From 8144703e08d72405d95e30fe0b84ebc9bcf30ec9 Mon Sep 17 00:00:00 2001 From: Ngairangbam Mili Date: Fri, 12 Apr 2024 03:43:01 +0000 Subject: [PATCH] Remove the step to manually add a route on compute nodes to access ldap (dsr8MR3) Change-Id: If415a2cdab2788bb9a437cc9b809bfd4574b03d3 Signed-off-by: Ngairangbam Mili --- ...ng-redfish-platform-management-service.rst | 88 ++----------------- ...ut-redfish-platform-management-service.rst | 79 +---------------- ...th-redfish-platform-management-service.rst | 77 ---------------- ...t-with-local-installation-4982449058d5.rst | 77 ---------------- 4 files changed, 6 insertions(+), 315 deletions(-) diff --git a/doc/source/dist_cloud/kubernetes/installing-a-subcloud-using-redfish-platform-management-service.rst b/doc/source/dist_cloud/kubernetes/installing-a-subcloud-using-redfish-platform-management-service.rst index d405952db..fa565bca6 100644 --- a/doc/source/dist_cloud/kubernetes/installing-a-subcloud-using-redfish-platform-management-service.rst +++ b/doc/source/dist_cloud/kubernetes/installing-a-subcloud-using-redfish-platform-management-service.rst @@ -72,9 +72,9 @@ subcloud, the subcloud installation has these phases: patch level as the system controller. This ensures that the subcloud boot image aligns with the patch level of the load to be installed on the subcloud. - + .. warning:: - + If the patch level of load-imported ISO does not match the system controller patch level, the subcloud patch state may not align with the system controller patch state. @@ -126,11 +126,11 @@ Controlling the RVMC debug level and automatic serial console log capture The optional parameter, ``rvmc_debug_level``, in the subcloud install_values YAML file, controls the generation of debug logs during |RVMC| installation, -which are then stored in the ansible log files for each subcloud. +which are then stored in the ansible log files for each subcloud. **Valid rvmc_debug_levels** -The available ``rvmc_debug_level`` values control the log content as follows. +The available ``rvmc_debug_level`` values control the log content as follows. Note that the log levels increase in verbosity as they increase: @@ -152,7 +152,7 @@ logs. When the ``rvmc_debug_level`` is enabled (``rvmc_debug_level`` > 0), the full serial console output can be automatically captured, provided the serial console is -configured in the 'install_type' install value. +configured in the ``install_type`` install value. .. note:: Capturing graphical console output is not supported. @@ -563,81 +563,3 @@ subcloud ansible log files: ``/var/log/dcmanager/ansible``, and named as - For more information on bootstrapping and deploying, see the procedures listed under :ref:`install-a-subcloud`. - -- Add static route for nodes in subcloud to access openldap service. - - In a Distributed Cloud system, openldap service is running on Central - Cloud. In order for the nodes in the subclouds to access openldap service, - such as ssh to the nodes as openldap users, a static route to the System - Controller is required to be added in these nodes. This applies to - controller nodes, worker nodes and storage nodes (nodes that have sssd - running). - - The static route can be added on each of the nodes in the subcloud using system - CLI. - - The following examples show how to add the static route in controller node and - worker node: - - .. code-block:: none - - [sysadmin@controller-0 ~(keystone_admin)]$ system host-route-add controller-0 mgmt0 64 - [sysadmin@controller-0 ~(keystone_admin)]$ system host-route-add compute-0 mgmt0 64 - - The static route can also be added using Deployment Manager by adding the - route in its configuration file. - - The following examples show adding the route configuration in controller - and worker host profiles of the deployment manager's configuration file: - - .. code-block:: none - - Controller node: - --- - apiVersion: starlingx.windriver.com/v1 - kind: HostProfile - metadata: - labels: - controller-tools.k8s.io: "1.0" - name: controller-0-profile - namespace: deployment - spec: - administrativeState: unlocked - bootDevice: /dev/disk/by-path/pci-0000:c3:00.0-nvme-1 - console: ttyS0,115200n8 - installOutput: text - ...... - routes: - - gateway: - activeinterface: mgmt0 - metric: 1 - prefix: 64 - subnet: - - Worker node: - --- - apiVersion: starlingx.windriver.com/v1 - kind: HostProfile - metadata: - labels: - controller-tools.k8s.io: "1.0" - name: compute-0-profile - namespace: deployment - spec: - administrativeState: unlocked - boardManagement: - credentials: - password: - secret: bmc-secret - type: dynamic - bootDevice: /dev/disk/by-path/pci-0000:00:1f.2-ata-1.0 - clockSynchronization: ntp - console: ttyS0,115200n8 - installOutput: text - ...... - routes: - - gateway: - interface: mgmt0 - metric: 1 - prefix: 64 - subnet: diff --git a/doc/source/dist_cloud/kubernetes/installing-a-subcloud-without-redfish-platform-management-service.rst b/doc/source/dist_cloud/kubernetes/installing-a-subcloud-without-redfish-platform-management-service.rst index 2f8f63ea7..094a1778d 100644 --- a/doc/source/dist_cloud/kubernetes/installing-a-subcloud-without-redfish-platform-management-service.rst +++ b/doc/source/dist_cloud/kubernetes/installing-a-subcloud-without-redfish-platform-management-service.rst @@ -251,7 +251,7 @@ subcloud, the subcloud installation process has two phases: between the subcloud and system controller, then the ``management_gateway_address`` parameter should be replaced with admin subnet information. - + For example: .. code-block:: none @@ -358,80 +358,3 @@ subcloud, the subcloud installation process has two phases: - For more information on bootstrapping and deploying, see the procedures listed under :ref:`install-a-subcloud`. - -- Add static route for nodes in subcloud to access openldap service. - - In DC system, openldap service is running on Central Cloud. In order for the nodes - in the subclouds to access openldap service, such as ssh to the nodes as openldap - users, a static route to the system controller is required to be added in these - nodes. This applies to controller nodes, worker nodes and storage nodes (nodes - that have sssd running). - - The static route can be added on each of the nodes in the subcloud using system - CLI. - - The following examples show how to add the static route in controller node and - worker node: - - .. code-block:: none - - system host-route-add controller-0 mgmt0 64 - system host-route-add compute-0 mgmt0 64 - - The static route can also be added using Deployment Manager by adding the route - in its configuration file. - - The following examples show adding the route configuration in controller and - worker host profiles of the deployment manager's configuration file: - - .. code-block:: none - - Controller node: - --- - apiVersion: starlingx.windriver.com/v1 - kind: HostProfile - metadata: - labels: - controller-tools.k8s.io: "1.0" - name: controller-0-profile - namespace: deployment - spec: - administrativeState: unlocked - bootDevice: /dev/disk/by-path/pci-0000:c3:00.0-nvme-1 - console: ttyS0,115200n8 - installOutput: text - ...... - routes: - - gateway: - activeinterface: mgmt0 - metric: 1 - prefix: 64 - subnet: - - Worker node: - --- - apiVersion: starlingx.windriver.com/v1 - kind: HostProfile - metadata: - labels: - controller-tools.k8s.io: "1.0" - name: compute-0-profile - namespace: deployment - spec: - administrativeState: unlocked - boardManagement: - credentials: - password: - secret: bmc-secret - type: dynamic - bootDevice: /dev/disk/by-path/pci-0000:00:1f.2-ata-1.0 - clockSynchronization: ntp - console: ttyS0,115200n8 - installOutput: text - ...... - routes: - - gateway: - interface: mgmt0 - metric: 1 - prefix: 64 - subnet: diff --git a/doc/source/dist_cloud/kubernetes/reinstalling-a-subcloud-with-redfish-platform-management-service.rst b/doc/source/dist_cloud/kubernetes/reinstalling-a-subcloud-with-redfish-platform-management-service.rst index f6dcd0103..f7b7788b8 100644 --- a/doc/source/dist_cloud/kubernetes/reinstalling-a-subcloud-with-redfish-platform-management-service.rst +++ b/doc/source/dist_cloud/kubernetes/reinstalling-a-subcloud-with-redfish-platform-management-service.rst @@ -209,80 +209,3 @@ Executing the dcmanager subcloud reinstall command in the Central Cloud: - For more information on bootstrapping and deploying, see the procedures listed under :ref:`install-a-subcloud`. - -- Add static route for nodes in subcloud to access openldap service. - - In DC system, openldap service is running on Central Cloud. In order for the nodes - in the subclouds to access openldap service, such as ssh to the nodes as openldap - users, a static route to the System Controller is required to be added