Remove update-iso.sh from starlingx/root repo

The update-iso.sh utility has been moved to starlingx/utilities as
utilities/platform-util/scripts/update-iso.sh and packaged for the
controller.

This update removes it from starlingx/root.

Change-Id: I76564f77db5cb70a1782214485545ba41b912e28
Story: 2006595
Task: 37167
Signed-off-by: Don Penney <don.penney@windriver.com>

build-tools/update-iso.sh

@@ -1,236 +0,0 @@
-#!/bin/bash
-#
-# Copyright (c) 2019 Wind River Systems, Inc.
-#
-# SPDX-License-Identifier: Apache-2.0
-#
-# Utility for updating an ISO
-#
-# This utility supports the following:
-# 1. Provide a custom kickstart post addon, allowing the user
-# to add some custom configuration, such as custom network
-# interface config
-# 2. Add or modify installation boot parameters, such as changing
-# the default boot_device and rootfs_device disks
-#
-
-function usage {
-    cat <<ENDUSAGE
-Usage:
-   $(basename $0) -i <input bootimage.iso> -o <output bootimage.iso>
-                   [ -a <ks-addon.cfg> ] [ -p param=value ]
-        -i <file>: Specify input ISO file
-        -o <file>: Specify output ISO file
-        -a <file>: Specify ks-addon.cfg file
-        -p <p=v>:  Specify boot parameter
-                   Examples:
-                   -p rootfs_device=nvme0n1 -p boot_device=nvme0n1
-
-                   -p rootfs_device=/dev/disk/by-path/pci-0000:00:0d.0-ata-1.0
-                   -p boot_device=/dev/disk/by-path/pci-0000:00:0d.0-ata-1.0
-
-Example ks-addon.cfg, to define a VLAN on initial OAM interface setup:
-#### start ks-addon.cfg
-OAM_DEV=enp0s3
-OAM_VLAN=1234
-
-    cat << EOF > /etc/sysconfig/network-scripts/ifcfg-\$OAM_DEV
-DEVICE=\$OAM_DEV
-BOOTPROTO=none
-ONBOOT=yes
-LINKDELAY=20
-EOF
-
-    cat << EOF > /etc/sysconfig/network-scripts/ifcfg-\$OAM_DEV.\$OAM_VLAN
-DEVICE=\$OAM_DEV.\$OAM_VLAN
-BOOTPROTO=dhcp
-ONBOOT=yes
-VLAN=yes
-LINKDELAY=20
-EOF
-#### end ks-addon.cfg
-
-ENDUSAGE
-}
-
-function check_requirements {
-    local -a required_utils=(
-        rsync
-        guestmount
-        guestunmount
-        mkisofs
-        isohybrid
-        implantisomd5
-    )
-    local -i missing=0
-
-    for req in ${required_utils[@]}; do
-        which ${req} >&/dev/null
-        if [ $? -ne 0 ]; then
-            echo "Unable to find required utility: ${req}" >&2
-            let -i missing++
-        fi
-    done
-
-    if [ ${missing} -gt 0 ]; then
-        echo "One or more required utilities are missing. Aborting..." >&2
-        exit 1
-    fi
-}
-
-function update_parameter {
-    local isodir=$1
-    local param=$2
-    local value=$3
-
-    for f in ${isodir}/isolinux.cfg ${isodir}/syslinux.cfg; do
-        grep -q "^[[:space:]]*append\>.*[[:space:]]${param}=" ${f}
-        if [ $? -eq 0 ]; then
-            # Parameter already exists. Update the value
-            sed -i -e "s#^\([[:space:]]*append\>.*${param}\)=[^[:space:]]*#\1=${value}#" ${f}
-            if [ $? -ne 0 ]; then
-                echo "Failed to update parameter ($param)"
-                exit 1
-            fi
