test/doc/source/manual_tests/system_inventory/system_inventory_config.rst

System Inventory/Config

sysinv_conf_01

Test ID

sysinv_conf_01

Test Title

change the dns server ip addresses using gui

Tags

sysinv

Testcase Objective

Modify the DNS servers list after installation using Horizon

Test Pre-Conditions

System up and running a DNS server

Test Steps

1. Login to platform horizon with the user 'admin'
2. Go to admin / platform / system configuration / dns / edit DNS
3. In the dialog box, edit the IP addresses and click Save
4. Check the DNS are set and the order is preserved

Expected Behavior

• DNS servers listed in the same order they were entered.

References

N/A

sysinv_conf_03

Test ID

sysinv_conf_03

Test Title

change the ntp server ip addresses using gui

Tags

sysinv

Testcase Objective

Modify the NTP server using Horizon

Test Pre-Conditions

A system up and running a Valid NTP server

Test Steps

1. Login to platform horizon with the user 'admin'
2. Go to admin / platform / system configuration / NTP / edit NTP
3. In the dialog box, edit the domain names or IP addresses and click Save.
4. Lock and unlock the standby controller.
5. Perform a swact
6. Lock and unlock the original controller.

Expected Behavior

3.

• NTP servers are changed
• alarms 250.001 (configuration is out-of-date) are created

4.

• alarm is cleared on standby controller

6.

• alarm is cleared on original controller

References

N/A

sysinv_conf_04

Test ID

sysinv_conf_04

Test Title

change the ntp server ip addresses using cli

Tags

sysinv

Testcase Objective

Modify the NTP server using CLI

Test Pre-Conditions

A system up and running a Valid NTP server

Test Steps

1. Authenticate with platform keystone
2. Change the NTP IP with the ntp-modify command.

system ntp-modify ntpservers=server1[, server2, server3]

3. Check the list

system ntp-show

4. Lock and unlock the standby controller.
5. Perform a swact
6. Lock and unlock the original controller.

Expected Behavior

2.

• NTP servers are changed
• alarms 250.001 (configuration is out-of-date) are created

4.

• alarm is cleared on standby controller

6.

• alarm is cleared on original controller

References

N/A

sysinv_conf_05

Test ID

sysinv_conf_05

Test Title

Enable the ptp service using cli

Tags

sysinv

Testcase Objective

Enable the PTP service using CLI

Test Pre-Conditions

N/A

Test Steps

1. Disable NTP service

system ntp-modify –enabled=false

2. Enable PTP service as legacy

system ptp-modify –mode=legacy –enabled=true

3. lock and unlock all the hosts to clear out of config alarms.

Expected Behavior

3. Hosts should be recoverded correclty

• Verify that host keep alive and there are not constant reboots

References

N/A

sysinv_conf_06

Test ID

sysinv_conf_06

Test Title

Enable the ptp service using gui

Tags

sysinv

Testcase Objective

Enable the PTP service using Horizon

Test Pre-Conditions

N/A

Test Steps

1. Login to platform horizon with the user 'admin'
2. Go to admin / platform / system configuration / PTP / edit PTP
3. In the dialog box, click on the "Enabled" button and click Save.
4. Lock and unlock the standby controller.
5. Perform a swact
6. Lock and unlock the original controller.

Expected Behavior

2.

• PTP service is enabled
• alarms 250.001 (configuration is out-of-date) are created

4.

• alarm is cleared on standby controller

6.

• alarm is cleared on original controller

References

N/A

sysinv_conf_07

Test ID

sysinv_conf_07

Test Title

change the oam ip addresses using cli

Tags

sysinv

Testcase Objective

Modify the OAM IP address using CLI

Test Pre-Conditions

N/A

Test Steps

1. Authenticate with platform keystone
2. Check there are no system alarms
3. Change the IP address on controller-1

system oam-modify key=value

4. Lock and unlock standby controller
5. Perform a swact
6. Lock and unlock the original controller.
7. Check IPs are correctly set

system oam-show

Expected Behavior

3.

• IP address is changed
• alarms 250.001 (configuration is out-of-date) are raised

4.

• alarm is cleared on standby controller

6.

• alarm is cleared on original controller

References

N/A

sysinv_conf_08

Test ID

sysinv_conf_08

Test Title

change the oam ip addresses using gui

Tags

sysinv

Testcase Objective

Modify the OAM IP address using Horizon

Test Pre-Conditions

N/A

Test Steps

1. Login to platform horizon with the user 'admin'
2. Go to admin / platform / system configuration / OAM IP / edit OAM IP
3. In the dialog box, edit the IP address of Controller-1 and click Save.
4. Lock and unlock the standby controller.
5. Perform a swact
6. Lock and unlock the original controller.

Expected Behavior

3.

• controller-1 IP address is changed
• alarms 250.001 (configuration is out-of-date) are raised

4.

• alarm is cleared on standby controller

6.

• alarm is cleared on original controller

References

N/A