in these - nodes. This applies to controller nodes, worker nodes and storage nodes (nodes - that have sssd running). - - The static route can be added on each of the nodes in the subcloud using system - CLI. - - The following examples show how to add the static route in controller node and - worker node: - - .. code-block:: none - - system host-route-add controller-0 mgmt0 64 - system host-route-add compute-0 mgmt0 64 - - The static route can also be added using Deployment Manager by adding the route - in its configuration file. - - The following examples show adding the route configuration in controller and - worker host profiles of the deployment manager's configuration file: - - .. code-block:: none - - Controller node: - --- - apiVersion: starlingx.windriver.com/v1 - kind: HostProfile - metadata: - labels: - controller-tools.k8s.io: "1.0" - name: controller-0-profile - namespace: deployment - spec: - administrativeState: unlocked - bootDevice: /dev/disk/by-path/pci-0000:c3:00.0-nvme-1 - console: ttyS0,115200n8 - installOutput: text - ...... - routes: - - gateway: - activeinterface: mgmt0 - metric: 1 - prefix: 64 - subnet: - - Worker node: - --- - apiVersion: starlingx.windriver.com/v1 - kind: HostProfile - metadata: - labels: - controller-tools.k8s.io: "1.0" - name: compute-0-profile - namespace: deployment - spec: - administrativeState: unlocked - boardManagement: - credentials: - password: - secret: bmc-secret - type: dynamic - bootDevice: /dev/disk/by-path/pci-0000:00:1f.2-ata-1.0 - clockSynchronization: ntp - console: ttyS0,115200n8 - installOutput: text - ...... - routes: - - gateway: - interface: mgmt0 - metric: 1 - prefix: 64 - subnet: \ No newline at end of file diff --git a/doc/source/dist_cloud/kubernetes/subcloud-deployment-with-local-installation-4982449058d5.rst b/doc/source/dist_cloud/kubernetes/subcloud-deployment-with-local-installation-4982449058d5.rst index ddfde930a..cfcf961bb 100644 --- a/doc/source/dist_cloud/kubernetes/subcloud-deployment-with-local-installation-4982449058d5.rst +++ b/doc/source/dist_cloud/kubernetes/subcloud-deployment-with-local-installation-4982449058d5.rst @@ -82,83 +82,6 @@ components and produces a 'Prestaging ISO'. - For more information on bootstrapping and deploying, see the procedures listed under :ref:`install-a-subcloud`. -- Add static route for nodes in subcloud to access openldap service. - - In DC system, openldap service is running on Central Cloud. In order for the nodes - in the subclouds to access openldap service, such as ssh to the nodes as openldap - users, a static route to the System Controller is required to be added in these - nodes. This applies to controller nodes, worker nodes and storage nodes (nodes - that have sssd running). - - The static route can be added on each of the nodes in the subcloud using system - CLI. - - The following examples show how to add the static route in controller node and - worker node: - - .. code-block:: none - - system host-route-add controller-0 mgmt0 64 - system host-route-add compute-0 mgmt0 64 - - The static route can also be added using Deployment Manager by adding the route - in its configuration file. - - The following examples show adding the route configuration in controller and - worker host profiles of the deployment manager's configuration file: - - .. code-block:: none - - Controller node: - --- - apiVersion: starlingx.windriver.com/v1 - kind: HostProfile - metadata: - labels: - controller-tools.k8s.io: "1.0" - name: controller-0-profile - namespace: deployment - spec: - administrativeState: unlocked - bootDevice: /dev/disk/by-path/pci-0000:c3:00.0-nvme-1 - console: ttyS0,115200n8 - installOutput: text - ...... - routes: - - gateway: - activeinterface: mgmt0 - metric: 1 - prefix: 64 - subnet: - - Worker node: - --- - apiVersion: starlingx.windriver.com/v1 - kind: HostProfile - metadata: - labels: - controller-tools.k8s.io: "1.0" - name: compute-0-profile - namespace: deployment - spec: - administrativeState: unlocked - boardManagement: - credentials: - password: - secret: bmc-secret - type: dynamic - bootDevice: /dev/disk/by-path/pci-0000:00:1f.2-ata-1.0 - clockSynchronization: ntp - console: ttyS0,115200n8 - installOutput: text - ...... - routes: - - gateway: - interface: mgmt0 - metric: 1 - prefix: 64 - subnet: - .. _local-install-bundle-section: --------------------