./l1.sh -e
|
||||
|
||||
#. Execute testmac after L1 is up and running in another terminal.
|
||||
|
||||
#. Enter the testmac directory inside Pod:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
kubectl exec -it runpod -- bash
|
||||
source set-l2-env.sh 5G
|
||||
|
||||
#. Edit testmac configuration file:
|
||||
|
||||
.. code:: console
|
||||
|
||||
# Modify default CPU binding in section of <Threads> in testmac_cfg.xml
|
||||
# Make sure to use the CPU from the CPU whose ID is bigger than 13,
|
||||
# this way, the Application Threads will not overlap with the BBUPool CPUs.
|
||||
<!-- CPU Binding to Application Threads -->
|
||||
<Threads>
|
||||
<!-- Wireless Subsystem Thread: Core, priority, Policy [0: SCHED_FIFO 1: SCHED_RR] -->
|
||||
<wlsRxThread>16, 90, 0</wlsRxThread>
|
||||
|
||||
<!-- System Threads: Core, priority, Policy [0: SCHED_FIFO 1: SCHED_RR] -->
|
||||
<systemThread>14, 0, 0</systemThread>
|
||||
|
||||
<!-- TestMac Run Thread: Core, priority, Policy [0: SCHED_FIFO 1: SCHED_RR] -->
|
||||
<runThread>14, 89, 0</runThread>
|
||||
|
||||
<!-- Thread to send / receive URLLC APIS to / from testmac to Phy. It will be created only when the phy_config has URLLC Support added to it: Core, priority, Policy [0: SCHED_FIFO 1: SCHED_RR] -->
|
||||
<urllcThread>15, 90, 0</urllcThread>
|
||||
</Threads>
|
||||
|
||||
# workaround the known issue of parsing zero value in the config file
|
||||
sed -i '/>0</d' testmac_cfg.xml
|
||||
|
||||
#. Run testmac application:
|
||||
|
||||
.. code:: bash
|
||||
|
||||
# launch testmac
|
||||
./l2.sh --testfile=icelake-sp/icxsp_mu1_100mhz_mmimo_64x64_16stream_hton.cfg
|
||||
|
||||
# Note, case of 3389 is the most stringent case, we can comment out
|
||||
# other cases in the file and run this case directly:
|
||||
# TEST_FD, 3389, 3, 5GNR, fd/mu1_100mhz/383/fd_testconfig_tst383.cfg,
|
||||
# 5GNR, fd/mu1_100mhz/386/fd_testconfig_tst386.cfg,
|
||||
# 5GNR, fd/mu1_100mhz/386/fd_testconfig_tst386.cfg
|
||||
|
||||
.. note::
|
||||
|
||||
For detailed explanation of the XML configuration used by L1, refer to the
|
||||
FlexRAN documentation available at:
|
||||
https://www.intel.com/content/www/us/en/developer/topic-technology/edge-5g/tools/flexran.html
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
===========================
|
||||
Deploy FlexRAN on StarlingX
|
||||
===========================
|
||||
|
||||
.. deployflexran-begin
|
||||
|
||||
This guide describes how to build and deploy different versions of FlexRAN
|
||||
applications on the |prod| platform.
|
||||
|
||||
.. deployflexran-end
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
deploy-flexran-2107-on-starlingx-c4efa00b1b98
|
||||
deploy-flexran-2111-on-starlingx-ca139fa4e285
|
||||
|
|
@ -9,6 +9,6 @@ This guide describes how to build and deploy sample applications on the |prod| p
|
|||
.. sampleapp-end
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
:maxdepth: 2
|
||||
|
||||
deploy-flexran-on-starlingx-c4efa00b1b98
|
||||
flexran/index
|
||||
|
|
|
|||
Loading…
Reference in New Issue