-        else
-            # Parameter doesn't exist. Add it to the cmdline
-            sed -i -e "s|^\([[:space:]]*append\>.*\)|\1 ${param}=${value}|" ${f}
-            if [ $? -ne 0 ]; then
-                echo "Failed to add parameter ($param)"
-                exit 1
-            fi
-        fi
-    done
-}
-
-declare INPUT_ISO=
-declare OUTPUT_ISO=
-declare ORIG_PWD=$PWD
-declare ADDON=
-declare -a PARAMS
-
-while getopts "hi:o:a:p:" opt; do
-    case $opt in
-        i)
-            INPUT_ISO=$OPTARG
-            ;;
-        o)
-            OUTPUT_ISO=$OPTARG
-            ;;
-        a)
-            ADDON=$OPTARG
-            ;;
-        p)
-            PARAMS+=(${OPTARG})
-            ;;
-        *)
-            usage
-            exit 1
-            ;;
-    esac
-done
-
-check_requirements
-
-if [ -z "$INPUT_ISO" -o -z "$OUTPUT_ISO" ]; then
-    usage
-    exit 1
-fi
-
-if [ ! -f ${INPUT_ISO} ]; then
-    echo "Input file does not exist: ${INPUT_ISO}"
-    exit 1
-fi
-
-if [ -f ${OUTPUT_ISO} ]; then
-    echo "Output file already exists: ${OUTPUT_ISO}"
-    exit 1
-fi
-
-shift $((OPTIND-1))
-
-declare MNTDIR=
-declare BUILDDIR=
-declare WORKDIR=
-
-function cleanup {
-    if [ -n "$MNTDIR" -a -d "$MNTDIR" ]; then
-        guestunmount $MNTDIR
-        \rmdir $MNTDIR
-    fi
-
-    if [ -n "$BUILDDIR" -a -d "$BUILDDIR" ]; then
-        \rm -rf $BUILDDIR
-    fi
-
-    if [ -n "$WORKDIR" -a -d "$WORKDIR" ]; then
-        \rm -rf $WORKDIR
-    fi
-}
-
-trap cleanup EXIT
-
-MNTDIR=$(mktemp -d -p $PWD updateiso_mnt_XXXXXX)
-if [ -z "${MNTDIR}" -o ! -d ${MNTDIR} ]; then
-    echo "Failed to create mntdir. Aborting..."
-    exit $rc
-fi
-
-BUILDDIR=$(mktemp -d -p $PWD updateiso_build_XXXXXX)
-if [ -z "${BUILDDIR}" -o ! -d ${BUILDDIR} ]; then
-    echo "Failed to create builddir. Aborting..."
-    exit $rc
-fi
-
-# Mount the ISO
-guestmount -a ${INPUT_ISO} -m /dev/sda1 --ro ${MNTDIR}
-rc=$?
-if [ $rc -ne 0 ]; then
-    echo "Call to guestmount failed with rc=$rc. Aborting..."
-    exit $rc
-fi
-
-rsync -a ${MNTDIR}/ ${BUILDDIR}/
-rc=$?
-if [ $rc -ne 0 ]; then
-    echo "Call to rsync ISO content. Aborting..."
-    exit $rc
-fi
-
-guestunmount ${MNTDIR}
-\rmdir ${MNTDIR}
-
-if [ ${#PARAMS[@]} -gt 0 ]; then
-    for p in ${PARAMS[@]}; do
-        param=${p%%=*} # Strip from the first '=' on
-        value=${p#*=}  # Strip to the first '='
-
-        update_parameter ${BUILDDIR} "${param}" "${value}"
-    done
-fi
-
-if [ -n "${ADDON}" ]; then
-    \rm -f ${BUILDDIR}/ks-addon.cfg
-    \cp ${ADDON} ${BUILDDIR}/ks-addon.cfg
-    if [ $? -ne 0 ]; then
-        echo "Error: Failed to copy ${ADDON}"
-        exit 1
-    fi
-fi
-
-# Rebuild the ISO
-mkisofs -o ${OUTPUT_ISO} \
-    -R -D -A 'oe_iso_boot' -V 'oe_iso_boot' \
-    -quiet \
-    -b isolinux.bin -c boot.cat -no-emul-boot \
-    -boot-load-size 4 -boot-info-table \
-    -eltorito-alt-boot \
-    -e images/efiboot.img \
-    -no-emul-boot \
-    ${BUILDDIR}
-
-isohybrid --uefi ${OUTPUT_ISO}
-implantisomd5 ${OUTPUT_ISO}
-
-echo "Updated ISO: ${OUTPUT_ISO}"
-