129 lines
7.2 KiB
ReStructuredText
129 lines
7.2 KiB
ReStructuredText
|
|
.. ecd1551800000867
|
|
.. _configuring-vlan-interfaces-using-the-cli:
|
|
|
|
=======================================
|
|
Configure VLAN Interfaces Using the CLI
|
|
=======================================
|
|
|
|
You can use the CLI to attach |VLAN| interfaces to networks.
|
|
|
|
.. rubric:: |proc|
|
|
|
|
.. _configuring-vlan-interfaces-using-the-cli-steps-rf5-5wh-lkb:
|
|
|
|
#. List the attached interfaces.
|
|
|
|
To list all interfaces, use the :command:`system host-if-list` command
|
|
and include the ``-a`` flag.
|
|
|
|
.. code-block:: none
|
|
|
|
~(keystone_admin)$ system host-if-list -a controller-0
|
|
+-------------+-----------+-----------+----------+------+----------------+-------------+----------------------------+---------------------------+
|
|
| uuid | name | class | type | vlan | ports | uses i/f | used by i/f | attributes |
|
|
| | | | | id | | | | |
|
|
+-------------+-----------+-----------+----------+------+----------------+-------------+----------------------------+---------------------------+
|
|
| 0aa20d82-...| sriovvf2 | pci-sriov | vf | None | [] | [u'sriov0'] | [] | MTU=1500,max_tx_rate=100 |
|
|
| 0e5f162d-...| mgmt0 | platform | vlan | 163 | [] | [u'sriov0'] | [] | MTU=1500 |
|
|
| 14f2ed53-...| sriov0 | pci-sriov | ethernet | None | [u'enp24s0f0'] | [] | [u'sriovnet1', u'oam0', | MTU=9216 |
|
|
| | | | | | | | u'sriovnet2', u'sriovvf2', | |
|
|
| | | | | | | | u'sriovvf1', u'mgmt0', | |
|
|
| | | | | | | | u'pxeboot0'] | |
|
|
| | | | | | | | | |
|
|
| 163592bd-...| data1 | data | ethernet | None | [u'enp24s0f1'] | [] | [] | MTU=1500,accelerated=True |
|
|
| 1831571d-...| sriovnet2 | pci-sriov | vf | None | [] | [u'sriov0'] | [] | MTU=1956,max_tx_rate=100 |
|
|
| 5741318f-...| eno2 | None | ethernet | None | [u'eno2'] | [] | [] | MTU=1500 |
|
|
| 5bd79fbd-...| enp26s0f0 | None | ethernet | None | [u'enp26s0f0'] | [] | [] | MTU=1500 |
|
|
| 623d5494-...| oam0 | platform | vlan | 103 | [] | [u'sriov0'] | [] | MTU=1500 |
|
|
| 78b4080a-...| enp26s0f1 | None | ethernet | None | [u'enp26s0f1'] | [] | [] | MTU=1500 |
|
|
| a6f1f901-...| eno1 | None | ethernet | None | [u'eno1'] | [] | [] | MTU=1500 |
|
|
| f37eac1b-...| pxeboot0 | platform | ethernet | None | [] | [u'sriov0'] | [] | MTU=1500 |
|
|
| f7c62216-...| sriovnet1 | pci-sriov | vf | None | [] | [u'sriov0'] | [] | MTU=1500,max_tx_rate=100 |
|
|
| fcbe3aca-...| sriovvf1 | pci-sriov | vf | None | [] | [u'sriov0'] | [] | MTU=1956,max_tx_rate=100 |
|
|
+-------------+-----------+-----------+----------+------+----------------+-------------+----------------------------+---------------------------+
|
|
|
|
|
|
#. Create a |VLAN| interface.
|
|
|
|
Use the following command:
|
|
|
|
.. code-block:: none
|
|
|
|
~(keystone_admin)$ system host-if-add <hostname> -V <vlan_id> -c <ifclass> <interface name> <ethname> [<datanetwork>]
|
|
|
|
where the following options are available:
|
|
|
|
**interface name**
|
|
A name or UUID for the interface \(Required\).
|
|
|
|
.. caution::
|
|
To avoid potential internal inconsistencies, do not use upper
|
|
case characters when creating interface names. Some components
|
|
normalize all interface names to lower case.
|
|
|
|
**vlan\_id**
|
|
The |VLAN| identifier for the network.
|
|
|
|
**hostname**
|
|
The name or UUID of the host.
|
|
|
|
**ifclass**
|
|
The class of the interface. The valid classes are **platform**,
|
|
**data**, **pci-sriov**, and **pci-passthrough**.
|
|
|
|
**ethname**
|
|
The name or UUID of the Ethernet interface to use.
|
|
|
|
**datanetworks**
|
|
A list of data networks, delimited by quotes and separated by commas;
|
|
for example, "net-a, net-b". To specify a single data network,
|
|
omit the quotes. This parameter is required only if the <networktype>
|
|
is set to data,pci-sriov or pci-passthru.
|
|
|
|
**network**
|
|
The name or ID of the network to assign the interface to
|
|
|
|
For example, to attach a |VLAN| interface named **clusterhost0** with
|
|
|VLAN| ID **22** to the cluster-host network using Ethernet interface
|
|
**enp0s8** on **storage-0**:
|
|
|
|
.. code-block:: none
|
|
|
|
~(keystone_admin)$ system host-if-add storage-0 -V 22 -c platform clusterhost0 vlan enp0s8
|
|
+------------------+----------------------------------------+
|
|
| Property | Value |
|
|
+------------------+----------------------------------------+
|
|
| ifname | clusterhost0 |
|
|
| ifclass | platform |
|
|
| iftype | vlan |
|
|
| ports | [] |
|
|
| providernetworks | None |
|
|
| imac | 08:00:27:f2:0d:68 |
|
|
| imtu | 1500 |
|
|
| aemode | None |
|
|
| schedpolicy | None |
|
|
| txhashpolicy | None |
|
|
| uuid | 8ca9854e-a18e-4a3c-8afe-f050da702fdf |
|
|
| ihost_uuid | 3d207384-7d30-4bc0-affe-d68ab6a00a5b |
|
|
| vlan_id | 22 |
|
|
| uses | [u'enp0s8'] |
|
|
| used_by | [] |
|
|
| created_at | 2015-02-04T16:23:28.917084+00:00 |
|
|
| updated_at | None |
|
|
+------------------+----------------------------------------+
|
|
|
|
#. Attach the newly created |VLAN| interface to a network.
|
|
|
|
Use a command of the following format:
|
|
|
|
.. code-block:: none
|
|
|
|
~(keystone_admin)$ system interface-network-assign <hostname> <interface name> <network>
|
|
|
|
For example:
|
|
|
|
.. code-block:: none
|
|
|
|
~(keystone_admin)$ system interface-network-assign storage-0 clusterhost0 cluster-host
|